Professional Documents
Culture Documents
Project
Materials
Sleepers Bedding sand Wood preservative Nails: 100mmx4.5mm galvanised
D.I.Y.
Install Garden Sleepers
How to Install garden sleepers
EE FR
Tools
Spade and grubber Circular saw Tape measure and level Piece of timber to use as a levelling screed.
If its advice youre after, come in and discuss the project with one of our experts. Ask about organising Same Day Delivery, Tool Hire, Installation or even enrol in one of our D.I.Y. classes.
BUNN317 02/08
How to begin
Mark the bottom sleeper position on the site. Ensure the ground soil is exposed. If not, remove any concrete, paving and grass. Using a space and grubber, shape the sides level and at. Lay a strip of sand 25-50mm deep around the perimeter to the width of the sleeper and screed into a at bed. Establish a level foundation. Use the level on the screed to check. Cut the sleepers to the preferred length with a circular saw. Coat the undersides of the sleeper and any cut ends with the wood preserver. Follow the safety instructions on the product label. Lay the rst sleepers in position. One pair may require trimming to t in between the adjoining pair. Commence to stack the remaining sleepers Skew nail each sleeper to the proceeding one using 100mm x 4.5mm galvanised nails at each end. (See Fig.1) Fill with garden soil up to the underside of the top sleeper. Plant your selection of trees, shrubs, and owers. (See Fig.2) Fig. 2
Please Note: Information in this brochure is Bunnings opinion and we dont warrant the accuracy or completeness of that information. Bunnings excludes all liability in relation to the statements in this brochure.
Fig. 1
For further expert advice consult the qualied Team Members at your local Bunnings Warehouse.