Professional Documents
Culture Documents
ms_office
RNC V200R009
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, please c headquarters.
http://www.huawei.com support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Te
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
4/14/2012
1862
67584496.xls.ms_office
CDMA Reference
pport and service. For any assistance, please contact our local office or company
s been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this docume
4/14/2012
2862
67584496.xls.ms_office
ation, and recommendations in this document do not constitute the warranty of any kind, express or implied.
4/14/2012
3862
67584496.xls.ms_office
Purpose
This describes NodeB parameters, including the meaning, values, and usage of NodeB parameters.
Version
The product version related to this document is: V200R011C00SPC110
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Description Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access
4/14/2012
4862
67584496.xls.ms_office
Service Interrupted During Modification Interruption Scope Interruption Duration (Min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute
4/14/2012
5862
67584496.xls.ms_office
ed in the following aspects. Remarks A simple string for uniquely identifying a parameter The full name of the parameter Net Elements which the parameter is set All the commands that use the parameter; optional/mandatory attribute of the parameter in each command The definition, function, and the reference protocol of the parameter The data type of parameter value: integer, enumeration, and so on The value range on the MML interface; the definition and the applied situations for enumeration values The actual value. For example, if the GUI value is 0, the actual value is OFF. The unit of parameter value The initial value specified by the system Recommended values in different situations The affected range upon modifying the value, such as RAB, IPPATH, CELL The restriction and relation with other parameters, such as, the switches to active the parameter and the value of related parameters Whether this parameter is read/write,read only,or internal.
4/14/2012
6862
67584496.xls.ms_office Modifying the parameters leads to service interruption? The scope where the services are interrupted The approximate duration of service interruption, in the unit of minute Cautions to be taken during the modification The way that you can take it effect. Impact on Radio Network Performance The version that the var appear firstly. Whether this parameter is a radio parameter,a transport parameter,or an equipment parameter.
4/14/2012
7862
67584496.xls.ms_office
4/14/2012
8862
Parameter ID
NE
MML Command
128KRSCLMT
16KRSCLMT
16QAMSW
16QAM Switch
256KRSCLMT
32KRSCLMT
384KRSCLMT
64KRSCLMT
8KRSCLMT
ARPPROXY
ARP Proxy
ACN
SET TMAGAIN(Mandatory) ADD ALD(Optional) SET TILTAER(Optional) SET TMAGAIN(Optional) Antenna Connector SET SASUDCLD(Optional) NodeB No. SET SASUDCSW(Optional) SET SASUGAIN(Optional) SET SASUMODE(Optional) SET TMAMODE(Optional) SET ANTTILT(Optional)
ACVHL
AC Upper Limit(V)
ACVLL
AC Lower Limit(V)
BEAR
Bear Type
BPT
AER
AGTHRESHO AG Threshold LD
AID
Alarm ID
NodeB
AIDST
ALMID
Alarm ID
BRT
Binding Route
ANT1CN
ANT1N
ANT1N
ANT1SRN
ANT2CN
ANT2N
ANT2N
ANT2SRN
ANT3CN
ANT3N
ANT3SRN
ANT4CN
ANT4N
ANT4SRN
ANTM
BT
BER Threshold
AST
AT
Alarm Type
ATMODE
ATTEN
Rx Attenuation Value(dB)
CCTM
Timer_CC(ms)
AUTHMODE
Authentication Mode
AUTOSW
CLKM
Clock Mode
NodeB
SET E1T1WORKMODE(Optional)
AV
Alarm Voltage
AVOL
Alarm Voltage
BAND1
Frequency Band
BAND2
Frequency Band
BAND3
Frequency Band
BAND4
Frequency Band
BAND5
Frequency Band
BAND6
Frequency Band
BASEID11
Base station ID
BASEID20
Base station ID
BC
Battery Capacity
BCD
Boost-Charging Duration
BCLC
Battery Current NodeB ADD BATTERY(Optional) Limiting Coefficient Environment Mode NodeB ADD BATTERY(Mandatory) Temperature alarm NodeB ADD BATTERY(Optional) Upper Limit
EM
TUL
TLL
BCVOL
Boost-charging Voltage
BEAMWIDTH1 Beamwidth 1
BEAMWIDTH1 Beamwidth 2
BEAMWIDTH1 Beamwidth 3
BEAMWIDTH2 Beamwidth 1
BEAMWIDTH2 Beamwidth 2
BEAMWIDTH2 Beamwidth 3
BEAMWIDTH2 Beamwidth 4
DR
Discard Rate
DSTIP
Destination IP Address
DSTMASK
Destination IP Mask
EBS
BEARING
Antenna Bearing
BFLG
BM
Backup Mode
BN
ES
Enable Switch
BRKPOS1
Break Position1
NodeB
SET RRUCHAINBRKPOS(Mandatory)
BRKPOS2
Break Position2
NodeB
SET RRUCHAINBRKPOS(Optional)
ES
Enable Switch
NodeB
SET DHCPRELAYSWITCH(Optional)
BSDF
BSDV
FERAT
BT
Board Type
BT
Board Type
BTEM
CARRIER
Carrier No.
CASE
Scenario
NodeB
FERDT
Frame Error Rate DisappearThreshol NodeB SET ETHPORT(Optional) d of FE MAC Layer Enable state of the NodeB SET CERTFILE(Optional) certificate chain
CCAEnableSta
FLAG
Flag
CertChain
CF
CF
Compress Flag
CHANNEL
Rx Channel No.
CHRSW
CHR Switch
CHRTYPE
CHR Type
CHT
Change Time(S)
CHTP
Type Of Channel
FRAMELEN
IDLE
Timer_Idle(ms)
IFNO
Interface Number
IFT
Interface Type
IMPEDANCE
Line Impedance(ohm)
CLKSRC
CLS
CN
Cabinet No.
ADD AAL2PATH(Optional) ADD ALD(Optional) ADD BACKE1T1(Optional) ADD BRD(Optional) ADD CABINET(Mandatory) ADD DEVIP(Optional) ADD FRAATM(Optional) ADD IMAGRP(Optional) ADD IMALNK(Optional) ADD IP2RSCGRP(Optional) ADD IPCLKLNK(Optional) ADD IPPATH(Optional) ADD IPRT(Optional) ADD LNKSRC(Optional) ADD MPGRP(Optional) ADD MPLNK(Optional) ADD NPSU(Optional) NodeB ADD OBJALMSHLD(Mandatory) ADD OMCH(Optional) ADD PPPLNK(Optional) ADD RRU(Optional) ADD RRUCHAIN(Optional) ADD RSCGRP(Optional) ADD SAALLNK(Optional) ADD SCTPLNK(Optional) ADD SUBRACK(Optional) ADD TREELNKPVC(Optional) ADD TSCROSS(Optional) ADD UNILNK(Optional) ADD CFMMA(Optional) ADD CFMMEP(Optional) ADD ETHTRK(Optional) ADD ETHTRKLNK(Optional) ADD BFDSESSION(Optional)
CN1
CN2
CNB
ADD LOCELL(Optional) Cabinet No. of RRU NodeB ADD SEC(Optional) Begin ADD TXPAIR(Optional)
CNE
ADD LOCELL(Optional) Cabinet No. of RRU NodeB ADD SEC(Optional) End ADD TXPAIR(Optional)
CNE1
Cabinet No. of DL Process Unit 1 Cabinet No. of UL Process Unit 1 Cabinet No. of DL Process Unit 2 Cabinet No. of UL Process Unit 2 Cabinet No. of DL Process Unit 3 Cabinet No. of UL Process Unit 3 Cabinet No. of DL Process Unit 4 Cabinet No. of UL Process Unit 4 CnOp Index
CNE1
CNE2
CNE2
NodeB ADD DLGROUP(Optional) NodeB ADD ULGROUP(Optional) NodeB ADD DLGROUP(Optional) NodeB ADD ULGROUP(Optional) NodeB SET EMGLICENSE(Mandatory)
CNOPNAME
CnOp Name
CONNTYPE
Connection Type
COUNT
Count
COVERTYPE
Cover Type
IP
IP Address
IP
Local IP Address
CQIFA
CRL
CRLEnableSta
Enable state of the NodeB SET CERTFILE(Optional) certificate chain SET PWRSYSCFG(Mandatory) NodeB SET CMUCFG(Mandatory) SET NCMUCFG(Mandatory)
CS
Config State
CSLSDF
Cold Start Load Shutdown Flag Cold Start Load Shutdown Temperature
CSLSDT
CTRLSW
CM Control enable NodeB SET CMCTRLSW(Mandatory) switch Current DA NodeB MOD CURRDA(Optional)
CURRDA
DA
DA
DATE
Installation Date
DATE
Date
DAYS
Days
DBD
Dead band
DCID
DCID1
DCID2
DCLOAD
DC Load(20mA)
DCSWITCH
DC Switch State
DCVHL
DC Upper Limit
DCVLL
DC Lower Limit
DDSTM
DEFPWRLVL
JNRSCGRP
KATM
DEVTP
Device Type
NodeB
DEVTP
Device Type
DEVTP
Device Type
DEVVER
AISG Protocl Version Destination FACH Channel ID Destination FACH Channel ID1 Destination FACH Channel ID2
DFACHID
DFACHID1
DFACHID2
LOCIP
Local IP Address
NodeB
SET IPREMOTELOOP(Mandatory)
DI
Desensitization Intensity
NodeB
DIVM
Diversity Mode
DLDELAY1
DL Time Delay1
DLDELAY2
DL Time Delay2
DLDELAY3
DL Time Delay3
DLDELAY4
DL Time Delay4
DLFREQ
DLGROUPN
DLGROUPNO
LOCIP
Local IP Address
DSCHGT0
0.05C10 Discharge NodeB SET BATCTPA(Optional) Time 0.1C10 Discharge Time NodeB SET BATCTPA(Optional)
DSCHGT1
DSCHGT2
0.2C10 Discharge Time 0.3C10 Discharge Time 0.4C10 Discharge Time 0.5C10 Discharge Time 0.6C10 Discharge Time 0.7C10 Discharge Time 0.8C10 Discharge Time 0.9C10 Discharge Time
DSCHGT3
DSCHGT4
DSCHGT5
DSCHGT6
DSCHGT7
DSCHGT8
DSCHGT9
MASK
IP Address Mask
DST
DSTF
Destination File
MASK
Local IP Mask
MAXCC
MAXLE
MAXPD
DSTML
DSTPN
DSTPN
DSTPN
DSTPT
MCR
DSTSBT
DSTSBT
DSTSN
DSTSN
DSTSRN
MODE
Bearing Mode
NEXTHOP
Next Hop IP
NRTM
OMPRI
OM Priority
DYNCODESW
PCR
ED
End Date
EDAY
End date
EFF
EFFECT
Effect Signal
EM
EMONTH
End month
ENCRYMODE
ENDV
End Voltage
PEERIP
Peer IP Address
PEERMASK
Peer IP Mask
ET
End time
ET
End Time
EWEEK
End week
EWSEQ
FCVOL
Float-charging Voltage
NodeB
SET IPREMOTELOOP(Mandatory)
PLRAT
PLRDT
POLL
Timer_Poll(ms)
FLAG
Enable Flag
FLG
FLR
RRU Floor
PREF
Route Preference
PRIRULE
Priority Rule
RSCGRPID
RT
Route Type
RXBW
Rx Bandwidth(kbps)
SCR
SCR
SIGPRI
Signal Priority
ST
GAIN
GAIN1
Antenna Gain
GAIN2
Antenna Gain
GAIN3
Antenna Gain
GAIN4
Antenna Gain
GPSCD
HCN
TTW
Two Tx Way
HISPM
HLL
HORAD
HPN
Head Port No. Head Interface Board Slot No. Head Subrack No.
HSN
HSRN
HTCP
HTCT
HTDO
HTST
HUL
HZ
RRU Horizontal
ST
SWITCH
Hsdpa Switch
IFOFFSET
IF Offset
TD
Time Delay(5ms)
TIMER
Timer(ms)
TXCLK
Tx Clock
NodeB
SET STM1WORKMODE(Mandatory)
VCI
Bearing VCI
INFNO
Interface No.
VPI
Bearing VPI
CBS
INSTALLID
Installer's ID
ULCIR
DLCIR
DUPLEX
Duplex
IP
IP
FTP Server IP
FRAME
Frame Structure
NodeB
SET E1T1WORKMODE(Optional)
FUNCTION
Function
IPMODE
IP Clock Mode
INSTAG
LM
Loopback Mode
LM
Loopback Mode
LFLG
LIMIT
Alarm Limit
NodeB
SET VSWRALMPARAM(Mandatory)
LL
Lower Limit(V)
LL
LM
Loopback Mode
LNCODE
Line Code
NodeB
SET E1T1WORKMODE(Optional)
LNCODE
Line Code
NodeB
SET E1T1WORKMODE(Optional)
LT
Loopback Time(minute)
PEERIP
Peer IP Address
NodeB
SET IPREMOTELOOP(Mandatory)
SCRAM
Scramble Mode
SPEED
Speed
LN
SRVPRIO
TRAFFIC
Traffic Type
LOCELL
Local Cell ID
BLK LOCELL(Optional) ADD LOCELL(Mandatory) SET RSCLMTPARA(Optional) SET DESENS(Optional) SET MACHSPARA(Optional) SET MACEPARA(Optional) NodeB LST LOCELL(Optional) DSP LOCELL(Optional) DSP LOCELLRES(Optional) UBL LOCELL(Optional) RMV LOCELL(Mandatory) MOD RRUOFLOCELL(Mandatory)
VLANID
VLAN ID
VLANPRIO
VLAN Priority
MTU
NodeB
LOWERLIMIT
LSDF
LSDV
ACFC
NodeB
LTCP
LTEM
LTH
MANUALSW
ADDR
ATM Address
ADDR
ATM Address
ANI
Adjacent Node ID
NodeB
AUTH
Authentication
NodeB
AUTOSWITCH
BEAR
MAXRRUPWR
NodeB
MOD RRUOFLOCELL(Mandatory)
BEAR
Bearing Type
BEAR
Bearing Type
CDVT
CIP
Client IP Address
CLKM
Tx Clock Mode
MINAGCHPO WER
CPPN
MINUTE
Minute
MLL
CPPT
MODE
MODE
TMA Mode
MODE
MODE
Work Mode
MODELNUM
DELAY
DESCRI
Description
NodeB
DHCPSVRIP
DSCP
DSTIP
Destination IP Address
NodeB
MUL
DSTMASK
NodeB
MXPWR
NAME
Name
NAME
Name
SET OUTPORT(Optional) SET TMAGAIN(Mandatory) SET TILTAER(Mandatory) SET SASUDCLD(Mandatory) NodeB SET SASUDCSW(Mandatory) SET SASUGAIN(Mandatory) SET SASUMODE(Mandatory)
NAME
Device Name
NAME
Device Name
NAME
Device Name
DSTRSCGRP
DSTTSN
DSTVCI
DSTVPI
FLAG
Flag
FRAATM
E-HICH HPC Mode NSEHICHPCM for Non-service NodeB SET MACEPARA(Mandatory) OD Radio Links Set
E-HICH HPC NSEHICHPCP Parameters for NonNodeB SET MACEPARA(Optional) ARA service Radio Links Set NSEHICHPO WER E-HICH Power for Non-service Radio NodeB SET MACEPARA(Mandatory) Links Set
NSEHICHPW ROFFSET
E-HICH Power Offset for NonNodeB SET MACEPARA(Mandatory) service Radio Links Set
E-RGCH HPC NSERGCHPC Mode for NonNodeB SET MACEPARA(Mandatory) MOD service Radio Links
E-RGCH HPC NSERGCHPC Parameters for Non- NodeB SET MACEPARA(Optional) PARA service Radio Links E-RGCH Power for NSERGCHPO Non-service Radio NodeB SET MACEPARA(Mandatory) WER Links
E-RGCH Power NSERGCHPW Offset for NonNodeB SET MACEPARA(Mandatory) ROFFSET service Radio Links
FRAMELEN
FRAMODE
Frame Mode
NTDI
NTDO
OBJAID
Object Alarm ID
OBJN
Object No.
OBJTP
Object Type
OCTHD
FRMLEN
Tx Frame Length
OOS
On/Off Status
OOTHD
OPESORT
OPEVER
NodeB SET ALDDEV(Mandatory) SET TILTAER(Optional) SET TMAGAIN(Optional) SET SASUDCLD(Optional) SET SASUDCSW(Optional) NodeB SET SASUGAIN(Optional) SET SASUMODE(Optional) SET TMAMODE(Optional) SET SASUVSWRTHD(Optional) SET ANTTILT(Optional)
OPMODE
Operating Mode
OPTYPE
Operation Type
OTH
IFNO
Interface Number
IFT
Interface Type
IMAGRPN
NodeB
IMALNKN
INSTAG
IP
IP Address
IPHC
IP Header Compress
NodeB
IPMASK
Local IP Mask
NodeB
JNRSCGRP
LN
Link No.
LN
LN
LN
NodeB
LOCALIP
Local IP Address
NodeB
PI
RHUB Port ID
Private Key PKPEnableSta Password Enabled NodeB SET CERTFILE(Optional) State LOCPORT Local SCTP Port NodeB ADD SCTPLNK(Mandatory)
MASK
IP Address Mask
PN
Port No.
PN
Port No.
PN
NPSU No.
PN
Port No.
PN
Port No.
ADD LNKSRC(Optional) ADD DEVIP(Optional) ADD PPPLNK(Optional) ADD FRAATM(Optional) NodeB ADD IPPATH(Optional) ADD MPLNK(Optional) ADD OMCH(Optional) ADD SAALLNK(Optional) ADD BACKE1T1(Optional)
PN
Port No.
SET E1T1LOP(Optional) SET E1T1WORKMODE(Optional) SET ETHPORT(Optional) NodeB SET HSDPAFLOWCTRLPARA(Optio nal) SET LR(Optional) SET SCRAM(Optional)
PN
PN
PN
PN
MBS
PORT
Destination Port
NodeB
ADD FTPSCLTDPORT(Mandatory)
MCPPP
MCR
MCR
NodeB
MINLNK
MPDAAT
MLPPP Packets Discard Alarm Appear Threshold Private Key File Name
PrivKey
PS
RRU Position
PSP
Power Supply Port Of ALD(Antenna NodeB SET ALDPWRSW(Mandatory) Line Device) System
PST
power type
PT
Port Type
PTYPE
Power Type
PubCert
MPDADT
PWD
PWD
Password
PWRMGN
Power Margin
PWRMODE
PWRSW
RADIUS
RCN
MPGRPN
NodeB
ADD REMOTECELLGRP(Mandatory)
MRU
NodeB
RETTP
RET Type
RFDS
RF Desensitivity
RGOPTYPE
Operation Type
NodeB
RM
Rollback Mode
RMTCGRPID
RMTCM
RN
RRU Name
MUXCP
PPP MuxCP
NodeB
RootCert
RRUMODE
RRU Mode
RS
RSCALLOCM
NEXTHOP
NEXTHOPIP
Next Hop IP
RSCLMSW
RSTMODE
Reset Mode
NO
Tscross No.
NO
PVC No.
RT
RRU Type
NODEBIP
NodeB IP Address
RTWPINITADJ
NT
RULE
NT
Node Type
RXID
Rx Index
RxNo
Rx Unit No.
RXSW
Rx Unit Switch.
PATHCHK
Path Check
PATHID
IP Path ID
PATHID
AAL2 Path ID
PCR
SBS
Subboard Status
SBT
Subboard Type
SBT
Subboard Type
ADD LNKSRC(Mandatory) ADD DEVIP(Mandatory) ADD PPPLNK(Mandatory) ADD AAL2PATH(Mandatory) ADD FRAATM(Mandatory) ADD IMAGRP(Mandatory) ADD IMALNK(Mandatory) ADD IP2RSCGRP(Mandatory) ADD IPPATH(Mandatory) ADD IPRT(Mandatory) NodeB ADD MPGRP(Mandatory) ADD MPLNK(Mandatory) ADD OMCH(Mandatory) ADD RSCGRP(Mandatory) ADD SAALLNK(Mandatory) ADD UNILNK(Mandatory) ADD CFMMEP(Mandatory) ADD ETHTRK(Mandatory) ADD ETHTRKLNK(Mandatory) ADD BACKE1T1(Mandatory)
SBT
Subboard Type
SBT
Subboard Type
SCCHPWR
HS-SCCH Power
PCR
NodeB
PEERIP
Peer IP Address
PEERPORT
PFC
NodeB
PPPLNKN
NodeB
PREF
Route Preference
SD
Start Date
SDAY
Start date
SDSEV
SDSTML
PWD
Password
NodeB
SECN
Sector No.
ADD SEC(Mandatory) NodeB ADD LOCELL(Mandatory) ADD TXPAIR(Manaatory) NodeB SET ANTTILT(Mandatory) SET TILTAER(Mandatory)
SECN
Sector No.
RCR
SECT
Sector Type
NodeB
E-HICH HPC Mode SEHICHPCMO for Service Radio NodeB SET MACEPARA(Mandatory) D Links Set
E-HICH HPC SEHICHPCPA Parameters for NodeB SET MACEPARA(Optional) RA Service Radio Links Set SEHICHPOW ER E-HICH Power for Service Radio Links NodeB SET MACEPARA(Mandatory) Set
SEHICHPWR OFFSET
E-RGCH HPC SERGCHPCP Parameters for NodeB SET MACEPARA(Optional) ARA Service Radio Links Set E-RGCH Power for SERGCHPOW Service Radio Links NodeB SET MACEPARA(Mandatory) ER Set
E-RGCH Power SERGCHPWR Offset for Service OFFSET Radio Links Set
SERIAL
Serial No.
SERIALNUM
SERVERIP
NodeB
ADD FTPSCLTDPORT(Mandatory)
SFACHID
SHLDFLG
Shield Flag
RESTARTTM R
RestartTimer(ms)
NodeB
RNCIP
RNC IP Address
SM
SM
SMONTH
Start month
SN
Slot No.
SET RTWPINITADJ(Mandatory) SET TXSW(Mandatory) SET IFOFFSET(Mandatory) SET RXATTEN(Mandatory) SET RFDESPARAM(Mandatory) SET VSWRALMPARAM(Mandatory) SET RXSW(Optional) NodeB ADD OBJALMSHLD(Mandatory) ADD RRU(Mandatory) SET OUTPORT(Mandatory) SET SUBBRD(Mandatory) ADD BRD(Mandatory) SET CLKMODE(Optional) SET ALMPORT(Mandatory) SET RXINTDETSW(Optional)
SN
Slot No.
ADD LNKSRC(Mandatory) ADD DEVIP(Mandatory) ADD PPPLNK(Mandatory) ADD AAL2PATH(Mandatory) ADD FRAATM(Mandatory) ADD IMAGRP(Mandatory) ADD IMALNK(Mandatory) ADD IP2RSCGRP(Mandatory) ADD IPCLKLNK(Mandatory) ADD IPPATH(Mandatory) ADD IPRT(Mandatory) ADD MPGRP(Mandatory) NodeB ADD MPLNK(Mandatory) ADD OMCH(Mandatory) ADD RSCGRP(Mandatory) ADD SAALLNK(Mandatory) ADD SCTPLNK(Mandatory) ADD UNILNK(Mandatory) ADD CFMMA(Mandatory) ADD CFMMEP(Mandatory) ADD BFDSESSION(Mandatory) ADD ETHTRK(Mandatory) ADD ETHTRKLNK(Mandatory) ADD BACKE1T1(Mandatory)
SN
Slot No.
SET E1T1BEAR(Mandatory) SET E1T1LOP(Mandatory) SET E1T1WORKMODE(Mandatory) SET ETHPORT(Mandatory) SET HSDPAFLOWCTRLPARA(Mand atory) NodeB SET IPREMOTELOOP(Mandatory) SET LR(Mandatory) SET SCRAM(Mandatory) SET STM1WORKMODE(Mandatory) SET STM1LOP(Mandatory) SET SDHJ0J1J2(Mandatory)
SN1
SN2
SNB
Slot No. of RRU Begin Slot No. of RRU End Slot No. of DL Process Unit 1 Slot No. of UL Process Unit 1 Slot No. of DL Process Unit 2 Slot No. of UL Process Unit 2 Slot No. of DL Process Unit 3 Slot No. of UL Process Unit 3 Slot No. of DL Process Unit 4 Slot No. of UL Process Unit 4
SNE
ADD SEC(Optional) NodeB ADD LOCELL(Optional) ADD TXPAIR(Optional) ADD SEC(Optional) NodeB ADD LOCELL(Optional) ADD TXPAIR(Optional) NodeB ADD DLGROUP(Mandatory)
SNE1
SNE1
SNE2
SNE2
SNE3
SNE3
SNE4
SNE4
SOLL
SOLL
SOUL
SOUL
SP
Sync Period(Minute)
RSCGRPID
ADD AAL2PATH(Optional) ADD IP2RSCGRP(Optional) Resource Group ID NodeB ADD IPPATH(Optional) ADD RSCGRP(Optional) ADD SAALLNK(Optional)
SPR
Speed Rate
SRCPN
SRCPN
SRCPN
SRCPT
RSW
SRCSBT
NodeB
SRCSBT
NodeB
SRCSN
SRCSN
SRCSRN
RTTYPE
Route Type
RU
Rate Unit
ADD AAL2PATH ADD SAALLNK NodeB ADD TREELNKPVC ADD RSCGRP ADD OMCH
RXBW
Rx Bandwidth(kbps)
SRN
Subrack No.
ADD SUBRACK(Mandatory) SET SASUVSWRTHD(Mandatory) SET RTWPINITADJ(Mandatory) SET TXSW(Mandatory) SET IFOFFSET(Mandatory) SET RXATTEN(Mandatory) SET RFDESPARAM(Mandatory) SET VSWRALMPARAM(Mandatory) SET RXSW(Mandatory) SET HTPROTECT(Mandatory) SET BCFCVOLTAGE(Mandatory) ADD OBJALMSHLD(Mandatory) SET TMAGAIN(Mandatory) ADD RRU(Mandatory) NodeB SET ACDCVLIMIT(Mandatory) SET BATATPA(Mandatory) SET BATCTPA(Mandatory) SET HTCDPA(Mandatory) SET OUTPORT(Mandatory) SET PWRSYSCFG(Mandatory) SET TATH(Mandatory) SET SUBBRD(Mandatory) SET TILTAER(Mandatory) SET SASUDCLD(Mandatory) SET SASUDCSW(Mandatory) SET SASUGAIN(Mandatory) SET SASUMODE(Mandatory) SET ANTTILT(Mandatory) ADD NPSU(Mandatory) SET HTPA(Mandatory) SET SDPA(Mandatory)
SRN
Subrack No.
ADD LNKSRC(Mandatory) ADD DEVIP(Mandatory) ADD PPPLNK(Mandatory) ADD AAL2PATH(Mandatory) ADD FRAATM(Mandatory) ADD IMAGRP(Mandatory) ADD IMALNK(Mandatory) ADD IP2RSCGRP(Mandatory) ADD IPCLKLNK(Mandatory) ADD IPPATH(Mandatory) ADD IPRT(Mandatory) ADD MPGRP(Mandatory) NodeB ADD MPLNK(Mandatory) ADD OMCH(Mandatory) ADD RSCGRP(Mandatory) ADD SAALLNK(Mandatory) ADD SCTPLNK(Mandatory) ADD TSCROSS(Mandatory) ADD UNILNK(Mandatory) ADD CFMMA(Mandatory) ADD CFMMEP(Mandatory) ADD BFDSESSION(Mandatory) ADD ETHTRK(Mandatory) ADD ETHTRKLNK(Mandatory) ADD BACKE1T1(Mandatory)
SRN
Subrack No.
SET E1T1BEAR(Mandatory) SET E1T1LOP(Mandatory) SET E1T1WORKMODE(Mandatory) SET ETHPORT(Mandatory) SET HSDPAFLOWCTRLPARA(Mand atory) NodeB SET IPREMOTELOOP(Mandatory) SET LR(Mandatory) SET SCRAM(Mandatory) SET STM1WORKMODE(Mandatory) SET STM1LOP(Mandatory) SET SDHJ0J1J2(Mandatory)
SRN1
SRN2
SRNB
Subrack No. of RRU Begin Subrack No. of RRU End Subrack No. of DL Process Unit 1 Subrack No. of UL Process Unit 1 Subrack No. of DL Process Unit 2 Subrack No. of UL Process Unit 2 Subrack No. of DL Process Unit 3 Subrack No. of UL Process Unit 3 Subrack No. of DL Process Unit 4 Subrack No. of UL Process Unit 4
SRNE
ADD SEC(Mandatory) NodeB ADD LOCELL(Mandatory) ADD TXPAIR(Mandatory) ADD SEC(Mandatory) NodeB ADD LOCELL(Mandatory) ADD TXPAIR(Mandatory) NodeB ADD DLGROUP(Optional)
SRNE1
SRNE1
SRNE2
SRNE2
SRNE3
SRNE3
SRNE4
SRNE4
SRT
Subrack Type
RXT
Expected Rx Type
RXV
Expected Rx Information
RXVER
SAALNO
SCR
ST
Start time
ST
Start Time
SCR
STN
Site No.
STN
Site No.
NodeB
STNAME
Site Name
SCRAM
Scramble Mode
SCTPNO
SUBUNIT
Subunit No.
SW
SECLOCIP
SWEEK
Start week
SECPEERIP
SWITCH
NodeB
SWITCH
NodeB
SWSEQ
SIP
Server IP Address
TCC
TCN
SRCRSCGRP
TDSTM
TILT
TILT1
TILT2
SRCTSN
SRCVCI
SRCVPI
TLL
TLT
Tout Limit
TM
Time
TO
TP
TPN
ST
Service Type
ST
STM1N
STM1 No.
TSN
TSRN
TT
Topo Type
TUL
SW
Tx Switch
TB
Trace Byte
TIMER
Timer(ms)
TS16
NodeB
TxNo
Tx Unit No.
TXSW
Tx Unit Switch
TSN
TXBW
TX Bandwidth(kbps)
TXBW
TYPE
Sensor Type
UCTHD
UL
Upper Limit
UL
ULDELAY1
UL Time Delay1
ULDELAY2
UL Time Delay2
ULDELAY3
UL Time Delay3
ULDELAY4
UL Time Delay4
ULFREQ
ULGROUPN
ULGROUPNO
TXCBS
TXEBS
Tx EBS(bit)
UOTHD
UPPERLIMIT
USR
TXT
Tx Type
TXV
Tx Information
VENDOR
Vendor Code
TXVER
UN
User Name
NodeB
UNILNKN
VCI
Bearing VCI
NodeB
VER
VLANID
VLAN ID
VLANMODE
VLAN Mode
VLANPRIO
VLAN Priority
VPI
Bearing VPI
NodeB
VST
VT
RRU Vertical
WM
Work Mode
ZONET
Time zone
SD
CM
Check mode
IQDL
IQ Data Length
PSP
PCT
PD
THR
Interfere threshold
NMCA
Unit No.
INCA1
Carrier Index 1
INCH1
Unit Index 1
INCA2
Carrier Index 2
INCH2
Unit Index 2
INCA3
Carrier Index 3
INCH3
Unit Index 3
INCA4
Carrier Index 4
INCH4
Unit Index 4
INCA5
Carrier Index 5
INCH5
Unit Index 5
INCA6
Carrier Index 6
INCH6
Unit Index 6
INCA7
Carrier Index 7
INCH7
Unit Index 7
INCA8
Carrier Index 8
INCH8
Unit Index 8
RU
Rate Unit
ADD SAALLNK(Mandatory) ADD AAL2PATH(Mandatory) NodeB ADD TREELNKPVC(Mandatory) ADD OMCH(Mandatory) ADD RSCGRP(Mandatory)
ICPT
DM
Domain
BELONG
Belong Flag
NodeB
NAME
MD name
LEVEL
MD level
NodeB ADD CFMMD(Optional) ADD CFMMA(Mandatory) ADD CFMMEP(Mandatory) NodeB ADD CFMRMEP(Mandatory) ADD CFMBNDIP(Mandatory) ADD CFMMA(Mandatory) ADD CFMMEP(Mandatory) NodeB ADD CFMRMEP(Mandatory) ADD CFMBNDIP(Mandatory) NodeB ADD CFMMA(Mandatory)
MDNAME
MD Name
MANAME
MA Name
VLANID
VLAN ID
MEPID
MEP ID
RMEPID
RMEP ID
MAC
BNDIP
RMEP IP Addr
PT
Port Type
PN
Port No.
BFDSN
SRCIP
DESTIP
HT
MINTI
Min Tx Interval
MINRI
Min Rx Interval
DM
Detect Mult
TN
TrunkNo.
NodeB
LACP
Lacp Switch
ARPPROXY
ArpProxy
FERAT
Frame Error Rate AppearThreshold of NodeB ADD ETHTRK(Optional) FE MAC Layer Frame Error Rate DisappearThreshol NodeB ADD ETHTRK(Optional) d of FE MAC Layer Port No. NodeB ADD CFMMEP(Optional) ADD ETHTRKLNK(Optional)
FERDT
PN
Max HARQ Retransmission MAXNONCON Times of NonVERHARQRT Conversational serive in Cell DCH state
EFACH HS-SCCH HSSCCHPWR Power Control NodeB SET MACHSPARA(Optional) CMINEFACH Method
CQI Adjust CQIADJALGO Algorithm Switch of NodeB SET MACHSPARA(Optional) FCON Conversational Service
CQI Adjust CQIADJALGO Algorithm Switch of NodeB SET MACHSPARA(Optional) FNONCON non-Conversational Service
HSUPA CE HSUPACESC SCHEDULING HSWITCH SWITCH HSUPA HSUPAOLSC OVERLOAD HSWITCH SCHEDULING SWITCH SLOCELL
DLOCELL
MAXSHRTO
Max Sharing Power NodeB ADD PAGRP(Optional) Ratio Sharing Power Margin R99 Flow Control Function Switch Dl BB Resource Allocation Mode BB Resource Pool Type Itel Shutdown Switch NodeB ADD PAGRP(Optional) SET NodeB R99FLOWCTRLSWICH(Mandato ry) NodeB ADD LOCELL(Optional)
SHMGN
SWITCH
DLRESMODE
BBPOOLTYPE
ISD
SD
CM
Check mode
IQDL
IQ Data Length
PSP
PCT
PD
THR
Interfere threshold
NMCA
Unit No.
INCA1
Carrier Index 1
INCH1
Unit Index 1
INCA2
Carrier Index 2
INCH2
Unit Index 2
INCA3
Carrier Index 3
INCH3
Unit Index 3
INCA4
Carrier Index 4
INCH4
Unit Index 4
INCA5
Carrier Index 5
INCH5
Unit Index 5
INCA6
Carrier Index 6
INCH6
Unit Index 6
INCA7
Carrier Index 7
INCH7
Unit Index 7
INCA8
Carrier Index 8
INCH8
Unit Index 8
PT
PT
Port Type
NodeB
PT
PT
Port Type
PT
Port Type
PT
IMAGRPSBT
IPDAAT
IPDAAT
MPGRPSBT
E1T1SRN
E1T1SN
E1T1SBT
E1T1PN
HWNO
FCS
Frame CRC
RMEPID
RMEP ID
NodeB ADD CFMRMEP(Mandatory) SET STM1WORKMODE(Mandatory) NodeB SET STM1LOP(Mandatory) SET SDHJ0J1J2(Mandatory)
SBT
Subboard Type
OAM3AHSW
3ah Switch
PTPPRI
PTP Priority
CLEAR
Clear Statistic
CNT
NodeB
SZ
TMOUT
Timeout(s)
NodeB
INTVL
Interval(s)
NodeB
PT
Port Type
PTYPE
Description
Value Type
Upper limit ratio of the power for the user with 128 kbps GBR to the Interval Type total power of the cell Upper limit ratio of the power for the user with 16 kbps GBR to the total power of the cell
1~100
1~100
Interval Type
1~100
1~100
16QAM Switch
Enumeration Type
OPEN, CLOSE
OPEN, CLOSE
None
Upper limit ratio of the power for the user with 256 kbps GBR to the Interval Type total power of the cell Upper limit ratio of the power for the user with 32 kbps GBR to the total power of the cell
1~100
1~100
Interval Type
1~100
1~100
Upper limit ratio of the power for the user with 384 kbps GBR to the Interval Type total power of the cell Upper limit ratio of the power for the user with 64 kbps GBR to the total power of the cell Upper limit ratio of the power for the user with 8 kbps GBR to the total power of the cell
1~100
1~100
Interval Type
1~100
1~100
Interval Type
1~100
1~100
ARP Proxy
Enumeration Type
Enumeration Type
None
Interval Type
60~300
60~300
AC Lower Limit of the NPMU AC/DC Voltage Alarm Threshold Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link.
Interval Type
60~300
60~300
Enumeration Type
ATM, IPV4
ATM, IPV4
None
BootpTime. The Bootp Time starts Interval Type when the OMCH is abnormal.
15~70000000
15~70000000
min
Interval Type
0~10
0.1~1, Step:0.1
degre e
AG Threshold. If the UE-expected authorized value is equal to or great than the active authorized value plus this threshold value, Interval Type authorize the UE through the AG channel. Otherwise, authorize the UE through RG channel; It may affect the rate of HSUPA.
0~31
0~31
None
Alarm ID
Interval Type
1~32000
1~32000
None
Enumeration Type
Alarm ID
Interval Type
65334~65535
65334~65537
None
Binding Route. When the remote maintenance IP address and local maintenance IP address are in different network segments, the binding route should be set. It indicates whether to bind a route.
Enumeration Type
None
Cabinet No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
MASTER
None
It is the No. of the first antenna connector; There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A, R0B
None
Enumeration Type
ANTA(No.A Ant of Power Amplifier), ANTA, ANTB ANTB(No.B Ant of Power Amplifier)
None
Subrack No. of Antenna Channel1: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna Interval Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
20~254
20~254
None
Cabinet No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
MASTER
None
It is the No. of the second antenna connector; There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A, R0B
None
ANTA(No.A Ant of Power Amplifier), ANTA, ANTB ANTB(No.B Ant of Power Amplifier)
None
Subrack No. of Antenna Channel2: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna Interval Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
20~254
20~254
None
Cabinet No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
MASTER
None
It is the No. of the third antenna connector; There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A, R0B
None
Subrack No. of Antenna Channel3: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna Interval Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
20~254
20~254
None
Cabinet No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
MASTER(Master cabinet)
MASTER
None
It is the No. of the fourth antenna connector; There are one or more antenna channels in one sector. The number of the channels equals Enumeration antenna magnitude. The antenna Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
R0A, R0B
None
Subrack No. of Antenna Channel4: There are one or more antenna channels in one sector. The number of the channels equals antenna magnitude. The antenna Interval Type channels are identified by antenna connectors at the cabinet top, hereinafter referred to as "antenna connector".
20~254
20~254
None
It refers to the magnitude of antennas in the sector. Do not use Enumeration it when Sector Type is Distributed Type Sector.
1, 2, 4
None
BER Threshold
Enumeration Type
1E-3(E1/T1 high bit error rate threshold 1E-3), 1E-4(E1/T1 high bit error rate threshold 1E-4), 1E-3, 1E-4, 1E-5, 1E-5(E1/T1 high bit 1E-6 error rate threshold 1E-5), 1E-6(E1/T1 high bit error rate threshold 1E-6)
None
Enumeration Type
Enumeration Type
Enumeration Type
TMA12DB_ONLY_ NON_AISG (Only TMA 12dB (NON_AISG)), TMA24DB_ONLY_ NON_AISG (Only TMA 24dB (NON_AISG)), RET_ONLY_COAX IAL (Only RET (COAXIAL)), RET_ONLY_MULT ICORE (Only RET (MULTICORE)), TMA12DB_AISG (12dB TMA and RET or Only TMA 12dB (AISG)), TMA24DB_AISG (24dB TMA and RET or Only TMA 24dB (AISG)), CUSTOM (Custom) WATER (water immersion), SMOKING (smoking), INFRARED (infrared), GATING (door control) PERIOD (Period Auto Test), POWERCUT (Power Cut Auto Test), PERIODPOWERC UT (Period and Power Cut Auto Test), NOAUTOTEST (No Auto Test)
None
Interval Type
0, 4~22
0, 4~22
dB
Timer_CC, which indicates the length of the SSCOP timer Timer_CC specified in the SAALrelated protocol.
Interval Type
100~65535
100~65535
ms
Enumeration Type
None, PEER
None
Enumeration Type
ON, OFF
ON, OFF
None
Clock Mode. If this parameter is not specified, the original value is kept.
Enumeration Type
None
Enumeration Type
HIGH (High), LOW HIGH, LOW (Low) HIGH (Alarms at high impedance), LOW (Alarms at low impedance)
None
Alarm Voltage
Enumeration Type
HIGH, LOW
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Frequency Band
Enumeration Type
No, Yes
No, Yes
None
Base station ID
String Type
None
A string of up to 12 bytes
None
Base station ID
String Type
None
A string of up to 32 bytes
None
Battery Capacity
Interval Type
5~600
5~600
Ah
Boost-Charging Duration
Interval Type
30~240
30~240
day
Battery Current Limiting Coefficient Any Type Enumeration Type Interval Type
0.05~0.25
0.05~0.25
None
INNER, OUTER
INNER, OUTER
None Celsi us
40~79
40~79
-19~5
-19~5
Celsi us
Any Type
43.2~57.6
Beamwidth
Range Type
0~255
0~255
deg
Beamwidth
Range Type
0~255
0~255
deg
Beamwidth
Range Type
0~255
0~255
deg
Beamwidth
Range Type
0~65535
0~65535
deg
Beamwidth
Range Type
0~65535
0~65535
deg
Beamwidth
Range Type
0~65535
0~65535
deg
Beamwidth
Range Type
0~65535
0~65535
deg
Discard Rate. The link is not congested when the frame loss ratio is lower than or equal to this threshold.
Interval Type
0~1000
None
Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address IP Address Type 0.0.0.0). The IP & mask must be equal to this IP address. The mask in binary does not allow "0" before "1", or "1" after "0".
Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to IP Address Type this IP address. The mask in binary does not allow "0" before "1", or "1" after "0".
Interval Type
0~155000
0~155000
kbit
Antenna Bearing
Range Type
0~65535
0~65535
None
None
Enumeration Type
COLD, HOT
COLD, HOT
None
Interval Type
0 None
Enable Switch
Enumeration Type
Interval Type
0~8
0~8
None
Second Break Point Position of the RRU Chain/Ring (For Ring Topology Only) If it is not specified, Interval Type it equals to the value of the first break point position.
0~8
0~8
None
Enable Switch
Enumeration Type
Enumeration Type
Any Type
35.0~55.6
0~100
None
Enumeration Type
NEMU (NE Environment Monitoring Unit), NFAN (NodeB FAN Box), WMPT (WCDMA Main Processing & Transmission unit), UTRP (Universal extension TRansmission Processing unit), WBBPa (WCDMA BaseBand Process unit type A), WBBPb (WCDMA BaseBand Process unit type B), UPEA (Universal Power and environment Interface Unit A), UPEB (Universal Power and environment Interface Unit B), UEIU (Universal environment Interface Unit).
None
Enumeration Type
None
Interval Type
40~70
40~70
degre e
Interval Type
None
Enumeration Type
REGULAR (Regular Installation Scenario: One RET antenna connects to one antenna connector for signal transmission), SECTOR_SPLITTI NG (Sector Splitting Scenario: A number of RET antennas transmit signals to cover one cell in which the single sector is logically divided into multiple subsectors), DAISY_CHAIN (Antenna Cascaded Scenario: A number of RET antennas are sequentially connected to a single cable), 2G_EXTENSION (2G Extension Scenario: Control the RET antennas of 2G networks by 0~100
Frame Error Rate DisappearThreshold of FE MAC Layer Enabled State of the SSL Certificate Chain
Interval Type
None
Enumeration Type
DISABLE(Disable), Disable, Enable ENABLE(Enable) MASTER(Master Channel), SLAVE(Slave Channel) DISABLE(Disable FP multiplexing), ENABLE(Enable FP multiplexing)
None
A flag, which indicates whether the Enumeration OM channel is the master one or Type the slave one. FPMUX Switch, which is a switch to enable or disable FP multiplexing. Enumeration Type
MASTER, SLAVE
None
None
A string of up to 64 characters
None
Fault Handling Mode for Failure in Enumeration Running the Batch Command Files Type
BEST_EFFORT (Best effort), BEST_EFFORT, BREAK_ON_FAIL BREAK_ON_FAILU None URE (Break on RE failure)
Compress Flag
Enumeration Type
None
0~1
0~1
None
ON, OFF
ON, OFF
None
CHR Type
Enumeration Type
None
Interval Type
5~600
5~600
None
None
Frame Max Length, which indicates the maximum length of Interval Type the FP, without the IP/UDP header after multiplexing.
100~1031
100~1031
byte
Timer_Idle. Length of the SSCOP timer Timer_Idle specified in the SAAL-related protocol. The value of this parameter should be larger than or equal to the value of KATM.
Interval Type
100~65535
100~65535
ms
Interface Number
Interval Type
0~15
0~15
None
Interface Type
Enumeration Type
PPP, MPGRP
None
E1 or T1 line Impendance
Enumeration Type
75(the line workmode is E1), 120(the line workmode is E1), 100(the line workmode is T1)
ohm
Enumeration Type
GPSCARD (GPS card clock source), LINE(LINE clock GPSCARD, LINE, source), IPCLK(IP IPCLK, PTP, PEER clock source), PTP(PTP clock source), PEER
None
Enumeration Type
Cabinet No.
Enumeration Type
MASTER(Master cabinet)
MASTER
None
Cabinet No. of Power Enumeration Amplifier1:Power Amplifier refers to Type the power amplify unit in RRU.
MASTER(Master cabinet)
MASTER
None
Cabinet No. of Power Enumeration Amplifier2:Power Amplifier refers to Type the power amplify unit in RRU.
MASTER(Master cabinet)
MASTER
None
Enumeration Type
MASTER(Master cabinet)
MASTER
None
Enumeration Type
MASTER(Master cabinet)
MASTER
None
Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type Interval Type
MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) MASTER(Master cabinet) 0~65535
MASTER
None
MASTER
None
MASTER
None
MASTER
None
Cabinet No. of DL Process Unit 3 Cabinet No. of UL Process Unit 3 Cabinet No. of DL Process Unit 4 Cabinet No. of UL Process Unit 4 Operator Index
None
None
Statistic Count
Interval Type
0~65535
0~65535
None
Enumeration Type
SAMEZONE (Same Cover SAMEZONE, Type), DIFFZONE DIFFZONE (Different Cover Type)
None
IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP IP Address Type & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.
Local IP Address. The local IP address cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x IP Address Type or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask.
Interval Type
0~99
0~99
None
String Type
None
A string of up to 64 characters
None
Enumeration Type
DISABLE(Disable), Disable, Enable ENABLE(Enable) CONFIGED (Configed), NOTCONFIGED (Not Configed) ENABLE, DISABLE
None
State Indicating Whether the RRU is Connected to an Auxiliary Power Enumeration System Type State Indicating Whether the CMU is configured Cold Start Load Shutdown Flag of the NEMU Enumeration Type
CONFIGED, NOTCONFIGED
None
Interval Type
-40~0
-40~0
degre e
ON, OFF
None
255~65520
None
DA
Interval Type
255~65520
255~65520
None
Installation Date
Interval Type
1~31
1~31
None
Start Time
Compound Type
Format: YYYY&MM&DD
Format: YYYY&MM&DD
None
Lasting days
Interval Type
0~65535
0~65535
None
Interval Type
0~30
0~30
Celsi us
Destination Cell ID
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
Interval Type
0~65535
0~65535
None
SASU DC Load
Interval Type
0~65535
0~65535*0.2, Step:0.2
mA
Enumeration Type
None
Any Type
58.0~60.0
Any Type
35.0 ~ 55.6
Interval Type
1~60
1~60
Interval Type
10~100
10~100
Enumeration Type
DISABLE(Not Join in Transmission Resource Group), DISABLE, ENABLE None ENABLE(Not Join in Transmission Resource Group)
Timer_Keep_Alive. Length of the SSCOP timer Timer_Keep_Alive specified in the SAAL-related protocol.
Interval Type
100~65534
100~65534
ms
Device Type
Enumeration Type
SINGLE_RET (Single-antenna Remote Electrical Tilt), STMA (Smart Tower-mounted SINGLE_RET, Amplifier), STMA, None MULTI_RET (MultiMULTI_RET, SASU antenna Remote Electrical Tilt), SASU (Same band Antenna Sharing Unit) SINGLE_RET (Single-antenna Remote Electrical Tilt), STMA (Smart Tower-mounted SINGLE_RET, Amplifier), STMA, None MULTI_RET (MultiMULTI_RET, SASU antenna Remote Electrical Tilt), SASU (Same band Antenna Sharing Unit) SINGLE_RET (Single-antenna Remote Electrical Tilt), MULTI_RET (Multi-antenna Remote Electrical Tilt)
Device Type
Enumeration Type
Enumeration Type
SINGLE_RET, MULTI_RET
None
None
Destination FACH Channel ID The First Destination FACH Channel ID The Second Destination FACH Channel ID
0~255
0~255
None
Interval Type
0~255
0~255
None
Interval Type
0~255
0~255
None
Local IP Address. The local IP address can be 0.0.0.0. If the local IP address is not 0.0.0.0, it should IP Address Type belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x.
To match the uplink coverage capability with the downlink coverage capability, desensitization is applied to reduce the sensitivity of the receiver Interval Type manually by adding proper noise to received signals; if the desensitization intensity is set to 0, the desensitization is not applied.
0~30
dB
Enumeration Type
None
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~65535
0~65535
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Local IP Address. The local IP address should belong to legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The parameter cannot IP Address Type be equal to the other SCTP link IP address. The parameter must be the active interface address of this board. 0.05C10 Discharge Time Any Type -
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
Any Type
0.01~50.01
0.01~50.03
None
IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot IP Address Type be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0". Daylight Saving Time Flag (If it is Enumeration not specified, the DST settings do Type no change.) Valid absolute path of the destination on FTP SERVER, not including the file name
YES, NO
None
String Type
None
Local IP Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot IP Address Type be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0". Max Connection Control Count, which indicates the maximum number of connections or releases Interval Type specified in SAAL-related protocol, that is the maximum permitted number of retransmissions Max STAT Count, which indicates the maximum number of list elements in STAT PDU specified in Interval Type SAAL-related protocol. It must be an odd number. Max Poll Data Count, which indicates the maximum number of Interval Type times of polling data transmissions specified in SAAL-related protocol. Discharge Test Time Limit of the Battery Capacity Test Interval Type
1~255
None
3~65535
3~65535
None
1~65535
1~65535
None
1~100
1~100
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Enumeration Type
IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM) The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
Interval Type
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
Enumeration Type
None
Enumeration Type
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0 None
Bearing Mode
Enumeration Type
ATM, IPV4
ATM, IPV4
None
Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.
IP Address Type -
Timer_No_Response. Length of the SSCOP timer timer Timer_No_Response specified in the SAAL-related protocolIt.
Interval Type
101~65535
101~65535
ms
Refers to OM priority
Interval Type
0~63
0~63
None
Enumeration Type
OPEN, CLOSE
OPEN, CLOSE
None
Enumeration Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or FDPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or FDPCH), CQI_BASED (Dynamic transmit power control based on CQI), HSSCCH_BASED (Dynamic transmit power control based on HSSCCH) NO, YES
None
Whether to set the E-AGCH power Enumeration control parameters or not Type This parameter specifies the power offset of the E-AGCH from the Interval Type power of the Common Pilot Channel. E-AGCH Power Offset; An offset is added to the power of the current 2 ms sub-frame based on the TPC field power of its corresponding Interval Type DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
NO, YES
None
-350~150
0~255
Interval Type
The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
Interval Type
1~31
1~31
None
Interval Type
80~100 EFFICIENT~0(Effic ient) UNEFFICIENT~1( Not Efficient) DATE, WEEK, DATEWEEK JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
80~100
Effect Signal
Enumeration Type
Enumeration Type
Enumeration Type
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None
Enumeration Type
None
Interval Type
1.70~2.20
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, IP Address Type the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. Peer IP Mask. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. IP Address Type Note that "~mask" indicates the complement on the mask. The mask in binary allows no "0" before "1" or "1" after "0".
None
None
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), SUN, MON, TUE, WED(Wednesday), WED, THU, FRI, THU(Thursday), SAT FRI(Friday), SAT(Saturday) FIRST(First), SECOND(Second), FIRST, SECOND, THIRD(Third), THIRD, FOURTH, FOURTH(Fourth), LAST LAST(Last)
None
Enumeration Type
None
Any Type
43.2~57.6
Peer UDP Port is one of the parameters between NodeB and RNC.
Interval Type
1024~3584
1024~3584
None
Interval Type
0~100
None
Packet Loss Rate Disappearing Threshold, and its value shall not be larger than the PLRAT value.
Interval Type
0~100
None
Timer_Poll. Length of the SSCOP timer Timer_Poll specified in the SAAL-related protocol. Download Configuration File Enable Flag
Interval Type
100~65534
100~65534
ms
Enumeration Type
Enumeration Type
ENABLE, DISABLE
Interval Type
-100~1000
-100~1000
None
Route Preference
Interval Type
1~255
1~255
None
Priority Rule, according to the Enumeration precedence in the TOS field or the Type DSCP field
IPPRECEDENCE( According to the precedence value IPPRECEDENCE, in the TOS field), DSCP DSCP(According to the DSCP value in the TOS field)
None
Resource Group ID
Interval Type
0~3
0~3
None
Enumeration Type
None
Interval Type
32~15800
32~15800
kbit/s
Interval Type
The value range is 30~6759 when rate unit is kbps; The value range is 71~15942 when rate unit is cell per second; The value range is 30~6759 when rate unit is kbps; The value range is 71~15942 when rate unit is cell per second;
The value range is 30~6759 when rate unit is kbps; kbps The value range is or 71~15942 when rate cell/s unit is cell per second; The value range is 30~6759 when rate unit is kbps; kbps The value range is or 71~15942 when rate cell/s unit is cell per second;
Interval Type
Signaling priority. IPPRECEDENCE: 0 (lowest) and 7 (highest) DSCP: 000000 (for default PHB) and XXX000 (for Class-Selector PHB), where X is 0 or 1. The service level is consistent with Interval Type the IP Precedence in the existing network. For Expedited Forwarding PHB, DSCP is 101110. For Assured Forwarding PHB, four service levels (bandwidth and buffer size) and three packet discard priorities are listed here.
0~63
0~63
None
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is Enumeration RTVBR or NRTVBR, both PCR Type and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real CBR, RTVBR, Time Variable Bit NRTVBR, UBR, Rate), UBR+ UBR(Unspecified Bit Rate), UBR_PLUS(Unspe cified Bit Rate+)
None
TMA Gain
Interval Type
0~255
0~255*0.5, Step:0.5 dB
Antenna Gain
Range Type
0~255
0~25.5, Step:0.1
dB
Antenna Gain
Range Type
0~255
0~25.5, Step:0.1
dB
Antenna Gain
Range Type
0~255
0~25.5, Step:0.1
dB
Antenna Gain
Range Type
0~255
0~25.5, Step:0.1
dB
Interval Type
0~1000
0~1000
None
MASTER
None
FALSE, TRUE
None
Enumeration Type
FALSE, TRUE
None
Interval Type
5.00~95.00
5.00~95.00
Interval Type
0~200000
0~200000
Interval Type
0~5
None
Slot Number of the Head Interface Interval Type Board Number of the Head Subrack Interval Type
2~3
None
0 None
High Temperature Critical Point of the NCMU Heat Control Delta Parameter
Interval Type
-99~70
-99~70
Celsi us
Interval Type
-99~40
-99~40
Celsi us
High Temperature at the Delta Air Outlet of the NCMU Heat Control Delta Parameter
Interval Type
0~30
0~30
Celsi us
Interval Type
-99~40
-99~40
Celsi us
Interval Type
5.00~95.00
5.00~95.00
Interval Type
0~1000
0~1000
None
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is Enumeration RTVBR or NRTVBR, both PCR Type and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real CBR, RTVBR, Time Variable Bit NRTVBR, UBR+, Rate), UBR UBR_PLUS(Unspe cified Bit Rate+), UBR(Unspecified Bit Rate)
None
Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP Interval Type can be multiplexed only when its frame length is smaller than this value.
1~1023
1~1023
byte
Enumeration Type
Enumeration Type
BOTTOM (Offset to bottom, that is, offset to the minimum value (The interference signal frequency is greater than or equal to the current receive frequency.)), MIDDLE (Offset to middle, that is, there is no offset (no interference).), TOP (Offset to top, that is offset to the maximum value (The interference signal frequency is smaller than the current receive frequency.)), MINUS_50M (Only 4 carrier RRU support), PLUS_50M (Only 4 carrier RRU support), MINUS_75M (Only 4 carrier RRU support), PLUS_75M (Only 4 carrier RRU support). 0~100
Time Delay. The link is not congested when the delay is lower Interval Type than this threshold. This parameter indicates the duration of Timer.
ms
Interval Type
1~20
1~20
ms
Enumeration Type
DISABL(Disabl), ENABLE(Enable)
Tx Clock
Enumeration Type
RECOVEDRX(the clock recovered from optical signals received by the RECOVEDRX, receive end), EXT8K EXT8K(external 8kHz clock transmitted from NMPT to NUTI)
None
Bearing VCI Analog Port Number of the NEMU Standby Analog Value Input Parameters Bearing VPI
Interval Type
32~511
32~511
None
Interval Type
0~3
0~3
None
Interval Type
0~255
0~255
None
Interval Type
32~155000
32~155000
kbit
Installation Date
String Type
None
A string of up to 6 bytes
None
Installer's ID
String Type
None
A string of up to 5 bytes
None
Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.
Interval Type
Committed Information Rate, which is related to a specific physical interface but lower than the physical interface rate.
Interval Type
Duplex. Interface duplex mode. The value can be forced fullduplex. If the value is null, the duplex mode is not modified.
Enumeration Type
FULL(Full-Duplex) FULL
None
Frame Structure. If this parameter is not specified, the original value is kept.
Enumeration Type
E1_DOUBLE_FRA ME (Double framtype for E1), E1_CRC4_MULTI_ FRAME (CRC4 Mutipiy framtype for E1), T1_SUPER_FRAM E (Super framtype for T1), T1_EXTENDED_S UPER_FRAME (Extended Super framtype for T1) DISABLE(Disable the LR settings on the port), ENABLE(Enable the LR settings on the port)
Function. DISABLE means disabling the LR settings on the Enumeration port. ENABLE means enabling the Type LR settings on the port.
Enumeration Type
None
This parameter indicates whether to add the VLAN tag. DISABLE means not adding the VLAN tag, and ENABLE means adding the VLAN tag.
Enumeration Type
Enumeration Type
NOLOOP (loopback mode is cancelled.), LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through E1 cables. It is used to check whether the NOLOOP, LOCAL, transmission chips REMOTE are normal..), REMOTE (Remote loopback, which means that data goes through a loop of E1 cables between NodeB and RNC. it is used to check whether the E1 cables are normal.) NOLOOP (No loop), ALL (ALL IP Address), IPADDR (Appointed IP Address), IPADDRADDUDP PORT (Appointed IP Address and UDP port No.) ENABLE, DISABLE
None
Enumeration Type
None
Enumeration Type
ENABLE, DISABLE
None
Interval Type
15~30
15~30
None
Any Type
36.00~43.00
Any Type
None
None
None
Loopback Mode
Enumeration Type
NOLOOP (loopback mode is cancelled.), REMOTE (Remote loopback, which means that data goes through a loop of fibers betweenNodeB and RNC/BSC. it is used to check whether the fibers NOLOOP, LOCAL, are normal.), REMOTE LOCAL (Local end loopback, which means that data goes through a loop within a NodeB instead of through fibers. It is used to check whether the transmission chips are normal.)
None
Line Code. If this parameter is not specified, the original value is kept.
Enumeration Type
HDB3(HDB3 code for E1), AMI(AMI HDB3, AMI code for E1or T1)
None
Line Code. If this parameter is not specified, the original value is kept.
Enumeration Type
AMI, B8ZS
None
Loopback Time
Range Type
1~60
1~60
min
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, IP Address Type the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask.
Scramble Mode
Enumeration Type
ENABLE(Scramble , it must be ENABLE, when E1/T1 adopts AMI ENABLE, DISABLE None mode), DISABLE(No scramble)
Speed mode. The value can be forced 10 Mbps, forced 100 Mbps, or auto-negotiated. It must be consistent with the peer IP Enumeration interface. If the value is null, the Type speed is not modified. Value range: 10M (Forced 10 Mbps), 100M (Forced 100 Mbps), AUTO (Auto-negotiation).
Ethernet electrical port: 10M, 100M, AUTO; Ethernet optical port: 100M
None
Interval Type
0~1
0~1
None
This parameter indicates the DSCP Interval Type priority of the user data.
0~63
0~63
None
Traffic Type, including user data, OM, SIG, and other types.
Enumeration Type
USERDATA (USERDATA), SIG (SIG DATA), OM USERDATA, SIG, (Maintenance OM, OTHER DATA), OTHER (OTHER) 0~3 0~3
None
Interval Type
None
Local Cell ID
Interval Type
0~268435455
0~268435455
None
VLAN ID
Interval Type
1~4094
1~4094
None
VLAN Priority, which indicates the Interval Type priority level of VLAN
0~7
0~7
None
Maximum number of transmission units. It is the maximum length of the IP packets on the port. If this parameter is not specified, the MTU is not modified. Minimum value of the timer for disabling the cell transmitter
Interval Type
46~1500
46~1500
None
Interval Type
0~255
0~255
min
Enumeration Type
ENABLE, DISABLE
ENABLE, DISABLE
None
35.0~55.6
35.0~55.6, precision:0.1
Enumeration Type
DISABLE, ENABLE
Low Temperature Critical Point of the NCMU Heat Control Delta Parameter
Interval Type
-99~70
-99~70
Celsi us
Interval Type
55~70
55~70
None
-40~10
-40~10
Celsi us
Enumeration Type
ON, OFF A hexadecimal string of 40 characters (excluding H'). Format: H'39020304050607 080900010203040 50607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
ON, OFF
None
Any Type
A hexadecimal string of 40 characters (excluding H'). Format: H'390203040506070 80900010203040506 None 07080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
ATM Address
Any Type
A hexadecimal string of 40 characters (excluding H'). Format: H'39020304050607 080900010203040 50607080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
A hexadecimal string of 40 characters (excluding H'). Format: H'390203040506070 80900010203040506 None 07080900. The ATM address must start with 39, 45, or 47 to comply with the protocols.
Adjacent Node ID
Interval Type
0~31
0~31
None
Interval Type
-350~150
Authentication
Enumeration Type
None
Auto Switch to Master Address. When the master address is restored, the service can be switched to the master address automatically. NCP/CCP Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link. Max RRU Output Power
Enumeration Type
ENABLE, DISABLE
Enumeration Type
ATM, IPV4
ATM, IPV4
None
Interval Type
0~500
dB
Resource Group Bearing Type Bearing Type, which indicates whether the Resource Group Bearing Type is configured on the IP link or the ATM link. Cell Delay Variation Tolerance
IPV4
IPV4
None
ATM, IPV4
ATM, IPV4
None
Interval Type
1024~13300000
us
Client IP Address, which must be the IP address of ETHPORT. For the different links in a group may go through different transmission network, the links may use the different synchronize source. In this case, the clock mode of the IMA group should be ITC.
IP Address Type -
Enumeration Type
ITC, CTC
None
Interval Type
-350~150
Range Type
0~65535
0~65535
None
Statistic Periods
Interval Type
0~65535
0~65535
None
Measurement Lower Limit of the NEMU Standby Analog Value Input Any Type Parameters NCP/CCP Port Type Enumeration Type Enumeration Type Enumeration Type
0~4294967295
0~4294967.295, precision:0.001
None
NCP, CCP
None
SASU Mode
TMA Mode
NORMAL (Normal Mode), BYPASS NORMAL, BYPASS None (Bypass Mode) NORMAL (Normal Mode), BYPASS NORMAL, BYPASS None (Bypass Mode)
Enumeration Type
MANUAL, FREE
MANUAL, FREE
None
Work Mode
Enumeration Type
None
String Type
None
A string of up to 15 bytes
None
Diff Max Delay. The links in an IMA group go through different tranmission lines, which introduces different transmission delays and causes relative delay variation Interval Type between the links (known as Link Differential Delay). When the Link Differential Delay exceeds the capacity setting, the LODS alarms related to the link are reported.
4~100
4~100
ms
The identifier, the parameter can not include the letters of '<', '>', '?', '!', ''', '\' and '"'.
String Type
0~64 characters
0~64 characters
None
IP Address Type -
0~63
Destination IP Address. This parameter must meet all the following conditions: The IP address must be the one of legal A, B, or C type, excluding the default route (IP address IP Address Type 0.0.0.0). The IP & mask must be equal to this IP address. The mask in binary does not allow "0" before "1", or "1" after "0". Measurement Upper Limit of the NEMU Standby Analog Value Input Any Type Parameters
0~4294967295
0~4294967.295, precision:0.001
None
Destination IP Mask. This parameter must meet all the following conditions: The IP & mask must be equal to IP Address Type this IP address. The mask in binary does not allow "0" before "1", or "1" after "0".
The maximum transmit power of the local cell is the maximum output power at the antenna connector on the cabinet top. The value must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.
Interval Type
0~500
dB
Every HSDPA user will limit the power configured by the parameter Interval Type value.
1~100
1~100
NodeB Name
String Type
None
A string of up to 31 characters
None
String Type
None
A string of up to 31 characters
None
String Type
None
A string of up to 31 characters
None
String Type
None
A string of up to 31 characters.
None
None
A string of up to 31 characters.
None
Interval Type
0~3
0~3
None
Destination E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. Enumeration If a timeslot is selected, it indicates Type that the timeslot is used; otherwise, it indicates that the timeslot is not used.
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In None E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
Interval Type
32~511
32~511
None
Interval Type
0~255
None
A flag, which indicates whether the Enumeration transmission channel is the master Type one or the slave one.
MASTER, SLAVE
None
Enumeration Type
Interval Type
0~7
0~7
None
Enumeration Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or FDPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or FDPCH)
None
Whether to set the E-HICH power Enumeration control parameters for non-service Type radio link set or not This parameter specifies the power offset of the E-HICH non-serving Interval Type RLS from the power of the Common Pilot Channel. E-HICH Power Offset for Nonservice Radio Links Set. An offset is added to the power of the current 2 ms sub-frame based on the TPC Interval Type field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
NO, YES
NO, YES
None
-350~150
0~255
Enumeration Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or FDPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or FDPCH) NO, YES
None
Whether to set the E-RGCH power Enumeration control parameters for non-service Type radio links or not This parameter specifies the power offset of the E-RGCH non-serving Interval Type RL from the power of the Common Pilot Channel. E-RGCH Power Offset for Nonservice Radio Links; an offset is added to the power of the current 2 ms sub-frame based on the TPC Interval Type field power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
NO, YES
None
-350~150
0~255
Frame Max Length, which indicates the maximum length of Interval Type the FP, without the IP/UDP header after multiplexing.
100~1031
100~1031
byte
Frame Mode
Enumeration Type
FRAMEMODE_SO NET(The optical port work in SONET OC-3 FRAMEMODE_SON mode), ET, None FRAMEMODE_SD FRAMEMODE_SDH H(The optical port work in SDH STM1mode)
Normal Temperature at the Delta Air Inlet of the NCMU Heat Control Interval Type Delta Parameter
0~30
0~30
Celsi us
Normal Temperature at the Delta Air Outlet and Inlet of the NCMU Heat Control Delta Parameter
Interval Type
0~30
0~30
Celsi us
Object Alarm ID
Interval Type
1~32000
1~32000
None
Object Number
Interval Type
0~254
0~254
None
Enumeration Type
ALL(ALL), BRD(Board), E1/T1(E1/T1), ALL, BRD, E1/T1, E1/T1OnChannels E1/T1OnChannelsSu None Subbrd(E1/T1 On bbrd Channels Subboard)
Interval Type
0~1000
0~1000
mA
Tx Frame Length. A longer Tx Frame Length brings about more efficient data transmission but lower sensitivity to data transmission errors. The default value is recommended.
Enumeration Type
D32(Tx Frame Length D32), D64(Tx Frame Length D64), D128(Tx Frame Length D128), D256Tx Frame Length D256) ON, OFF
None
Enumeration Type
ON~0 OFF~1
None
Interval Type
0~1000
0~1000
mA
Operating Sort
DEV, OPE
DEV, OPE
None
V1.1, V2.0_3GPP V1.1, V2.0_3GPP NAME (ALD Name), CSAT (Cabinet No., Subrack No., NAME, CSAT, Antenna Connector SECTOR No. and Device Type), SECTOR (Site No. and Sector No.)
None
Operating Mode
Enumeration Type
None
It indicates whether you are adding the destination FACH channel to Enumeration the CMB FACH_D group or Type deleting a destination FACH channel from the group.
ADDDESFACH(Ad d destination FACH to CMB FACH_D Group), ADDDESFACH, DELDESFACH(Del DELDESFACH ete destination FACH from CMB FACH_D Group)
None
20~80
20~80
Celsi us
Interface Number
Interval Type
0~15
0~15
None
Interface Type
Enumeration Type
PPP, MPGRP
None
Interval Type
0~3
0~3
None
Interval Type
0~7
0~7
None
This parameter indicates whether to add the VLAN tag. DISABLE means not adding the VLAN tag, and ENABLE means adding the VLAN tag.
Enumeration Type
IP Address. The local IP cannot be the same as the peer IP address. The value range should meet the following conditions: The IP address is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP IP Address Type & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on mask. DISABLE(The IP header is not expected to be compressed from the peer), ENABLE(The UDP/IP header is expected to be compressed from the peer)
IP Header Compress. DISABLE means that the IP header is not expected to be compressed from Enumeration the peer end. ENABLE means that Type the UDP/IP header is expected to be compressed from the peer end.
Local IP Mask. If the IP mask is 0.0.0.0, it indicates that the IP mask must be negotiated; if the IP mask is not 0.0.0.0, the following conditions must be met: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + IP Address Type ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask in binary does not allow "0" before "1", or "1" after "0".
Enumeration Type
DISABLE(Not Join in Transmission Resource Group), DISABLE, ENABLE None ENABLE(Not Join in Transmission Resource Group)
Link No.
Interval Type
0~1
0~1
None
0~63
0~63
None
Interval Type
0~19
0~19
None
Interval Type
0~63
0~63
None
Local IP Address. The parameter must meet all the following conditions: The local IP address can be 0.0.0.0. If it is not 0.0.0.0, the IP address is of legal A, B, or C but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & IP Address Type mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. If the IP address is 0.0.0.0, it indicates that the IP address must be negotiated; if the IP address is not 0.0.0.0, it cannot be the same as the peer IP address. Port Number of the RHUB Where the Pico RRU is Located Password Enabled State of the Private Key File Local SCTP Port, which is one of the parameters between NodeB and RNC.
Interval Type
0~7
0~7
None
None
None
IP Address Mask. A valid IP address must meet all the following conditions: The IP & ~mask cannot be 0, the IP & mask cannot be 0, the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot IP Address Type be 0xffffffff. Note that "~mask" indicates the complement on the mask. The mask cannot be 255.255.255.254. The mask in binary does not allow "0" before "1", or "1" after "0". Port Number of the E1/T1 Routine Interval Type Test 0~7
0~7
None
Interval Type
0~5
0~5
None
NPSU Number
Interval Type
1~3
1~3
None
Interval Type
0~35
0~35
None
Port No.
Range Type
0~7
0~7
None
Port No.
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Interval Type
3~10000
3~10000
None
Interval Type
21~65535
21~65535
None
Multi Class PPP. DISABLE means Enumeration not using MCPPP; ENABLE means Type using MCPPP.
DISABLE(not use MCPPP), ENABLE(use MCPPP) The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second; The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
Interval Type
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second; The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
Interval Type
Min Number of Links Activated, which is a threshold indicating the available status of IMA group. For example, if this parameter is set to 3 and the number of activated IMA links in an IMA group is larger than Interval Type or equal to 3, then the IMA group is available. If the number of activated IMA links in the group is smaller than 3, then the IMA group is unavailable. MLPPP Packets Discard Alarm Appear Threshold Interval Type
1~8
1~8
None
0~100
None
None
None
Interval Type
0~7
0~7
None
Enumeration Type
None
Enumeration Type
-48VDC (-48V DC), -48VDC, 24VDC, 24VDC (24V DC), 220VAC 220VAC (220V AC) BOOL(Boolean port), VALUE(Analog port)
None
Port Type
Enumeration Type
Enumeration Type
APM100, APM100, APM200, APM200, APM30, APM30, OMB OMB A string of up to 64 characters
None
Name of the Public Key Certificate String Type File MLPPP Packets Discard Alarm Disappear Threshold
None
None
Interval Type
0~100
None
A string of up to 64 characters
None
Power Margin Ratio, to prevent the total power from exceeding the Interval Type 100% power margin in 2 ms.
0~100
0~100
Enumeration Type
DEFAULT(Use the default power), ABSOLUTE(Use DEFAULT, this absolute power ABSOLUTE value for power amplifier)
None
Enumeration Type
ON, OFF
ON, OFF
None
Interval Type
150~200000
150~200000
Interval Type
0~249
0~249
None
Interval Type
0~3
0~3
None
Interval Type
0~4294967295
0~4294967295
None
String Type
None
A string of up to 31 bytes
None
Interval Type
128~1500
128~1500
byte
RET Type
DUAL
DUAL
None
0~10 ADDULPUNIT, DELULPUNIT(MO D ULGROUP) ADDDLPUNIT, DELDLPUNIT(MO D DLGROUP) ENABLE (Support rollback), DISABLE (Not support rollback) 0~4294967295 FALSE (Not Support), TRUE (Support)
0~10
None
It indicates whether you are deleting the board from the resource group or add a board to the resource group.
Enumeration Type
Enumeration Type
Interval Type
0~4294967295
None
Enumeration Type
FALSE, TRUE
None
RRU Name
String Type
None
A string of up to 64 characters
None
PPP MuxCP. DISABLE means disabling the local protocol; Enumeration ENABLE means enabling the local Type protocol. Name of the Root Certificate File String Type
A string of up to 64 characters
None
Mode of RRU used in this local cell; if Sector Type is Distributed Sector, just use the sector type; if the mode is SYNC, the local cell uses all the RRUs in the sector where the local cell is; if the mode is UNSYNC, the local cell uses specified RRUs.
Enumeration Type
UNSYNC (use part of the sector RRUs), SYNC UNSYNC, SYNC (use all of the sector RRUs)
None
Enumeration Type
UO (UMTS ONLY), G/U (G/U DUAL MODE(Only MRRU UO~128 G/U~192 support)), GO GO~64 (GSM ONLY(Only MRRU support))
None
Enumeration Type
CODE_PRI(Code Priority:refers to power limited cell), POWER_PRI(Pow CODE_PRI, er Priority:refers to POWER_PRI, None code limited cell), POWERCODE_BAL POWERCODE_BA L(Balance between Code and Power)
Next Hop IP Address. A valid IP address must meet all the following conditions: The IP address is of legal A, B, or IP Address Type C type. The IP address cannot be 0.0.0.0 or 255.255.255.255. Next Hop IP. A valid IP address must satisfy all the following conditions:Legal A/B/C type IP address. IP address can not be 0.0.0.0 and 255.255.255.255.
IP Address Type -
Enumeration Type
OPEN, CLOSE
None
NodeB Resetting Mode After the Enumeration Download of the Configuration File Type
None
Tscross No.
Interval Type
0~15
0~15
None
Interval Type
0~65535
0~65535
None
RRU Type
Enumeration Type
None
NodeB IP Address, which indicates the NodeB IP address of the IP port. It can be classified into the following types: When the NodeB IP address is configured by the link Layer, the configured address can be used. IP Address Type When the DEVIP is configured, the DEVIP address can be used. When the NodeB IP address is obtained by the link layer negotiation, the negotiated address cannot be used but can be configured as 0.0.0.0. Value of the RTWP Initial Adjusting Interval Type Enumeration Type -130~130
dB
Node Type
LOCAL(End Node), HUB(Switching LOCAL, HUB Node) PERFFIRST (Handover performance first mode), CAPAFIRST (Capacity first mode)
None
Enumeration Type
PERFFIRST, CAPAFIRST
None
Node Type
Enumeration Type
LOCAL(End Node), HUB(Switching LOCAL, HUB, Node), ADJNODE ADJNODE(Adjace nt Node) 0~1 0~1
None
Interval Type
None
0~1
None
ON, OFF
None
Path Check. DISABLE means not using PING to detect the path Enumeration state; ENABLE means using PING Type to detect the path state. IP Path ID Interval Type
0~65535
0~65535
None
AAL2 Path ID
Interval Type
1~4294967295
1~4294967295
None
Interval Type
The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
YES (has a subboard), NO YES, NO (has no subboard) UAEC, UPEC, UUAS, UQEC, UEOC UAEC, UPEC, UUAS, UQEC, UEOC
None
Sub-Board Type
None
Subboard Type
Enumeration Type
Subboard Type
Enumeration Type
Subboard Type
Enumeration Type
The power of the HS-SCCH is an offset in dB to the transmit power of the PCPICH. The power of the HS-SCCH is valid only when the power of the HS-SCCH is controlled by predefined values. The power is a fixed value.
Interval Type
0~80
dB
Whether to set the Mac-e schedule Enumeration parameters or not Type Source logical Cell ID Interval Type
NO, YES
NO, YES
None
0~65535
0~65535
None
Interval Type
The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
Peer IP Address, which is of legal A, B, or C type but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. The IP & ~mask cannot be 0, the IP & mask cannot be 0, IP Address Type the IP & mask + ~mask cannot be 0xffffffff, and the IP & ~mask + mask cannot be 0xffffffff. Note that "~mask" indicates the complement on the mask. Peer SCTP Port is one of the parameters between NodeB and RNC. Protocol Field Compress. DISABLE means not being compressed; ENABLE means being compressed. Interval Type 1024~65535
1024~65535
None
Enumeration Type
DISABLE, ENABLE
Interval Type
0~15
0~15
None
Interval Type
1~255
None
None
Interval Type
1~31
1~31
None
Any Type
40.00~54.00
Simple Discharge Time Limit of the Interval Type Battery Capacity Test
1~240
min
Password. It is mandatory if AUTH Password Type 0~16 characters is not NONAUTH. It is sequentially numbered in the site. Up to six sectors can be configured to one site. Sector Number
0~16 characters
None
Interval Type
0~5
0~5
None
Interval Type
0~5
0~5
None
Receive Cell Rate. The RCR value must be equal to the DL bandwidth configured at the RNC. When the AAL2PATH is configured at the NodeB, the RCR will be used as the receive bandwidth, which is an Interval Type important parameter in the algorithm for flow control. Whether the RCR is configured correctly or not will affect the result of the algorithm for flow Control.
The value range is 30~20999 when rate unit is kbps; The value range is 71~49526 when rate unit is cell per second;
The value range is 30~20999 when rate unit is kbps; kbps The value range is or 71~49526 when rate cell/s unit is cell per second;
Enumeration Type
Sector ID
String Type
None
A string of up to 4 bytes
None
Sector ID
String Type
None
A string of up to 32 bytes
None
Enumeration Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or FDPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or FDPCH)
None
Whether to set the E-HICH power Enumeration control parameters for non-service Type radio link set or not This parameter specifies the power offset of the E-HICH non-serving Interval Type RLS from the power of the Common Pilot Channel. E-HICH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field Interval Type power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference.
NO, YES
NO, YES
None
-350~150
0~255
Enumeration Type
FIXED (Fixed transmit power), RNC_BASED (Dynamic transmit power control based on the Pilot of DPCH or FDPCH), FOLLOW_TPC (Dynamic transmit power control based on the TPC of DPCH or FDPCH)
None
Whether to set the E-RGCH power Enumeration control parameters for non-service Type radio links or not This parameter specifies the power offset of the E-RGCH non-serving Interval Type RL from the power of the Common Pilot Channel. E-RGCH Power Offset for Service Radio Links Set; an offset is added to the power of the current 2 ms sub-frame based on the TPC field Interval Type power of its corresponding DPCCH. This offset is related to the Signal-to-Noise Ratio difference. Serial Number String Type
NO, YES
NO, YES
None
-350~150
0~255
None
A string of up to 64 characters
None
String Type
None
A string of up to 17 bytes
None
Interval Type
0~255
0~255
None
Enumeration Type
None
RestartTimer. Timer for ConfigureRequest or Terminate-Request Interval Type packets. E-HICH Power for Single Radio Link IP address bearing traffic at the RNC. Start Date Mode of the Daylight Saving Time
1~65535
1~65535
ms
Interval Type
-350~150
-35~15 dB, step: 0.1 dB dB 0.0.0.0~255.255.255. None 255 DATE, WEEK, DATEWEEK
IP Address Type -
Enumeration Type
DATE, WEEK, DATEWEEK EPF (Enhanced Proportional Fairness), PF (Proportional Fairness), RR (Round Robin), MAXCI (Max C/I)
None
Enumeration Type
None
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
None
Slot No.
Interval Type
None
Slot No.
Range Type
0~7
0~7
None
Slot No.
Range Type
0~7
0~7
None
Slot No. of Power Amplifier1:Power Amplifier refers to the power Interval Type amplify unit in RRU.
0 None
Slot No. of Power Amplifier2:Power Amplifier refers to the power Interval Type amplify unit in RRU.
0 None
Interval Type
0 None
Interval Type
0 None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Sensor Output Lower Limit of the NEMU Standby Analog Value Input Any Type Parameters (Voltage Sensor)
0~4294967295
0~4294967.295, precision:0.001
Sensor Output Lower Limit of the NEMU Standby Analog Value Input Any Type Parameters (Current Sensor)
0~4294967295
0~4294967.295, precision:0.001
Sensor Output Upper Limit of the NEMU Standby Analog Value Input Any Type Parameters (Voltage Sensor)
0~4294967295
0~4294967.295, precision:0.001
Sensor Output Upper Limit of the NEMU Standby Analog Value Input Parameters(For Current Sensor)
Any Type
0~4294967295
0~4294967.295, precision:0.001
Interval Type
1~525600
1~525600
min
Resource Group ID
Interval Type
0~3
0~3
None
Enumeration Type
km/h
Enumeration Type
No, Yes
No, Yes
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Enumeration Type
IMA(Bearing Port Type is IMA), UNI(Bearing Port Type is UNI), FRAATM(Bearing Port Type is FRAATM)
Expected Rx Switch, if it is empty, Enumeration the Rx Expected Trace Byte Type Setting will not be changed.
None
Enumeration Type
None
Enumeration Type
Range Type
0~7
0~7
None
Range Type
0~7
0~7
None
Range Type
0 None
Enumeration Type
None
Rate unit
Enumeration Type
KBIT/S, CELL/S
KBIT/S, CELL/S
None
Rx Bandwidth. This is an important parameter for the flow control algorithm. The value of RXBW must be equal to the DL bandwidth Interval Type at the RNC. If not, the result of flow control algorithm will be affected.
8~100000
8~100000
kbit/s
Interval Type
0~255
Subrack No.
Interval Type
0~8, 20~254
0~8, 20~254
None
Subrack No.
Range Type
0 None
Subrack No.
Range Type
0 None
Subrack No. of Power Amplifier1: Power Amplifier refers to the power Interval Type amplify unit in RRU.
20~254
20~254
None
Subrack No. of Power Amplifier2: Power Amplifier refers to the power Interval Type amplify unit in RRU.
20~254
20~254
None
Interval Type
20~254
20~254
None
Interval Type
20~254
20~254
None
Interval Type
0 None
Range Type
0 None
Interval Type
0 None
Range Type
0 None
Interval Type
0 None
Range Type
0 None
Interval Type
0 None
Range Type FAN (Fan Subrack), EXT (Extension Subrack), RFU (RFU Subrack)
0 None
Subrack Type
Enumeration Type
None
Expected Rx Type
Enumeration Type
TRACE_1BYTE(O ne byte type), TRACE_1BYTE, TRACE_16BYTE(1 TRACE_16BYTE, 6 byte CRC type), TRACE_64BYTE TRACE_64BYTE(6 4 Byte type)
None
Expected Rx Information
Any Type
0~64 characters
0~64 characters
None
Expected Rx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For Enumeration interworking with equipment Type developed prior to this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option. SAAL Link No. Interval Type
REVISION_2ND(S econd Revision. Padding with T.50 "NUL"), REVISION_2ND, EARLIER_VER(Pri EARLIER_VER or to Second Revision. Padding with T.50 space)
None
0~63 The value range is 30~6759 when rate unit is kbps; The value range is 71~15942 when rate unit is cell per second;
0~63
None
Interval Type
The value range is 30~6759 when rate unit is kbps; kbps The value range is or 71~15942 when rate cell/s unit is cell per second;
Start Time of the Daylight Saving Time (At a Non-DST). Start Time of the E1/T1 Routine Test
Format:HH&MM&SS None
Interval Type
The value range is 30~6759 when rate unit is kbps; The value range is 71~15942 when rate unit is cell per second;
The value range is 30~6759 when rate unit is kbps; kbps The value range is or 71~15942 when rate cell/s unit is cell per second;
Interval Type
0~4294967295
0~4294967295
None
Site Number
Interval Type
0~4294967295
0~4294967295
None
Site Name
String Type
None
A string of up to 31 bytes
None
Scramble Mode
Enumeration Type
ENABLE(Scramble , it must be ENABLE, when E1/T1 adopts AMI ENABLE, DISABLE None mode), DISABLE(No scramble)
Interval Type
0~19
0~19
None
Interval Type
1~6
1~6
None
Switch of the Time Synchronization Enumeration of the SNTP Client Parameters Type
ON, OFF
None
Second local IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, the IP address is of legal A, B, or IP Address Type C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address but must be an active interface address of this board.
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), SUN, MON, TUE, WED(Wednesday), WED, THU, FRI, THU(Thursday), SAT FRI(Friday), SAT(Saturday)
None
Second peer IP address of SCTP association. This parameter is one of those between NodeB and RNC. This parameter must be set to meet the following conditions: This parameter can be set to 0.0.0.0. If it is not set to 0.0.0.0, IP Address Type the IP address is of legal A, B, or C type, but cannot be the reserved IP address 0.x.x.x or 127.x.x.x. If it is set to 0.0.0.0, this parameter is not used. The parameter cannot be equal to any other SCTP link IP address. Automatic Alarm Handling Switch After the VSWR Alarm Smooth Power Change Function Switch Enumeration Type Enumeration Type ON (Switch on), OFF (Switch off) OPEN (OPEN), CLOSE (CLOSE)
ON, OFF
None
OPEN, CLOSE
None
Enumeration Type
FIRST(First), SECOND(Second), FIRST, SECOND, THIRD(Third), THIRD, FOURTH, FOURTH(Fourth), LAST LAST(Last)
None
IPCLK Server IP Address, which should belong to legal A, B, or C type but cannot be the reserved IP IP Address Type address 0.x.x.x or 127.x.x.x. The CIP and SIP should be different. Temperature Compensation Coefficient Interval Type 0~500
0~500
Celsi us
Enumeration Type
MASTER(Master cabinet)
MASTER
None
Interval Type
0~3
0~3
None
Interval Type
30~240
30~240
Antenna Tilt
Interval Type
-100~300
-100~300*0.1, Step:0.1
degre e
Range Type
-100~127
-10~12.7, Step:0.1
degre e
Range Type
-10~30
-100~300, Step:10
degre e
Source E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. Enumeration If a timeslot is selected, it is Type crossed to the timeslot. Otherwise, it is not crossed.
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In None E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
Interval Type
32~511
32~511
None
Interval Type
0~255
0~255
None
Interval Type
-10.00~55.00
-10.00~55.00
Celsi us
Minimum Preferable Value of the Temperature at the Delta Air Outlet Interval Type of the NCMU Heat Control Delta Parameter
-99~70
-99~70
Celsi us
Start Time
Compound Type
Time Offset of the Daylight Saving Interval Type Time Enumeration Type
-120~120
-120~120
None
None
Optical Port Number of the Tail Interface Board (For Ring Topology Interval Type Only)
0~5
None
Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is RTVBR or NRTVBR, both PCR and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
Enumeration Type
RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real Time Variable Bit RTVBR, NRTVBR, Rate), UBR, UBR+ UBR(Unspecified Bit Rate), UBR_PLUS(Unspe cified Bit Rate+)
None
Bearing Service Type. When the value is CBR or UBR, only PCR needs to be set; when the value is Enumeration RTVBR or NRTVBR, both PCR Type and SCR need to be set; when the value is UBR+, both PCR and MCR need to be set.
CBR(Constant Bit Rate), RTVBR(Real Time Variable Bit Rate), NRTVBR(Non-Real CBR, RTVBR, Time Variable Bit NRTVBR, UBR, Rate), UBR+ UBR(Unspecified Bit Rate), UBR_PLUS(Unspe cified Bit Rate+)
None
STM1 No.
Range Type
0~1
0~1
None
Slot Number of the Tail Interface Board (For Ring Topology Only)
Interval Type
2~3
2~3
None
Interval Type
0 None
Enumeration Type
CHAIN, RING
None
Interval Type
-10.00~55.00
Celsi us
Sub Frame Max Length, which indicates the maximum length of the FP before multiplexing. The FP Interval Type can be multiplexed only when its frame length is smaller than this value.
1~1023
1~1023
byte
Enumeration Type
Trace Byte
Enumeration Type
J0, J1, J2
None
Interval Type
1~20
1~20
ms
16th TimeSlot Support. This parameter is valid when the timeslot is in E1 mode. Tx Unit No.
Enumeration Type
Range Type
0~1
0~1
None
Enumeration Type
ON, OFF
None
E1/T1 Time Slot No. A map of the timeslot, denoted in binary format. Enumeration If a timeslot is selected, it is Type crossed to the timeslot. Otherwise, it is not crossed.
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
A map of the timeslot, denoted in binary format. If a timeslot is selected, it is crossed to the timeslot with the same No. of E1 0. Or else, it is not crossed. Select "SELECT ALL" or "CLEAR ALL" to select or not select all the timeslots. In None E1 mode, TS1~TS31 respectively corresponds to timeslots 1~31. Timeslots 0 cannot be configured. In T1 mode, TS1~TS24 respectively corresponds to timeslots 1~24, and the other timeslots are unavailable.
Tx Bandwidth
Interval Type
8~100000
8~100000
kbit/s
The TXBW of RSCGRP should be smaller than or equal to the Interval Type physical port bandwidth.
32~15800
32~15800
kbit/s
Sensor Type of the NEMU Standby Enumeration Analog Value Input Parameters Type
VOLTAGE, CURRENT
None
Interval Type
0~1000
0~1000
mA
Any Type
57.00~60.00
57.00~60.00, precision:0.01
Any Type
None
None
None
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~1000
0~1000
ns
Interval Type
0~65535
0~65535
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Tx CBS. Recommended value: 1/2 Interval Type of the TX bandwidth. Tx EBS Interval Type
15000~155000000 15000~155000000
bit
0~155000000
0~155000000
bit
Interval Type
0~1000
0~1000
mA
Interval Type
0~255
min
None
None
Tx Type
Enumeration Type
TRACE_1BYTE(O ne byte type), TRACE_1BYTE, TRACE_16BYTE(1 TRACE_16BYTE, 6 byte CRC type), TRACE_64BYTE TRACE_64BYTE(6 4 Byte type)
None
Tx Information
Any Type
0~64 characters
0~64 characters
None
Vendor Code
String Type
None
A string of up to 64 characters
None
Tx Procotol Version. According to the Second Revision of ITU-T 3/G.831, the trace message will be padded with T.50 "NUL" character to get a maximum available byte character string. For interworking Enumeration with equipment developed prior to Type this version of protocol that may use the T.50 space as a padding character, new equipment should be able to generate T.50 "SPACE" padding characters as an option.
REVISION_2ND(S econd Revision. Padding with T.50 "NUL"), REVISION_2ND, EARLIER_VER(Pri EARLIER_VER or to Second Revision. Padding with T.50 space)
None
Any Type
0~64 characters
0~64 characters
None
Interval Type
0~7
0~7
None
Bearing VCI
Interval Type
32~511
None
Enumeration Type
V1.0, V1.1
None
Interval Type
0~3
0~3
None
VLAN ID
Interval Type
1~4094
1~4094
None
VLAN Mode
Enumeration Type
SINGLEVLAN, VLANGROUP
None
VLAN Priority, which indicates the Interval Type priority level of VLAN
0~7
0~7
None
Bearing VPI
Interval Type
0~255 VP_SWITCH(VC Switch), VC_SWITCH(VP Switch) 0~1000 DEM_2_CHAN (2Channels Demodulation Mode), DEM_4_CHAN (4Channels Demodulation Mode), DEM_ECON_4_C HAN (Economical 4-Channels Demodulation Mode)
0~255
None
Enumeration Type
VP_SWITCH, VC_SWITCH
None
Interval Type
0~1000
None
Work Mode
Enumeration Type
None
Time Zone (If it is not specified, the time zone settings do not change.)
Enumeration Type
GMT-1200 (GMT12:00), GMT-1100 (GMT-11:00), GMT-1000 (GMT10:00), GMT-0900 (GMT-09:00), GMT-0800 (GMT08:00), GMT-0700 (GMT-07:00), GMT-0600 (GMT06:00), GMT-0500 (GMT-05:00), GMT-0400 (GMT04:00), GMT-0330 (GMT-03:30), GMT-0300 (GMT03:00), GMT-0200 (GMT-02:00), GMT-0100 (GMT01:00), GMT (GMT), GMT+0100 (GMT+01:00), GMT+0200 (GMT+02:00), GMT+0300 (GMT+03:00), GMT+0330 (GMT+03:30), GMT+0400 (GMT+04:00), GMT+0430 (GMT+04:30), GMT+0500 0~1
GMT-1200 (GMT12:00), GMT-1100 (GMT-11:00), GMT1000 (GMT-10:00), GMT-0900 (GMT09:00), GMT-0800 (GMT-08:00), GMT0700 (GMT-07:00), GMT-0600 (GMT06:00), GMT-0500 (GMT-05:00), GMT0400 (GMT-04:00), GMT-0330 (GMT03:30), GMT-0300 (GMT-03:00), GMT0200 (GMT-02:00), GMT-0100 (GMTNone 01:00), GMT (GMT), GMT+0100 (GMT+01:00), GMT+0200 (GMT+02:00), GMT+0300 (GMT+03:00), GMT+0330 (GMT+03:30), GMT+0400 (GMT+04:00), GMT+0430 (GMT+04:30), GMT+0500 (GMT+05:00), GMT+0530 (GMT+05:30), 0~1 None
range
Check mode
range
0~2
0~2
None
IQ Data Length
range
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28.If the check mode is POW_MODE, the range is 0xFF for invalid value.
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28.If the byte check mode is POW_MODE, 255 for invalid value.
range
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value.
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18, If the None check mode is IQ_MODE, the range is 0xFF for invalid value.
range
5~50
0.5s~5s
0.1se c
Detect Period
range
100~5000
0.1s~5s
ms
When the signal linearity range is bigger than the threshold, the detect is started.
range
0~4294967295
0~4294967295
dBFS
Unit Number
Enumerate
None
Carrier Index 1
range
0~3
0~3
None
Unit Index 1
range
0~1
0~1
None
Carrier Index 2
range
0~3
0~3
None
Unit Index 2
range
0~1
0~1
None
Carrier Index 3
range
0~3
0~3
None
Unit Index 3
range
0~1
0~1
None
Carrier Index 4
range
0~3
0~3
None
Unit Index 4
range
0~1
0~1
None
Carrier Index 5
range
0~3
0~3
None
Unit Index 5
range
0~1
0~1
None
Carrier Index 6
range
0~3
0~3
None
Unit Index 6
range
0~1
0~1
None
Carrier Index 7
range
0~3
0~3
None
Unit Index 7
range
0~1
0~1
None
Carrier Index 8
range
0~3
0~3
None
Unit Index 8
range
0~1
0~1
None
Rate Unit
Enumerate
kbps, cell/s
kbps, cell/s
None
Protocol Type
Enumerate
HW_DEFINED, PTP
Range Type
0~127
0~127
None
Enumerate
MASTER, SLAVE
MASTER, SLAVE
None
String Type
1~43byte
None
Maintenance level
Range Type
0~7
0~7
None
String Type
1~43byte
None
String Type
1~43byte
None
Virtual LAN ID
Range Type
1~4094
1~4094
None
Maintenance End Point ID, only in Range Type VLAN Remote Maintenance End Point ID Range Type Remote Maintenance End Point MAC address
1~8191
1~8191
None
1~8191
1~8191
None
String Type
1~13 byte
None
Destination IP Address
IP Address Type -
Enumeration Type
ETH, ETHTRK
ETH, ETHTRK
None
Port No.
Range Type
0~3
0~3
None
Range Type
0~3
0~3
None
Source IP Address
0.0.0.0~255.255.255. None 255 0.0.0.0~255.255.255. None 255 SINGLE_HOP, MULTI_HOP 10~1000 None
Destination IP Address
IP Address Type None Enumeration Type Range Type SINGLE_HOP, MULTI_HOP 10~1000
Hop Type
ms
User configure local RX interval User configure local detect multiplier TrunkNo.
Range Type
10~1000
10~1000
ms
Range Type
3~10
3~10
None
0~1
None
Lacp Switch
DISABLE, ENABLE
None
ArpProxy
DISABLE, ENABLE
Frame Error Rate AppearThreshold Range Type of FE MAC Layer Frame Error Rate DisappearThreshold of FE MAC Layer Ethernet Port No. in TRUNK
0~100
0~100
Range Type
0~100
0~100
Range Type
0~3
0~3
Range Type
0~10
0~10
Time s
Max HARQ Retransmission Times of Non-Conversational serive in Range Type Cell DCH state
0~10
0~10
Time s
Enumeration Type
CQI, FIXED
None
Enumeration Type
CQI, FIXED
None
Range Type
1~999
1~999
Enumeration Type
NO_CQI_ADJ(Not CQI Adjust NO_CQI_ADJ, Algorithm), CQI_ADJ_BY_RBLE None CQI_ADJ_BY_RBL R ER(CQI Adjusted by RBLER), NO_CQI_ADJ(Not CQI Adjust NO_CQI_ADJ, Algorithm), CQI_ADJ_BY_IBLE None CQI_ADJ_BY_IBL R ER(CQI Adjusted by IBLER)
Enumeration Type
Residual BLER Target is valid only when the CQI Adjust Algorithm is Range Type set to CQI_ADJ_BY_RBLER
1~50
1~50
OPEN, CLOSE
0, 1
None
OPEN, CLOSE
0, 1
None
Range Type
0~26843545
0~26843545
None
0~26843545
0~26843545
None
Range Type
1~80
1~80
1~80
1~80
None
None
None
None
range
None
Check mode
range
0~2 If the check mode is POW_IQ_MODE or IQ_MODE, the range is 9~28;If the check mode is POW_MODE, the range is 0xFF for invalid value.
0~2
None
IQ Data Length
range
If the check mode is POW_IQ_MODE or IQ_MODE, the range is 2^9~2^28;If the byte check mode is POW_MODE, 255 for invalid value.
range
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the check mode is IQ_MODE, the range is 0xFF for invalid value. 5~50
If the check mode is POW_IQ_MODE or POW_MODE, the range is 9~18.If the None check mode is IQ_MODE, the range is 0xFF for invalid value. 0.5s~5s 0.1se c ms
range
Period of Detecting When the signal linearity range is bigger than the threshold, the detect is started. Unit Number
range
100~5000
0.1s~5s
range
0~4294967295
0~4294967295
dBFS
Enumerate
None
Carrier Index 1
range
0~3
0~3
None
Unit Index 1
range
0~1
0~1
None
Carrier Index 2
range
0~3
0~3
None
Unit Index 2
range
0~1
0~1
None
Carrier Index 3
range
0~3
0~3
None
Unit Index 3
range
0~1
0~1
None
Carrier Index 4
range
0~3
0~3
None
Unit Index 4
range
0~1
0~1
None
Carrier Index 5
range
0~3
0~3
None
Unit Index 5
range
0~1
0~1
None
Carrier Index 6
range
0~3
0~3
None
Unit Index 6
range
0~1
0~1
None
Carrier Index 7
range
0~3
0~3
None
Unit Index 7
range
0~1
0~1
None
Carrier Index 8
range
0~3
0~3
None
Unit Index 8
range
0~1 When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM) When SBT is UNCHANNELLED _COVERBARD, choose STM1 (Unchannelled STM1) When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM) when SBT is E1_COVERBOAR D: PPP(PPP), MPGRP(MLPPPP GROUP) are available. when SBT is ETH_COVERBOA RD: ETH(ETHPORT), ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPB ACK INTERFACE) are available. when SBT is BACK_BOARD: PPP(PPP) is available.
0~1
None
Enumeration Type
When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM) When SBT is UNCHANNELLED_ COVERBARD, None choose STM1 (Unchannelled STM1) When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM)
Port Type
Enumeration Type
when SBT is E1_COVERBOARD: PPP(PPP), MPGRP(MLPPPP GROUP) are available. when SBT is ETH_COVERBOAR D: ETH(ETHPORT), None ETHTRK(Ethernet Trunk Group) , LOOPINT(LOOPBA CK INTERFACE) are available. when SBT is BACK_BOARD: PPP(PPP) is available.
Enumeration Type
When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPB ACK INTERFACE) When SBT is E1_COVERBOAR D, choose PPP (PPP) or MPGRP (MLPPP Group) When SBT is ETH_COVERBOA RD, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPB ACK INTERFACE) When SBT is BACK_BOARD, choose PPP(PPP)
When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBA CK INTERFACE) When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP None Group) When SBT is ETH_COVERBOAR D, choose ETH (ETH), ETHTRK (Ethernet Trunk Group), or LOOPINT(LOOPBA CK INTERFACE) When SBT is BACK_BOARD, choose PPP(PPP)
Port Type
Enumeration Type
E1T1~ETH: when SBT is BASE_BOARD; STM1:when SBT is UNCHANNELLED _COVERBOARD; E1T1: when SBT is E1_COVERBOAR D
E1T1~ETH: when SBT is BASE_BOARD; STM1:when SBT is None UNCHANNELLED_ COVERBOARD; E1T1: when SBT is E1_COVERBOARD
Port Type
Enumeration Type
it is valid when BEAR is ATM mode Value range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)
it is valid when BEAR is ATM mode Value range: IMA (Bearing Port Type is IMA), UNI (Bearing Port Type is UNI), None STM1 (Bearing Port Type is STM1), FRAATM (Bearing Port Type is FRAATM)
Enumeration Type
Value range: When the bear type is ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM) When SBT is UNCHANNELLED _COVERBARD, choose STM1 (Unchannelled STM1) When SBT is BACK_BOARD, choose UNI (UNILNK), or FRAATM (FRAATM) When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPB ACK INTERFACE) When SBT is E1_COVERBOAR
Value range: When the bear type is ATM, When SBT is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM) When SBT is UNCHANNELLED_ COVERBARD, choose STM1 (Unchannelled STM1) When SBT is BACK_BOARD, None choose UNI (UNILNK), or FRAATM (FRAATM) When the bear type is IPV4, When SBT is BASE_BOARD, choose PPP (PPP), MPGRP (MLPPP Group), ETH (ETH), or LOOPINT(LOOPBA CK INTERFACE) When SBT is E1_COVERBOARD, choose PPP (PPP) or MPGRP (MLPPP
Enumeration Type
IP Packets Discard Alarm Appear Threshold Interval Type Unit: one in a thousand 0~100 0~100 None
Interval Type
0~100
0~100
None
Enumeration Type
Range Type
0~7
0~7
None
If SN = 0~5, If SN = 0~5, E1_COVERBOAR E1_COVERBOARD: None D:E1 Coverboard E1 Coverboard 0~3: When SBT is BASE_BOARD; 0~7: When SBT is E1_COVERBOAR D; 0~3: When SBT is BACK_BOARD. 0~7 NOCRC~1 CRC_16~2 CRC_32~4 1~8191 0~3: When SBT is BASE_BOARD; 0~7: When SBT is None E1_COVERBOARD; 0~3: When SBT is BACK_BOARD.
Range Type
None
Frame CRC
None
None
Subboard Type
Enumeration Type
None
3ah Switch
Enumeration Type
DISABLE, ENABLE Refers to PTP priority. Value range: 0~7:when PRIRULE is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP. Note: 0 indicates that the statistics is not cleared and 1 indicates that the statistics is cleared. 1~256
PTP Priority
Range Type
Refers to PTP priority. Value range: 0~7:when PRIRULE None is IPPRECEDENCE, 0 ~63:when PRIRULE is DSCP. Note: 0 indicates that the statistics is not cleared and 1 None indicates that the statistics is cleared. 1~256 None
Clear Statistic
Range Type
This parameter indicates the number of the sent packets. This parameter indicates the size of the sent packet.
Range Type
Range Type
95~1500
95~1500
bytes
This parameter indicates the preset timeout (unit: s). Range Type This parameter indicates the preset interval (unit: s). Range Type
1~65535
1~65535
1~60
1~60
ETHTRK(ETHTRK ), MPGRP(MLPPP ETHTRK(ETHTRK), None GROUP), MPGRP, ETH ETH(ETH) APM100, APM200, APM30 APM100, APM200, APM30 None
Default Value
Recommended Value
Impact
Parameter Relationship
None
20 Cell
None
None
10 Cell
None
None
OPEN
Cell
None
None
25 Cell
None
None
15 Cell
None
None
30 Cell
None
None
15 Cell
None
None
10 Cell
None
None
None
NodeB
None
None
None
NodeB
280 None
NPMU
This parameter value must be greater than [PARA]ACVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML] [PARA]ACVLL[/PARA] is less than [PARA]ACVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML] None
180 None
NPMU
None
None
OMCH
500000
500000 NodeB
None
None
None
NodeB
None
None
None
Cell
None
None
NodeB
None
None
None
NodeB
This parameter is valid only when the [PARA]OBJN[/PARA] is set "BRD", E1/T1(E1/T1), E1/T1OnChannelsSubbrd. When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing binding relation is not changed. If the original setting of the system is 0, the alarm ID is invalid. This parameter is valid when the [PARA]BEAR[/PARA] parameter in [MML]ADD OMCH[/MML] is set to IPV4.
None
None
NodeB
NO
None
OMCH
MASTER
MASTER
Cell
None
None
None(ADD SEC)
Cell
ANTA
None
Cell
None
None(ADD SEC)
Cell
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B; For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B; For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254; For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
MASTER
MASTER
Cell
None
None
None(ADD SEC)
Cell
ANTA
None
Cell
None
None(ADD SEC)
Cell
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B; For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B; For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254; For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
MASTER
MASTER
Cell
None
None
None(ADD SEC)
Cell
None
None(ADD SEC)
Cell
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B; For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254; For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254;
MASTER
MASTER
Cell
None
None
None(ADD SEC)
Cell
For DBS:when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to REMOTE_SECTOR, the value range is R0A, R0B. For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is set to LOCAL_SECTOR, the value range is N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B;
None
None(ADD SEC)
Cell
For DBS:When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254; For BTS:REMOTE_SECTOR and LOCAL_SECTOR is valid.When [PARA]SECT[/PARA] is set to LOCAL_SECTOR, the value range is 4~5.When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254; This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR or LOCAL_SECTOR. When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_2_CHAN, there will be 1 or 2 antena; When [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is set to DEM_4_CHAN or DEM_ECON_4_CHAN , there will be 1/2/4 antena.
None
None
Cell
1.00E-05 1ENone5
NodeB
None
None
None
NodeB
None
None
None
NEMU
None
None
None
Battery
This parameter TDSTM is valid only when [PARA]TDSTM[/PARA] in [MML]SET BATATPA[/MML] is set to "PERIOD" or "PERIODPOWERCUT"
None
None
NodeB
None
1000
1000 SAAL
None
None
None
NodeB
None
OFF
None
NodeB
None
None
None
NodeB
None
None
None
NEMU
None
None
None
NodeB
When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is BOOL, this parameter is valid. This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV. This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV. This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV.
No
No
No
No
No
No
No
No
No
No
No
No
This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV. This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV. This parameter is valid when [PARA]OPESORT[/PARA] in [MML]SET ALDDEV[/MML] is set to DEV. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0 or 3GPP
No
No
No
No
No
No
None
None
No
None
None
No
None
None
NodeB
The value range is 30~600 when [PARA]PTYPE[/PARA] is APM100. The value range is 30~600 when [PARA]PTYPE[/PARA] is APM200. The value range is 5~600 when [PARA]PTYPE[/PARA] is APM30.
60
60 NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None This parameter must be greater than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and less than [PARA]DCVHL[/PARA] in [MML]SET ACDCVLIMIT[/MML]-1, and between 43.2 and 57.6. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V1.1. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
56.5
56.5 NodeB
None
None
No
None
None
No
None
None
No
None
None
No
None
None
No
None
None
No
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
None
None
No
1 NodeB
None
None
None
OMCH
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA]. This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES.The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA]. This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE. None
None
None
OMCH
None
None
NodeB
None
None
No
ENABLE
ENABLE
NodeB
None
None
NodeB
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to RING.
0 None
NodeB
None
DISABLE
None
IUBCP
None
None
None
NodeB
None
None
None
NodeB
This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
ENABLE
ENABLE
NodeB
None
ENABLE
None
NodeB
If the value is "ENABLE", the value of [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] is valid. The parameter is valid only when the [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable.
43 None
NodeB
None
10 Ethport
None
None
NodeB
None
None
None
NodeB
The parameter is valid only when the [PARA]SWT[/PARA] in [MML]ACT SOFTWARE[/MML] is set to HOMOBRDSW or HOMOBRDROM. BTEM could be configed when [PARA]BFLG[/PARA] in [MML]SET HTPROTECT[/MML] is ENABLE None
53
53 NodeB
0 None
NodeB
REGULAR
REGULAR
NodeB
None
None
8 Ethport
None
None
NodeB
MASTER
MASTER
OMCH
None
DISABLE
DISABLE
NodeB
None
None
NodeB
BEST_EFFORT
None
NodeB
None
COMPRESSED
COMPRESSED
NodeB
None
None
NodeB
OFF
OFF
NodeB
None This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML] This parameter is valid only when [PARA]TYPE[/PARA] in [MML]STR RTWPRTTST[/MML] is set to "CHANGE" or "CHANGE_THRESHOLD"
ALL
ALL
NodeB
None
None
NodeB
None
None
NodeB
None
270
270 NodeB
This parameter is valid only when the [PARA]FPMUXSWITCH[/PA RA] parameter in [MML]SET FPMUX[/MML] is set to ENABLE. The difference between [PARA]FRAMELEN[/PARA]( Frame Max Length) and [PARA]SUBFRAMELEN[/PA RA](Sub Frame Max Length) is greater than 4. The value of this paramter must be greater than or equal to the value of [PARA]KATM[/PARA].
15000
15000 SAAL
None
None
OMCH
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF. This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 , [PARA]BRT[/PARA] is set to YES and [PARA]RT[/PARA] is set to IF.
None
None
OMCH
75 None
NodeB
None
LINE
LINE
NodeB
This parameter is valid only when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to "MANUAL"
None
None
NodeB
None
MASTER(ADD AAL2PATH) MASTER(ADD ALD) MASTER(ADD BACKE1T1) MASTER(ADD BRD) None(ADD CABINET) MASTER(ADD DEVIP) MASTER(ADD FRAATM) MASTER(ADD IMAGRP) MASTER(ADD IMALNK) MASTER(ADD IP2RSCGRP) MASTER(ADD IPCLKLNK) MASTER(ADD IPPATH) MASTER(ADD IPRT) MASTER(ADD LNKSRC) MASTER(ADD MPGRP) MASTER(ADD MPLNK) MASTER(ADD NPSU)
MASTER(ADD AAL2PATH) MASTER(ADD ALD) MASTER(ADD BACKE1T1) MASTER(ADD BRD) None(ADD CABINET) MASTER(ADD DEVIP) MASTER(ADD FRAATM) MASTER(ADD IMAGRP) MASTER(ADD IMALNK) MASTER(ADD NodeB IP2RSCGRP) MASTER(ADD IPCLKLNK) MASTER(ADD IPPATH) MASTER(ADD IPRT) MASTER(ADD LNKSRC) MASTER(ADD MPGRP) MASTER(ADD MPLNK) MASTER(ADD NPSU) None(ADD OBJALMSHLD) MASTER(ADD
The value and relation of Cabinet No., Subrack No.and Slot No.: Cabinet No. Subrack No. Slot No. Board type 0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit) 0 6 0 NEMU (NodeB Environment For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR. For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR. For DBS:This parameter is valid only When the [PARA]SECT[/PARA] is REMOTE_SECTOR. For BTS:This parameter is valid When the [PARA]SECT[/PARA] is REMOTE_SECTOR and LOCAL_SECTOR.
MASTER
None
Cell
MASTER
None
Cell
MASTER
None
Cell
ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR. ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PAR A] is UNSYNC. ADD SEC:This parameter is valid only When the [PARA]SECT[/PARA] is DIST_SECTOR. ADD LOCELL:This parameter is valid noly When the [PARA]SECT[/PARA] is DIST_SECTOR, at the same time[PARA]RRUMODE[/PAR A] is UNSYNC. None
MASTER
None
Cell
MASTER
MASTER
NodeB
MASTER
MASTER
NodeB
None
MASTER
MASTER
NodeB
None
MASTER
MASTER
NodeB
None
None
None
NodeB
None
ALL
None
NodeB
None
64 None
NodeB
It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML]. It is valid only When [PARA]DIVM[/PARA] in [MML]ADD SEC[/MML] is HALFFREQ. [SET LOCALIP] The IP address for local maintenance, IP address of the Ethernet port, and IP address for remote maintenance must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel cannot be on the same network segment. In addition, the network segments of the three types of IP address must be exclusive of each other. Check whether two IP addresses are on the same network segment by using the following formula: (IpValueA & IpMaskA==IpValueB & IpMaskB)&&(IpMaskA==IpM askB) Check whether two network segments are exclusive of each other by using the following formulas: 1. IpMask=IpMaskA & IpMaskB 2. IpValueA & IpMask==IpValueB & IpMask IP & ~mask cannot be 0
None
None
Cell
None
None
NodeB
None
None
OMCH
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
None
None
Cell
None
None
None
NodeB
None
None
NodeB
None
None
None
DISABLE
None
NodeB
None This parameter is valid only when [PARA]CSLSDF[/PARA] in [MML]SET SDPA[/MML] is set to "ENABLE" None
-10 None
NodeB
None
None
No involved
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML]. It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML].
None
None
NodeB
None
None
NodeB
2 None
NCMU
None
None
None
Cell
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
58
58 NPMU
48.5
48.5 NPMU
This parameter value must be greater than [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML], less than [PARA]FCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML]-2 This parameter value must be greater than [PARA]BSDV[/PARA] in [MML]SET SDPA[/MML] when [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to "Disable" This parameter value must be greater than 35 when [PARA]LSDF[/PARA] and [PARA]BSDF[/PARA] in [MML]SET SDPA[/MML] are both set to "Disable" The [PARA]DDSTM[/PARA] value must be smaller than [PARA]TDSTM[/PARA] value in [MML]SET BATATPA[/MML]. This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR. The resource group is added when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM. This parameter must be greater than or equal to the value of [PARA]POLL[/PARA]. This parameter must be smaller than or equal to the value of [PARA]IDLE[/PARA]. This parameter must be smaller than the value of [PARA]NRTM[/PARA].
14 None
Battery
Cell
DISABLE
None
OMCH
2000
2000 SAAL
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
V1.1
V1.1
NodeB
None
None
None
Cell
None
None
None
NodeB
None
None
None
NodeB
None This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.
None
None
NodeB
None
Cell
This parameter is valid only when the sector type of local cell is not distributed sector.
COMMON_MODE COMMON_MODE
Cell
This parameter is invalid when the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR; HALFFREQ is valid when [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, N0A, N1A, N2A, N3A, N4A, N5A.
None
None
Cell
None
None
None(ADD DLGROUP)
NodeB
None
0(ADD LOCELL)
None
Cell
None
None
None
SCTP
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
Battery
None
None
None
NodeB
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
None
None
NodeB
None
None
NodeB
None
None
OMCH
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
4 SAAL
None
67
67 SAAL
None
25
25 SAAL
None
None
None
Battery
None The value range is 0~1 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]DSTPT[/PARA] is IMA and [PARA]DSTSBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]DSTPT[/PARA] is UNI and [PARA]DSTSBT[/PARA] is E1_COVERBOARD;
0 None
NodeB
0 None
NodeB
The value range is 0~3 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]DSTPT[/PARA] is FRAATM and [PARA]DSTSBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]DSTSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]DSTSBT[/PARA] is E1_COVERBOARD;
None
None
NodeB
None
None
NodeB
None
None
None
OMCH
This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to UBR+ . When the value range of [PARA]DSTSN[/PARA] is 6~7, [PARA]DSTSBT[/PARA] is BASE_BOARD. BASE_BOARD: when the board in destination slot is WMPT; E1_COVERBOARD:When the board in destination slot is UTRP Value range: BASE_BOARD, E1_COVERBOARD
None
None
None
NodeB
The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7; The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15; None
None
None
NodeB
ATM
None
NodeB
None
None
None
OMCH
This parameter is valid only when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4, [PARA]BRT[/PARA] is set to YES, [PARA]SN[/PARA] is set to 67 and [PARA]RT[/PARA] is set to NEXTHOP . This parameter must be greater than the value of [PARA]KATM[/PARA]. The value range is 0~7 when [PARA]PRIRULE[/PARA] is set to IPPRECEDENCE. The value range is 0~63 when [PARA]PRIRULE[/PARA] is set to DSCP.
15000
15000 SAAL
None
None
NodeB
None
OPEN
Cell
None
None
FIXED
Cell
NO
None
Cell
None It is valid when [PARA]EAGCHPCMOD[/PA RA] is FIXED in [MML]SET MACEPARA[/MML]. It is valid when [PARA]EAGCHPCMOD[/PA RA] is RNC_BASED, FOLLOW_TPC, CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML]. When the [PARA]BEAR[/PARA] parameter in the MML command is set to ATM , and [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].
None
-132 Cell
None
142 Cell
None
None
OMCH
None
None
NodeB
End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]". [PARA]EDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and EM is DATEWEEK or DATE in [MML]SET TZ[/MML]. None
None
None
NodeB
None
None
Battery
None
None
NodeB
None
None
NodeB
None
None
NodeB
[PARA]EMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].
None
None
No involved
None
None
None
Battery
None
None
None
OMCH
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
None
None
OMCH
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask. [PARA]ET[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
None
None
NodeB
None
None
NodeB
End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]" must be later than the current date and time. Start Date and Start Time"[PARA]SD[/PARA] and [PARA]ST[/PARA]in [MML]STR E1T1RTTST[/MML]" plus test time must be earlier than the End Date and End Time"[PARA]ED[/PARA] and [PARA]ET[/PARA]in [MML]STR E1T1RTTST[/MML]". [PARA]EWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML]. [PARA]EWSEQ[/PARA] is valide while [PARA]DST[/PARA]=YES and [PARA]EM[/PARA]=WEEK. This parameter must be less than [PARA]BCVOL[/PARA] in [MML]SET BCFCVOLTAGE[/MML] and greater than [PARA]DCVLL[/PARA] in [MML]SET ACDCVLIMIT[/MML]+2, and between 43.2 and 57.6. This parameter is valid only when the value of [PARA]LM[/PARA] is set to IPADDRANDUDPPORT. [PARA]PLRAT[/PARA] should be greater than or equal to [PARA]PLRDT[/PARA].
None
None
NodeB
None
None
NodeB
53.5
53.5 NodeB
None
None
NodeB
10
10 NodeB
8 NodeB
[SET PLRTHRESHOLD] This is the threshold for clearing the packet loss alarm. The value of this command should not exceed the alarm generation threshold. [PARA]PLRDT[/PARA] should be smaller than or equal to [PARA]PLRAT[/PARA]. The value of this parameter must be smaller than or equal to the value of [PARA]KATM[/PARA]. None
750
750 SAAL
None
None
NodeB
None
None
NodeB
None
None
None
NodeB
None This parameter is valid when[PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to IPV4 and [PARA]BRT[/PARA] in [MML]ADD OMCH[/MML] is set to YES.
60 None
OMCH
IPPRECEDENCE None
NodeB
None
None
None
OMCH
The SN of the resource group is required when [PARA]JNRSCGRP[/PARA] in [MML]ADD OMCH[/MML] is set to ENABLE and [PARA]BEAR[/PARA] is set to ATM. This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to IPV4 and [PARA]BRT[/PARA] is set to YES .
IF
None
OMCH
None
None
NodeB
None
None
None
OMCH
This parameter is valid when in [MML]ADD OMCH[/MML] [PARA]BEAR[/PARA] is set to ATM and [PARA]ST[/PARA] is set to RTVBR or NRTVBR.
None
None
SAAL
This parameter is valid when in [MML]ADD SAALLNK[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR.
None
None
NodeB
The value range is 0~7 when [PARA]PRIRULE[/PARA] is IPPRECEDENCE; The value range is 0~63 when [PARA]PRIRULE[/PARA] is DSCP;
None
None
OMCH
This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM.
None
None
NodeB
None
None
None
No
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
None
None
No
None
None
No
None
None
No
None
None
GPS
None
MASTER
None
NodeB
None
FALSE
None
Cell
None For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR. For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR [PARA]HLL[/PARA] is less than [PARA]HUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML] The inner handover radius of the local cell must not be greater than [PARA]RADIUS[/PARA] in[MML]ADD LOCELL[/MML]. None
FALSE(ADD LOCELL)
None
Cell
None
None
No
0(ADD LOCELL)
None
Cell
None
None
NodeB
None
0 NodeB
None
0 None
NodeB
None
40 None
NCMU
None
15 None
NCMU
None
10 None
NCMU
None
5 None
NCMU
None
None
None
No
0 None
NodeB
CBR
None
SAAL
None
127
127 NodeB
This parameter is valid when [PARA]FPMUXSWITCH[/PA RA] in [MML]SET FPMUX[/MML] is set to ENABLE. The difference between [PARA]FRAMELEN[/PARA]( Frame Max Length) and [PARA]SUBFRAMELEN[/PA RA](Sub Frame Max Length) is greater than 4.
NodeB
None
None
MIDDLE
No involved
None
4 NodeB
None This parameter is valid when [PARA]FPMUXSWITCH[/PA RA] in [MML]SET FPMUX[/MML] is set to ENABLE. None
1 NodeB
ENABLE
None
NodeB
None
None
STM1
None
None
None
OMCH
This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM. None This parameter should be set when [PARA]BEAR[/PARA] in [MML]ADD OMCH[/MML] is set to ATM. This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE. This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s.
None
None
NEMU
None
None
OMCH
None
ULCIRx0.5
NodeB
None
None
No
None
None
No
None
None
NodeB
None
NodeB
This parameter is valid only when the [PARA]FUNCTION[/PARA] parameter is set to ENABLE. The value depends on the physical interface rate and must be lower than the physical interface rate. When [PARA]PT[/PARA] is set to MPGRP, the value range is 32 to 155000 kbit/s; when [PARA]PT[/PARA] is set to ETH, the value range is 32 to 155000 kbit/s. If the Ethernet port is an electrical port and [PARA]SPEED[/PARA] in [MML]SET ETHPORT[/MML] is not set to AUTO, this parameter is valid. If the Ethernet port is an optical port, this parameter is set to forced full-duplex. This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON". This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
None
DISABLE
DISABLE
NodeB
None
AUTO
AUTO
NodeB
This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL and [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP"
DISABLE
None
NodeB
None
NOLOOP
NOLOOP
NodeB
None
NOLOOP
NOLOOP
NodeB
None
DISABLE
DISABLE
NodeB
None The value range is 15~30 when [PARA]SWTICH[/PARA] in [MML]SET VSWRALMPARAM[/MML] is set to ATM. LL is less than [PARA]UL[/PARA] in [MML]SET NEMUINVLIMIT[/MML] When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid.
None
None
NodeB
42
42 NodeB
None
None
NodeB
NOLOOP
NOLOOP
NodeB
None
None
None
NodeB
[PARA]LNCODE[/PARA] can be HDB3 or AMI when [PARA]FRAME[/PARA] is E1_DOUBLE_FRAME or E1_CRC4_MULTI_FRAME. [PARA]LNCODE[/PARA] can be B8ZS or AMI when [PARA]FRAME[/PARA] is T1_SUPER_FRAME or T1_EXTENDED_SUPER_F RAME.
None
None
NodeB
It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET NodeB(SET IPREMOTELOOP[/MML]. IPREMOTELOOP) It is valid when E1/T1(SET [PARA]LM[/PARA] is not 1 E1T1LOP) NOLOOP in [MML]SET STM1(SET E1T1LOP[/MML]. STM1LOP) It is valid when [PARA]LM[/PARA] is not NOLOOP in [MML]SET STM1LOP[/MML].
None
None
NodeB
This parameter is valid only when the value of [PARA]LM[/PARA] is set to ONLYIPADDR or IPADDRANDUDPPORT.
ENABLE
ENABLE
NodeB
None
None
None
NodeB
If [PARA]PN[/PARA] = 0, the value can be forced 10Mbps, forced 100Mbps, or autonegotiated. If [PARA]PN[/PARA] = 1, the value can be forced 100Mbps. This parameter is valid when [PARA]MODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL , [PARA]CLKSRC[/PARA] in [MML]SET CLKMODE[/MML] is set to "IP" and [PARA]IPMODE[/PARA] in [MML]SET CLKMODE[/MML] is set to MANUAL This parameter is valid when [PARA]TRAFFIC[/PARA] in [MML]SET VLANCLASS[/MML] is set to USERDATA.
0 NodeB
None
None
NodeB
None
None
NodeB
None
0 None
NodeB
None
None
None
Cell
None
1 None
NodeB
This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE. This parameter is valid when [PARA]INSTAG[/PARA] in [MML]SET VLANCLASS[/MML] is set to ENABLE.
0 None
NodeB
NodeB
None
None
None
Cell
None If it is "ENABLE", the [PARA]LSDV[/PARA] in [MML]SET SDPA[/MML] value is valid. The parameter is valid only when the [PARA]LSDF[/PARA] in [MML]SET SDPA[/MML] is set to Enable. None
DISABLE
None
NodeB
44 None
NodeB
ENABLE
ENABLE
0 None
NCMU
None
65
65 NodeB
-20 None
NodeB
OFF
None
NodeB
None
None
None
NodeB
This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2NODE[/MML] is set to LOCAL.
None
None
NodeB
None
This parameter is valid only when the [PARA]NT[/PARA] parameter in [MML]ADD AAL2PATH[/MML] is set to ADJNODE. It is valid when [PARA]EAGCHPCMOD[/PA RA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML].
None
-60 Cell
None
None
ENABLE
ENABLE
SCTP
None
ATM
None
IUBCP
None
None
Cell
IPV4
IPV4
NodeB
None
None
None
None
NodeB
None
ITC
None
NodeB
None
None
-300 Cell
It is valid when [PARA]EAGCHPCMOD[/PA RA] is CQI_BASED, HSSCCH_BASED in [MML]SET MACEPARA[/MML]. This parameter is valid only when in [MML]ADD IUBCP[/MML] [PARA]CPPT[/PARA] is set to CCP. It is valid when [PARA]AUTOSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML]. MLL is less than [PARA]MUL[/PARA] in [MML]SET NEMUANLGIN[/MML] None
0 None
IUBCP
15 None
NodeB
None
None
NEMU
NCP
None
IUBCP
None
None
NodeB
None
None
None
NodeB
None
MANUAL
MANUAL
NodeB
None
None
None
NodeB
None
None
None
None
25
25 IMA Group
None
None
None
None
None
None
None
None
None
IP Path
None
None
None
NodeB
None
None
NEMU
This parameter value must be greater than [PARA]MLL[/PARA] in [MML]SET NEMUANLGIN[/MML] The [PARA]DSTIP[/PARA] & the [PARA]DSTMASK[/PARA] must be equal to the [PARA]DSTIP[/PARA].
None
None
NodeB
None
None
Cell
For DBS:This parameter is valid only When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR. For BTS:This parameter is valid When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is REMOTE_SECTOR or LOCAL_SECTOR
None
100 Cell
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
0 None
This parameter is valid only when the [PARA]JNRSCGRP[/PARA] parameter in [MML]ADD TREELNKPVC[/MML] is set to ENABLE.
None
None
Timeslot Cross
None
None
None
None
MASTER
MASTER
IUBCP
None
DISABLE
DISABLE
IP Path
This parameter is valid only when the [PARA]PT[/PARA] parameter in [MML]ADD IPPATH[/MML] is set to ETH. The value range is 0~3 when [PARA]SBT[/PARA] is set to BASE_BOARD; The value range is 0~7 when [PARA]SBT[/PARA] is set to E1_COVERBOARD;
0 Fractional ATM
None
FIXED
Cell
NO
None
Cell
None
-136 Cell
None
None
Cell
None
FIXED
Cell
NO
None
Cell
None
-173 Cell
None
105 Cell
270
270 IP Path
This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PA RA] is set to ENABLE. The difference between [PARA]FRAMELEN[/PARA]( Frame Max Length) and [PARA]SUBFRAMELEN[/PA RA](Sub Frame Max Length) is greater than 4.
FRAMEMODE_SD None H
STM1
None
9 None
NCMU
None
16 None
NCMU
None
None
None
NodeB
The parameter is valid when [PARA]AIDST[/PARA] in [MML]SET OBJALMSHLD[/MML]is set to "ONEBYONE". The parameter is valid when [PARA]SN[/PARA] in [MML]SET OBJALMSHLD[/MML]is valid.
None
None
NodeB
None
None
NodeB
None
None
None
NodeB
You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM". Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<O OTHD;UOTHD<OCTHD<OO THD
D128
D128
IMA Group
None
None
None
NodeB
None You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM". Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<O OTHD;UOTHD<OCTHD<OO THD None
None
None
NodeB
DEV
DEV
NodeB
V1.1
V1.1
NodeB
None
NAME
None
NodeB
None
None
None
Cell
None
65 None
NodeB
0 NodeB
This paramter is valid when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF. The value range is 0~7 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~15 when [PARA]PT[/PARA] is PPP and [PARA]SBT[/PARA] is E1_COVERBOARD; The value range is 0~1 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]PT[/PARA] is MPGRP and [PARA]SBT[/PARA] is E1_COVERBOARD; This parameter is valid only when [PARA]RTTYPE[/PARA] in [MML]ADD IPRT[/MML] is set to IF. The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD; This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN.
None
None
NodeB
0 IMA Link
DISABLE
None
NodeB
None
None
NodeB
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
ENABLE
ENABLE
0.0.0.0
None
IP & ~mask cannot be 0 IP & mask cannot be 0 MLPPP Group(ADD IP & mask + ~mask cannot MPGRP) be 0xffffffff PPP Link(ADD IP & ~mask + mask cannot PPPLNK) be 0xffffffff Note: "~mask" indicates the complement on mask.
DISABLE
None
AAL2 Path(ADD AAL2PATH) IP Path(ADD IPPATH) SAAL(ADD SAALLNK) Tree Link PVC(ADD TREELNKPVC) NodeB
None
0 None
None The value range is 0~63 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to ATM.
0 None
IUBCP
0 None
IUBCP
The value range is 0~19 when [PARA]BEAR[/PARA] in [MML]ADD IUBCP[/MML] is set to IPV4. None
0 None
NodeB
0.0.0.0
None
IP & ~mask cannot be 0 IP & mask cannot be 0 MLPPP Group(ADD IP & mask + ~mask cannot MPGRP) be 0xffffffff PPP Link(ADD IP & ~mask + mask cannot PPPLNK) be 0xffffffff Note: "~mask" indicates the complement on mask.
None
None
NodeB
This parameter is valid when [PARA]TP[/PARA] in [MML]ADD RRU[/MML] is set to "BRANCH" None
None
None
NodeB
None
None
SCTP
None
None
None
NodeB
IP & ~mask cannot be 0 IP & mask cannot be 0 IP & mask + ~mask cannot be 0xffffffff IP & ~mask + mask cannot be 0xffffffff Note: "~mask" indicates the complement on mask.
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None Value Range: BTS3900: UPEA/ UPEB:0~7 MRRU:0~6 RHUB:0~3 PRRU:0 NEMU:0~35 BTS3900A: UPEA/UPEB:0~7 MRRU:0~6 RHUB:0~3 PRRU:0 NPMU:5~7 DBS3900: UPEA/UPEB:0~7 MRRU:0~6 RHUB:0~3 PRRU:0 NEMU:0~35 NPMU:5~7
None
None
NodeB
0(ADD LNKSRC) 0(ADD DEVIP) 0(ADD PPPLNK) 0(ADD FRAATM) 0(ADD IPPATH) 0(ADD MPLNK) 0(ADD OMCH) 0(ADD SAALLNK)
None(ADD LNKSRC) None(ADD DEVIP) None(ADD PPPLNK) None(ADD FRAATM) None(ADD IPPATH) None(ADD MPLNK) None(ADD OMCH) None(ADD SAALLNK)
NodeB(ADD LNKSRC) NodeB(ADD DEVIP) PPP Link(ADD PPPLNK) Fractional ATM(ADD FRAATM) IP Path(ADD IPPATH) MLPPP Link(ADD MPLNK) OMCH(ADD OMCH) SAAL(ADD SAALLNK)
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.
None(SET 0(SET E1T1LOP) E1T1LOP) 0(SET None(SET E1T1WORKMOD E1T1WORKMODE) E) None(SET 0(SET ETHPORT) ETHPORT) 0(SET None(SET HSDPAFLOWCTR HSDPAFLOWCTRL LPARA) PARA) 0(SET LR) None(SET LR) 0(SET SCRAM) None(SET SCRAM) None(ADD AAL2PATH) None(ADD IP2RSCGRP) None(ADD RSCGRP)
NodeB(SET E1T1LOP) NodeB(SET E1T1WORKMODE) Ethport(SET ETHPORT) NodeB(SET HSDPAFLOWCTR LPARA) NodeB(SET LR) IMA Group/UNI Link/Fractional ATM(SET SCRAM) AAL2 Path(ADD AAL2PATH) NodeB(ADD IP2RSCGRP) NodeB(ADD RSCGRP)
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.
The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD. The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD. The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD. The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD. The value range is 0~3 when [PARA]SBT[/PARA] is BACK_BOARD.
0 None
OMCH
The value range is 0~3 when [PARA]SBT[/PARA] is NodeB(SET BASE_BOARD. 0(SET None(SET HSDPAFLOWCTR The value range is 0~7 when HSDPAFLOWCTR HSDPAFLOWCTRL LPARA) [PARA]SBT[/PARA] is LPARA) PARA) IMA Group/UNI E1_COVERBOARD. 0(SET SCRAM) None(SET SCRAM) Link/Fractional The value range is 0~3 when ATM(SET SCRAM) [PARA]SBT[/PARA] is BACK_BOARD. Tree Link PVC(ADD 1000 1000 TREELNKPVC) None AAL2 Path(ADD AAL2PATH)
None
None
NodeB
None
ENABLE
ENABLE
MLPPP Group
None
None
None
SAAL
This parameter is valid when [PARA]ST[/PARA] is set to UBR+, and its value should be smaller than the value of [PARA]PCR[/PARA].
None
None
This parameter is valid only when the [PARA]ST[/PARA] is UBR+, and the value of this parameter is smaller than the [PARA]PCR[/PARA] value.
1 IMA Group
The value range is 1~4 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 1~8 when [PARA]SBT[/PARA] is E1_COVERBOARD;
100
The value of this parameter cannot be smaller than that of [PARA]MPDADT[/PARA]. None
None
None
NodeB
None
None
NodeB
None
None
None
NodeB
when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSW[/MML] is set to "custom", the value range is between R0A, R0B and RET_PORT; when the ALD system type [PARA]AST[/PARA] in [MML]SET ALDPWRSWALD[/MML] is set to "RET_ONLY_MULTICORE", the value range is only RET_PORT; otherwise the value range is between R0A and R0B. For the WRFU subrack, the value range is between N0A and N5A, N0B and N5B. For the RRU, if the ALD system type is custom, the value range is between R0A, R0B and RET_PORT, if the ALD system type is RET_ONLY_MULTICORE, the value range is only RET_PORT, otherwise the value range is between R0A and R0B.
None
None
NodeB
None When MODE = CUSTOM, this parameter is valid. If the parameter is not specified, the existing type is not changed. [PARA]PTYPE[/PARA] is valid while [PARA]CS[/PARA]=CONFIG ED in [MML]SET PWRSYSCFG[/MML] None The value of this parameter cannot be greater than that of [PARA]MPDAAT[/PARA].
None
None
NodeB
APM100
None
NodeB
None
None
NodeB
50
50 MLPPP Group
None
None
NodeB
[PARA]PWD[/PARA] is valid while [PARA]PKPEnableSta[/PAR A]=Enable in [MML]SET CERTFILE[/MML]. This parameter is valid only when [PARA]CHRSW[/PARA]=ON in [MML]SET CHRSW[/MML]
None
None
NodeB
None
5 Cell
None
ABSOLUTE
ABSOLUTE
Cell
None
None
NodeB
None
29000(ADD LOCELL)
None
Cell
None
None
None
NodeB
None
The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;
None
None
NodeB
None
None
None
NodeB
None
1500
None
DUAL
None
0 None
NodeB
None
None
None
Cell
None
None
None
NodeB
None
None
Cell
FALSE
None
Cell
RruName
None
NodeB
None
DISABLE
DISABLE
None
None
SYNC(ADD LOCELL)
None
Cell
This parameter is valid noly When the [PARA]SECT[/PARA] in [MML]ADD SEC[/MML] is DIST_SECTOR.
UO
UO
NodeB
None
None
CODE_PRI
Cell
None
None
None
NodeB
None
None
NodeB
None
None
OPEN
Cell
None
None
None
NodeB
This parameter is valid only when [PARA]RSTMODE[/PARA] in [MML]SET CFGFILEENB[/MML] is set to "ENABLE".
None
None
Timeslot Cross
The value range of [PARA]SRCSN[/PARA] is 0~7 when [PARA]NO[/PARA] is 0~7. The value range of [PARA]SRCSN[/PARA] is 0~5 when [PARA]NO[/PARA] is 8~15. None Value Range: BTS3900&BTS3900A: MRRU, RHUB, PRRU , WRFU DBS3900: MRRU, RHUB , PRRU
None
None
None
None
NodeB
None
None
IP Path
None
None
None
NodeB
None The LOCAL node must already exist before the HUB node is added.
None
None
NodeB
PERFFIRST
None
NodeB
None
None
None
AAL2 Path
None
None
None
NodeB
None
0 None
NodeB
None
ON
None
NodeB
None
DISABLE
DISABLE
IP Path
None
None
None
IP Path
None
None
None
AAL2 Path
None When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA]. None This parameter is valid only when [PARA]SBS[/PARA] in [MML]SET SUBBRD[/MML] is set to "YES".
None
None
SAAL
None
None
NodeB
None
None
NodeB
None(ADD LNKSRC) None(ADD DEVIP) -(ADD LNKSRC) None(ADD PPPLNK) -(ADD DEVIP) None(ADD -(ADD PPPLNK) AAL2PATH) -(ADD AAL2PATH) None(ADD FRAATM) -(ADD FRAATM) None(ADD IMAGRP) -(ADD IMAGRP) None(ADD IMALNK) -(ADD IMALNK) None(ADD -(ADD IP2RSCGRP) IP2RSCGRP) None(ADD IPPATH) -(ADD IPPATH) None(ADD IPRT) -(ADD IPRT) None(ADD MPGRP) -(ADD MPGRP) None(ADD MPLNK) -(ADD MPLNK) None(ADD OMCH) -(ADD OMCH) None(ADD -(ADD RSCGRP) RSCGRP) -(ADD SAALLNK) None(ADD -(ADD UNILNK) SAALLNK) -(ADD CFMMEP) None(ADD UNILNK) -(ADD ETHTRK) None(ADD -(ADD CFMMEP) ETHTRKLNK) None(ADD ETHTRK) None(ADD ETHTRKLNK)
NodeB(ADD LNKSRC) NodeB(ADD DEVIP) PPP Link(ADD PPPLNK) AAL2 Path(ADD AAL2PATH) Fractional ATM(ADD FRAATM) IMA Group(ADD IMAGRP) IMA Link(ADD IMALNK) NodeB(ADD IP2RSCGRP) IP Path(ADD IPPATH) NodeB(ADD IPRT) MLPPP Group(ADD MPGRP) MLPPP Link(ADD MPLNK) OMCH(ADD OMCH) NodeB(ADD RSCGRP) SAAL(ADD SAALLNK) UNI Link(ADD UNILNK) ETH OAM(ADD CFMMEP) NodeB(SET E1T1WORKMODE) Ethport(SET ETHPORT) NodeB(SET LR) IMA Group/UNI Link/Fractional ATM(SET SCRAM)
When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD. When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD
When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD. When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD When [PARA]SN[/PARA] is in the range of 0~5, choose E1_COVERBOARD. When [PARA]SN[/PARA] is in range of 6~7, choose BASE_BOARD, BACK_BOARD
None
None
NodeB
None
28 Cell
NO
Cell
None
None
Cell
None When the [PARA]ST[/PARA] parameter in the MML command is set to RTVBR, NRTVBR, or UBR+, the value of this parameter should be greater than that of [PARA]SCR[/PARA] or [PARA]MCR[/PARA].
None
None
None
None
None
SCTP MLPPP Link(ADD MPLNK) PPP Link(ADD PPPLNK) MLPPP Link(ADD MPLNK) PPP Link(ADD PPPLNK)
None
ENABLE
ENABLE
None
0 None
The value range is 0~7 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~15 when [PARA]SBT[/PARA] is E1_COVERBOARD; None
60 None
NodeB
None
None
NodeB
None
None
None
NodeB
[PARA]SDAY[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML]. None
None
None
Battery
None
None
Battery
None
None
None
MLPPP Group(ADD This parameter is mandatory MPGRP) if [PARA]AUTH[/PARA] is PPP Link(ADD not NONAUTH. PPPLNK) Cell For BTS:When the value of [PARA]SECT[/PARA] is LOCAL_SECTOR, It's valua is 0~5. This parameter is valid when the operating mode is SECTOR.
None
None
None
None
NodeB
None
None
AAL2 Path
None
REMOTE_SECTO REMOTE_SECTOR( R(ADD SEC) ADD SEC) Cell -(ADD LOCELL) None(ADD LOCELL)
For BTS, The para LOCAL_SECTOR of [MML]ADD SEC[/MML] is valid and optional, When [PARA]SECT[/PARA] is LOCAL_SECTOR, It's value should be 4 or 5. For DBS, When [PARA]SECT[/PARA] is REMOTE_SECTOR, It's value should be ROA and R0B This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V1.1.
None
None
No
None
None
No
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]OPESORT[/PARA] is set to OPE and [PARA]OPEVER[/PARA] is set to V2.0_3GPP.
None
FIXED
Cell
NO
None
Cell
None
-197 Cell
None
96 Cell
None
FIXED
Cell
NO
None
Cell
None
-210 Cell
None
100 Cell
None
None
NodeB
None This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV .
None
None
No
None
None
NodeB
None
None
None(ADD CMBGROUP)
NodeB
None
None
None
NodeB
None
3000
None It is valid when [PARA]SEHICHPCMOD[/PA RA] is FIXED in [MML]SET MACEPARA[/MML]. None [PARA]SM[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML].
None
None
None
IP Path
None
None
NodeB
None
EPF
Cell
None
None
None
NodeB
[PARA]SMONTH[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or DATE in [MML]SET TZ[/MML].
None
None
NodeB
Cabinet No. Subrack No. Slot No. Board type 0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 0~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit) 0 4 0~5 WRFU (WCDMA Radio Frequency Unit) 0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 11 0 NFAN (NodeB
None(ADD LNKSRC) None(ADD DEVIP) None(ADD PPPLNK) None(ADD AAL2PATH) None(ADD FRAATM) None(ADD IMAGRP) None(ADD IMALNK) None(ADD IP2RSCGRP) None(ADD IPCLKLNK) None(ADD IPPATH) None(ADD IPRT) None(ADD MPGRP) None(ADD MPLNK) None(ADD OMCH) None(ADD RSCGRP) None(ADD SAALLNK) None(ADD SCTPLNK) None(ADD UNILNK) None(ADD None(SET E1T1BEAR) None(SET E1T1LOP) None(SET E1T1WORKMOD E) None(SET ETHPORT) None(SET HSDPAFLOWCTR LPARA) None(SET IPREMOTELOOP) None(SET LR) None(SET SCRAM)
None(ADD LNKSRC) None(ADD DEVIP) None(ADD PPPLNK) None(ADD AAL2PATH) None(ADD FRAATM) None(ADD IMAGRP) None(ADD IMALNK) None(ADD IP2RSCGRP) None(ADD IPCLKLNK) None(ADD IPPATH) None(ADD IPRT) None(ADD MPGRP) None(ADD MPLNK) None(ADD OMCH) None(ADD RSCGRP) None(ADD SAALLNK) None(ADD SCTPLNK) None(ADD UNILNK) None(ADD CFMMA) None(ADD CFMMEP) None(ADD BFDSESSION) None(ADD ETHTRK) None(ADD ETHTRKLNK)
ADD LNKSRC(Optional) ADD DEVIP(Optional) ADD PPPLNK(Optional) ADD AAL2PATH(Option al) ADD FRAATM(Optional) ADD IMAGRP(Optional) ADD IMALNK(Optional) ADD IP2RSCGRP(Optio None nal) ADD IPCLKLNK(Optional ) ADD IPPATH(Optional) ADD IPRT(Optional) ADD MPGRP(Optional) ADD MPLNK(Optional) ADD OMCH(Optional) ADD RSCGRP(Optional) ADD NodeB(SET E1T1BEAR) NodeB(SET E1T1LOP) NodeB(SET E1T1WORKMODE) Ethport(SET ETHPORT) NodeB(SET None HSDPAFLOWCTR LPARA) NodeB(SET IPREMOTELOOP) NodeB(SET LR) IMA Group/UNI Link/Fractional ATM(SET SCRAM)
None(SET E1T1BEAR) None(SET E1T1LOP) None(SET E1T1WORKMODE) None(SET ETHPORT) None(SET HSDPAFLOWCTRL PARA) None(SET IPREMOTELOOP) None(SET LR) None(SET SCRAM)
None
None
Cell
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5. When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 0. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value range is 0~5. This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR None
None
None
Cell
0 Cell
0 Cell
None
None
NodeB
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NEMU
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE".
None
None
NEMU
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT".
None
None
NEMU
The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "VOLTAGE". This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML]. The parameter is valid only when the [PARA]TYPE[/PARA] in [MML]SET NEMUANLGIN[/MML] is set to "CURRENT"; This parameter value must be greater than [PARA]SOLL[/PARA] in [MML]SET NEMUANLGIN[/MML]. This parameter is valid only when [PARA]SW[/PARA] in [MML]SET SNTPCLTPARA[/MML] is set to "ON".
None
None
NEMU
None
None
NodeB
0 None
AAL2 Path(ADD AAL2PATH) NodeB(ADD IP2RSCGRP) NodeB(ADD IPPATH) NodeB(ADD RSCGRP) SAAL(ADD SAALLNK)
This parameter is valid only when the [PARA]JNRSCGRP[/PARA] in the MML command is ENABLE.
None
None
Cell
This parameter is valid noly When the [PARA]HISPM[/PARA] in [MML]ADD LOCELL[/MML] is TRUE.
None
None
No involved
None
0 None
NodeB
The value range is 0~1 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]SRCPT[/PARA] is IMA and [PARA]SRCSBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]SRCPT[/PARA] is UNI and [PARA]SRCSBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]SRCPT[/PARA] is FRAATM and [PARA]SRCSBT[/PARA] is E1_COVERBOARD; The value range is 0~3 when [PARA]SRCSBT[/PARA] is BASE_BOARD; The value range is 0~7 when [PARA]SRCSBT[/PARA] is E1_COVERBOARD;
0 None
NodeB
None
None
NodeB
None
None
NodeB
None
ENABLE
None
STM1
This parameter is valid when the [PARA]SBT[/PARA] parameter is CHANNELLED_COVERBO ARD and [PARA]SW[/PARA] is set to ENABLE in [MML]SET SDHJ0J1J2[/MML]. Only ENABLE is valid when [PARA]TB[/PARA] is J2. When the value range of [PARA]SRCSN[/PARA] is 6~7, [PARA]SRCSBT[/PARA] is BASE_BOARD. When the value range of [PARA]SRCSN[/PARA] is 0~5, [PARA]SRCSBT[/PARA] is E1_COVERBOARD. None The value range is 0~7 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 0~7; The value range is 0~5 when the value range of [PARA]NO[/PARA] in [MML]ADD TSCROSS[/MML] is 8~15; The [PARA]SRCSN[/PARA] and [PARA]DSTSN[/PARA] should be different. None When SBT is BASE_BOARD, choose NEXTHOP or IF When SBT is E1_COVERBOARD, choose IF
None(ADD -(ADD TREELNKPVC) TREELNKPVC) None(ADD -(ADD TSCROSS) TSCROSS) None(ADD -(ADD TREELNKPVC) TREELNKPVC) None(ADD -(ADD TSCROSS) TSCROSS) None None
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
None
None
None
None
None
IP Path
The value range is 8~100000 when [PARA]PT[/PARA] is ETH; The value range is 8~1984 when [PARA]PT[/PARA] is PPP; The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP; It is valid when [PARA]SEHICHPCMOD[/PA RA] is RNC_BASED, FOLLOW_TPC in [MML]SET MACEPARA[/MML]. The value and relation of Cabinet No., Subrack No.and Slot No.: Cabinet No. Subrack No. Slot No. Board type 0 0 0~3 WBBPa (WCDMA BaseBand Process unit type A) \WBBPb (WCDMA BaseBand Process unit type B) \UTRP (Universal extension TRansmission Processing unit) 0 0 4~5 UTRP (Universal extension TRansmission Processing unit) 0 0 6~7 WMPT (WCDMA Main Processing & Transmission unit) 0 0 16 UBF (Universal BBU Fan unit) 0 0 18~19 UPEA(Universal Power and Environment interface unit type A(-48V)) \UPEB(Universal Power and Environment interface unit type B(24V)) \UEIU(Universal Environment Interface Unit) 0 6 0 NEMU (NodeB Environment Monitoring Unit) 0 7 0 NPMU (NodeB Power Monitoring Unit) 0 8 0~1 NCMU (NodeB Climate Monitoring Unit)
None
88 Cell
MASTER(ADD SUBRACK) None(ADD CABINET) MASTER(BLK BRD) MASTER(SET SASUVSWRTHD) MASTER(SET RTWPINITADJ) MASTER(SET TXSW) MASTER(SET IFOFFSET) MASTER(SET RXATTEN) MASTER(SET RFDESPARAM) MASTER(SET VSWRALMPARA M) MASTER(STR VSWRTEST) MASTER(SET RXSW) MASTER(STR CLKTST) MASTER(STR RRULNKTST) MASTER(STR BATTST) MASTER(SET HTPROTECT) MASTER(SET
MASTER(ADD SUBRACK) None(ADD CABINET) MASTER(BLK BRD) MASTER(SET SASUVSWRTHD) MASTER(SET RTWPINITADJ) MASTER(SET TXSW) MASTER(SET IFOFFSET) MASTER(SET RXATTEN) MASTER(SET RFDESPARAM) NodeB MASTER(SET VSWRALMPARAM) MASTER(STR VSWRTEST) MASTER(SET RXSW) MASTER(STR CLKTST) MASTER(STR RRULNKTST) MASTER(STR BATTST) MASTER(SET HTPROTECT) MASTER(SET BCFCVOLTAGE) MASTER(STR
-(ADD LNKSRC) -(ADD DEVIP) -(ADD PPPLNK) -(ADD AAL2PATH) -(ADD FRAATM) -(ADD IMAGRP) -(ADD IMALNK) -(ADD IP2RSCGRP) -(ADD IPCLKLNK) -(ADD IPPATH) -(ADD IPRT) -(ADD MPGRP) -(ADD MPLNK) -(ADD OMCH) -(ADD RSCGRP) -(ADD SAALLNK) -(ADD SCTPLNK) -(ADD TREELNKPVC) -(ADD TSCROSS) -(ADD UNILNK) -(ADD CFMMA) -(ADD CFMMEP) -(ADD BFDSESSION) -(ADD ETHTRK) -(ADD ETHTRKLNK)
None(ADD LNKSRC) None(ADD DEVIP) None(ADD PPPLNK) None(ADD AAL2PATH) None(ADD FRAATM) None(ADD IMAGRP) None(ADD IMALNK) None(ADD IP2RSCGRP) None(ADD IPCLKLNK) None(ADD IPPATH) None(ADD IPRT) None(ADD MPGRP) None(ADD MPLNK) None(ADD OMCH) None(ADD RSCGRP) None(ADD SAALLNK) None(ADD SCTPLNK) None(ADD TREELNKPVC) None(ADD TSCROSS) None(ADD UNILNK) None(ADD CFMMA) None(ADD CFMMEP) None(ADD BFDSESSION) None(ADD ETHTRK) None(SET E1T1BEAR) None(SET E1T1LOP) None(SET E1T1WORKMODE) None(SET ETHPORT) None(SET HSDPAFLOWCTRL PARA) None(SET IPREMOTELOOP) None(SET LR) None(SET SCRAM)
NodeB(ADD LNKSRC) NodeB(ADD DEVIP) PPP Link(ADD PPPLNK) AAL2 Path(ADD AAL2PATH) Fractional ATM(ADD FRAATM) IMA Group(ADD IMAGRP) IMA Link(ADD IMALNK) NodeB(ADD IP2RSCGRP) None NodeB(ADD IPCLKLNK) IP Path(ADD IPPATH) NodeB(ADD IPRT) MLPPP Group(ADD MPGRP) MLPPP Link(ADD MPLNK) OMCH(ADD OMCH) NodeB(ADD RSCGRP) SAAL(ADD SAALLNK) SCTP(ADD SCTPLNK) NodeB(SET E1T1BEAR) NodeB(SET E1T1LOP) NodeB(SET E1T1WORKMODE) Ethport(SET ETHPORT) NodeB(SET None HSDPAFLOWCTR LPARA) NodeB(SET IPREMOTELOOP) NodeB(SET LR) IMA Group/UNI Link/Fractional ATM(SET SCRAM)
None(SET E1T1BEAR) None(SET E1T1LOP) None(SET E1T1WORKMOD E) None(SET ETHPORT) None(SET HSDPAFLOWCTR LPARA) None(SET IPREMOTELOOP) None(SET LR) None(SET SCRAM)
None
None
Cell
When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5. When [PARA]SECT[/PARA] is set to REMOTE_SECTOR, the value range is 20~254. When [PARA]SECT[/PARA] is LOCAL_SECTOR, the value of this para is 4~5. This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR This para is valid, when [PARA]SECT[/PARA] is DIST_SECTOR None
None
None
Cell
None
None
Cell
None
None
Cell
0 NodeB
0 NodeB
None
0 NodeB
None
0 NodeB
None
0 NodeB
None
0 NodeB
None
0 NodeB
None
0 NodeB
None
None
None
NodeB
None
None
None
STM1
This parameter is valid when the [PARA]RSW[/PARA] is ENABLE. When [PARA]TB[/PARA] is J0: TRACE_1BYTE and TRACE_16BYTE and TRACE_64BYTE is valid. When [PARA]TB[/PARA] is J1: TRACE_16BYTE and TRACE_64BYTE is valid. When [PARA]TB[/PARA] is J2: TRACE_16BYTE is valid. This parameter is valid when the [PARA]RSW[/PARA] is ENABLE. It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9. When [PARA]RXT[/PARA] is TRACE_1BYTE, it should be an integer(0~255). When [PARA]RXT[/PARA] is TRACE_16BYTE, it should be a string which length is not more than 15. When [PARA]RXT[/PARA] is TRACE_64BYTE, it should be a string which length is not more than 62.
None
None
STM1
EARLIER_VER
None
STM1
0 None
SAAL
None This parameter is valid when in [MML]ADD TREELNKPVC[/MML] [PARA]ST[/PARA] is set to RTVBR or NRTVBR, and its value should be less than the [PARA]PCR[/PARA].
None
None
None
None
NodeB
[PARA]ST[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML]. None This parameter is valid only when [PARA]ST[/PARA] in [MML]ADD AAL2PATH[/MML] is set to RTVBR or NRTVBR, and the value of this parameter should be smaller than the [PARA]PCR[/PARA] value.
None
None
NodeB
None
None
AAL2 Path
None
None
NodeB
None
None
None
NodeB
None
None
NodeB
None
ENABLE
ENABLE
For the UNI link on the baseboard, the scrambling mode must be enabled when the line code of AMI is used by the E1/T1 link. If the line code of AMI is used by an IMA link of the IMA group, the scrambling mode of the IMA group must be enabled. None This parameter is invalid when [PARA]DEVTP[/PARA] in [MML]ADD ALD[/MML] is set to "SINGLE_RET"
0 None
SCTP
None
None
NodeB
None
None
NodeB
None
0.0.0.0
None
SCTP
None
None
None
NodeB
[PARA]SWEEK[/PARA] is valid while [PARA]DST[/PARA]=YES and [PARA]SM[/PARA] is DATEWEEK or WEEK in [MML]SET TZ[/MML].
0.0.0.0
None
SCTP
None
None
None
NodeB
None
None
None
Cell
None
None
NodeB
None
None
NodeB
None
80
80 NodeB
None This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING" This parameter is valid only when [PARA]JNRSCGRP[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to ENABLE. The TDSTM is valid only when [PARA]ATMODE[/PARA] in [MML]SET BATATPA[/MML] is set to PERIOD or PERIODPOWERCUT.The DDSTM value must be smaller than TDSTM value.
MASTER
None
NodeB
0 None
120 None
Battery
None
None
NodeB
None
None
None
No
This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to OPE and [PARA]DEVVER[/PARA] is set to V1.1. This parameter is valid when in [MML]SET ALDDEV[/MML] [PARA]DEVVER[/PARA] is set to DEV and [PARA]DEVVER[/PARA] is set to V2.0_3GPP.
None
None
No
None
None
Timeslot Cross
None
None
[ADD TSCROSS] When the source or destination port of the timeslot cross connection is carried at the WMPT, TscrossNo ranges from 0 to 7. When the source or destination ports of the timeslot cross connection are carried at the UAEC, TscrossNo ranges from 0 to 15. The source E1/T1 link over which timeslot cross connection is configured cannot carry the IMA/UNI/FRAATM link or the PPP/MP link. For a timeslot cross connection, the source and destination timeslots can be different timeslots at different boards. The number of source timeslots, however, must be equal to that of the destination timeslots. If the sub-board type is BASE_BOARD, only eight timeslot cross connections are supported. The number of [PARA]DSTTSN[/PARA] and [PARA]SRCTSN[/PARA] timeslots must be equal. This parameter is valid only when [PARA]VST[/PARA] in [MML]ADD TREELNKPVC[/MML] is set to VC_SWITCH. None [PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML]
None
None
None
None
No
45 None
NCMU
None
None
None
NodeB
It is valid when [PARA]MANUALSW[/PARA] is ON in [MML]SET EMGLICENSE[/MML]. [PARA]TO[/PARA] is valid while [PARA]DST[/PARA]=YES in [MML]SET TZ[/MML]. None This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING"
None
None
NodeB
None
None
NodeB
None
None
NodeB
RTVBR
None
None
RTVBR
None
AAL2 Path
None
0 None
STM1
The value is 0 when [PARA]SBT[/PARA] is CHANNELLED_COVERBO ARD; The value range is 0~1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVER BOARD; This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING" This parameter is valid only when [PARA]TT[/PARA] in [MML]ADD RRUCHAIN[/MML] is set to "RING" None [PARA]TLL[/PARA] is less than [PARA]TUL[/PARA] in[MML]MOD NEMUTHLIMIT[/MML] This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PA RA] is set to ENABLE. The difference between [PARA]FRAMELEN[/PARA]( Frame Max Length) and [PARA]SUBFRAMELEN[/PA RA](Sub Frame Max Length) is greater than 4. Only ENABLE is valid when [PARA]TB[/PARA] is J2.
None
None
NodeB
0 NodeB
None
None
NodeB
None
None
No
127
127 IP Path
ENABLE
None
STM1
J0
None
STM1
The value range is J0~J2 when [PARA]SBT[/PARA] is CHANNELLED_COVERBO ARD; The value range is J0~J1 when [PARA]SBT[/PARA] is UNCHANNELLED_COVER BOARD; This parameter is valid only when in [MML]ADD IPPATH[/MML] the value of [PARA]PT[/PARA] is set to ETH and [PARA]FPMUXSWITCH[/PA RA] is set to ENABLE.
1 IP Path
DISABLE
None
None
None
None
None
NodeB
None
None
None
None
None
None
IP Path
The value range is 8~100000 when [PARA]PT[/PARA] is ETH. The value range is 8~1984 when [PARA]PT[/PARA] is PPP. The value range is 8~31744 when [PARA]PT[/PARA] is MPGRP.
None
None
NodeB
None
None
None
NEMU
None You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM". Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<O OTHD;UOTHD<OCTHD<OO THD UL is more than [PARA]LL[/PARA] in [MML]SET NEMUINVLIMIT[/MML]
None
None
NodeB
57
57 NodeB
None
None
NodeB
When [PARA]PT[/PARA] in [MML]SET ALMPORT[/MML] is VALUE, this parameter is valid. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B. For DBS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B. For BTS:It is valid when [PARA]ANT1N[/PARA] in [MML]ADD SEC[/MML] is R0A, R0B, N0A, N0B, N1A, N1B, N2A, N2B, N3A, N3B, N4A, N4B, N5A, N5B.
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
100(ADD SEC)
100(ADD SEC)
Cell
None
None
Cell
None
None
None
NodeB
None
0 None
Cell
None
None
None
IP Path
None
None
None
IP Path
None You must enter the parameter when the ALD system type [PARA]AST[/PARA]in [MML]SET ALDPWRSW[/MML] is set to "CUSTOM". Alarm Clear Threshold must be satisfied:UOTHD<UCTHD<O OTHD;UOTHD<OCTHD<OO THD None
None
None
NodeB
None
None
Cell
None
None
NodeB
None
None
None
STM1
This parameter is valid when [PARA]SW[/PARA] is ENABLE When [PARA]SBT[/PARA] is UNCHANNELLED_COVER BOARD, only TRACE_64BYTE is valid. When [PARA]SBT[/PARA] is CHANNELLED_COVERBO ARD: For [PARA]TB[/PARA]=J0, TRACE_1BYTE , TRACE_16BYTE and TRACE_64BYTE are valid. For [PARA]TB[/PARA]=J1, TRACE_16BYTE and TRACE_64BYTE are valid. For [PARA]TB[/PARA]=J2, TRACE_16BYTE is valid.
None
None
STM1
This parameter is valid when [PARA]SW[/PARA] is ENABLE. It should be A integer(0~255) or a string consist of single space, A-Z, a-z, 0-9. When [PARA]TXT[/PARA]=TRACE _1BYTE, it should be an integer(0~255). When [PARA]TXT[/PARA]=TRACE _16BYTE, it should be a string which length is not more than 15. When [PARA]TXT[/PARA]=TRACE _64BYTE, it should be a string which length is not more than 62. None
None
None
NodeB
EARLIER_VER
None
STM1
None
None
MLPPP Group(ADD This parameter is mandatory MPGRP) if [PARA]AUTH[/PARA] is PPP Link(ADD not NONAUTH. PPPLNK) The value range is 0~3 when [PARA]SBT[/PARA] is BASE_BOARD. The value range is 0~7 when [PARA]SBT[/PARA] is E1_COVERBOARD.
0 None
UNI Link
None
None
None
V1.1
V1.1
None
0 None
NodeB
[SET VLANCLASS] A parameter is added. Only eight different VLAN IDs are allowed. This parameter is valid only when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN. This parameter is valid when in [MML]ADD VLANMAP[/MML] [PARA]VLANMODE[/PARA] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] is set to ENABLE.
1 None
NodeB
None
None
NodeB
None
0 None
NodeB
This parameter is valid when [PARA]VLANMODE[/PARA] in [MML]ADD VLANMAP[/MML] is set to SINGLEVLAN and [PARA]INSTAG[/PARA] in [MML]ADD VLANMAP[/MML] is set to ENABLE.
None
None
None
None
None
None
0 None
NodeB
None
DEM_2_CHAN
DEM_2_CHAN
NodeB
When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_2_CHAN, There will be 1 or 2 antena; When the para [PARA]WM[PARA] of [MML]SET DEMODE[/MML] is DEM_4_CHAN or DEM_ECON_4_CHAN, There will be 1 or 2 or 4 antenas;
None
None
NodeB
None
0 None
RRU
None This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON.
0 None
RRU
None
None
RRU
None
None
RRU
5s
None
RRU
This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON. This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON. This parameter is valid when [PARA]SD[/PARA] in [MML]SET RXINTDETSW[/MML] is set to ON. None This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 1~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 2~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8.
None
None
RRU
None
None
RRU
0xFF
None
RRU
0 None
RRU
0 None
RRU
1 None
RRU
0 None
RRU
2 None
RRU
0 None
RRU
This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 3~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 4~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 5~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 6~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 7~8. This parameter is valid when [PARA]NMCA[/PARA] in [MML]SET RXINTDETSW[/MML] is set to 8.
3 None
RRU
0 None
RRU
0 None
RRU
1 None
RRU
1 None
RRU
1 None
RRU
2 None
RRU
1 None
RRU
3 None
RRU
1 None
RRU
kbps
kbps
NodeB
HW_DEFINED
HW_DEFINED
NodeB
None This parameter is valid when [PARA]ICPT[/PARA] in [MML]ADD IPCLKLNK[/MML] is set to PTP. None
0 None
NodeB
MASTER
MASTER
NodeB
None
None
ETH OAM
None
0 None
ETH OAM
None
None
None
ETH OAM
None
None
None
ETH OAM
None
None
None
NodeB
None
None
None
ETH OAM
None
None
None
ETH OAM
None
None
None
ETH OAM
None
None
None
ETH OAM
None
ETH
None
ETH OAM
When [PARA]SBT[/PARA] is BASE_BOARD, choose ETH(ETH); When [PARA]SBT[/PARA] is ETH_COVERBOARD, choose ETH(ETH), ETHTRK(ETHTRK); The value range is 0~3 when [PARA]PT[/PARA] is ETH. The value range is 0~1 when [PARA]PT[/PARA] is ETHTRK. None
None
None
ETH OAM
None
None
NodeB
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
10
10 NodeB
None
10
10 NodeB
None
3 None
NodeB
None
0 None
NodeB
None
DISABLE
None
NodeB
None
DISABLE
None
NodeB
None
100 None
NodeB
None
0 None
NodeB
None
None
None
NodeB
None
None
2 Cell
None
None
4 Cell
None
None
CQI
Cell
None
None
CQI
Cell
None
None
10 Cell
This parameter is valid when [PARA]HSSCCHPWRCTRL METHODINDCH[/PARA] in [MML]SET MACHSPARA[/MML] is set to CQI
None
NO_CQI_ADJ
Cell
None
None
NO_CQI_ADJ
Cell
None
None
7 Cell
This parameter is valid when [PARA]CQIADJALGOFCON[ /PARA] in [MML]SET MACHSPARA[/MML] is set to CQI_ADJ_BY_RBLER
None
OPEN
Cell
None
None
OPEN
Cell
None
None
None
Cell
None
None
None
Cell
None
50
50 Cell
None
10
10 Cell
None
None
None
Cell
None
INHBOARD
INHBOARD
CELL
None
GEN_POOL
INHBOARD
CELL
None
ENABLE
None
NodeB
None
0 None
RRU
None
0 None
RRU
None
None
None
RRU
None
None
RRU
5s
None
RRU
None
None
RRU
None
None
RRU
The parameter is valid when the detect switch is set to ON. The parameter is valid when the detect switch is set to ON. The parameter is valid when the detect switch is set to ON. None The parameter is valid when NMCA is set to 1~8. The parameter is valid when NMCA is set to 1~8. The parameter is valid when NMCA is set to 2~8. The parameter is valid when NMCA is set to 2~8. The parameter is valid when NMCA is set to 3~8. The parameter is valid when NMCA is set to 3~8. The parameter is valid when NMCA is set to 4~8. The parameter is valid when NMCA is set to 4~8. The parameter is valid when NMCA is set to 5~8. The parameter is valid when NMCA is set to 5~8. The parameter is valid when NMCA is set to 6~8.
0xFF
None
RRU
0 None
RRU
0 None
RRU
1 None
RRU
0 None
RRU
2 None
RRU
0 None
RRU
3 None
RRU
0 None
RRU
0 None
RRU
1 None
RRU
1 None
RRU
1 None
RRU
The parameter is valid when NMCA is set to 6~8. The parameter is valid when NMCA is set to 7~8. The parameter is valid when NMCA is set to 7~8. The parameter is valid when NMCA is set to 8. The parameter is valid when NMCA is set to 8.
2 None
RRU
1 None
RRU
3 None
RRU
1 None
RRU
IMA
IMA
When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM); When [PARA]SBT[/PARA] is CHANNELLED_COVERBO ARD, choose IMA (IMAGRP) or UNI (UNILNK); When [PARA]SBT[/PARA] is UNCHANNELLED_COVER BARD, choose STM1 (Unchannelled STM1); When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).
None
None
NodeB(ADD DEVIP) NodeB(ADD IP2RSCGRP) IP Path(ADD IPPATH) OMCH(ADD OMCH) NodeB(ADD RSCGRP)
None
None
None
NodeB(ADD DEVIP) NodeB(ADD IP2RSCGRP) IP Path(ADD IPPATH) OMCH(ADD OMCH) NodeB(ADD RSCGRP)
None
None
None
NodeB(ADD LNKSRC) NodeB(ADD DEVIP) PPP Link(ADD PPPLNK) Fractional ATM(ADD FRAATM) IP Path(ADD IPPATH) MLPPP Link(ADD MPLNK) OMCH(ADD OMCH) SAAL(ADD SAALLNK)
None
None
None
NodeB(ADD DEVIP) NodeB(ADD IP2RSCGRP) IP Path(ADD IPPATH) OMCH(ADD OMCH) NodeB(ADD RSCGRP)
When [PARA]SBT[/PARA] is BASE_BOARD, choose IMA (IMAGRP), UNI (UNILNK), or FRAATM (FRAATM); When [PARA]SBT[/PARA] is CHANNELLED_COVERBO ARD, choose IMA (IMAGRP) or UNI (UNILNK); When [PARA]SBT[/PARA] is UNCHANNELLED_COVER BARD, choose STM1 (Unchannelled STM1); When [PARA]SBT[/PARA] is E1_COVERBOARD, choose IMA (IMAGRP), UNI (UNILNK).
None
None
None
E1_COVERBOAR E1_COVERBOARD D
The value range is 0~1 when [PARA]SBT[/PARA] is BASE_BOARD; The value range is 0~3 when [PARA]SBT[/PARA] is E1_COVERBOARD;
10
MLPPP Group(ADD MPGRP) PPP Link(ADD 10 None PPPLNK) PPPoE Link(ADD PPPOELNK) MLPPP Group(ADD MPGRP) PPP Link(ADD 8 None PPPLNK) PPPoE Link(ADD PPPOELNK) MLPPP Group(ADD MPGRP) None MLPPP Link(ADD MPLNK) MLPPP Link(ADD MPLNK) MLPPP Link(ADD MPLNK) MLPPP Link(ADD MPLNK)
E1_COVERBOAR E1_COVERBOARD D
None
None
None
None
None
None
None
None
None
None
None
CRC_16
CRC_16
None
None
None
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
10 None
NodeB
None
95 None
NodeB
None
2 None
NodeB
None
1 None
NodeB
None
None
None
NodeB
None
None
None
NodeB
None
Access
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved Not involved Not involved Not involved Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Port
Not involved
Not involved
Not involved
Not involved
Port
Port
Port
Not involved
Not involved
Not involved
Port
Port
Not involved
Not involved
Port
Port
Port
NodeB
NodeB
Not involved
Not involved
Not involved
Not involved
Port
Port
Port
Port
Port
Port
Port
Not involved
Not involved
Port
Port
Port
Not involved
Not involved
Port
Port
Port
Not involved
NodeB
NodeB
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
Not involved
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
NodeB
NodeB
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
No involved
No involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Read Only
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved The parameter modification has no impact on the equipment. Not involved
No involved
Not involved
Interruption Duration(Min)
Caution To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs maximum resource limit ratio parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. To modify the Mac-hs resource Limit scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. The ARP proxy needs to be enabled when the local IP address of the OM channel is in the same subnet as the IP address of the Ethernet port on the board of the same slot.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.
Not involved
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 110 V AC power is supplied to the NPMU. Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
After the NodeB is started, the time delay for starting BOOTP is set to 15 min by default, during which if the OM channel returns to normal, the time delay for starting BOOTP will be set to "BootpTime" in this command and the default value is 500000 min. If the time delay for starting BOOTP is set to 15 min, after the OM channel is in abnormal status for 15 min, and the NCP is also abnormal, BOOTP will be started. Every time the OM channel is found in normal state, the time delay for starting BOOTP will be set to BootpTime in this command. If you set the BootpTime to a relatively short period of time to trigger a BOOTP start, then it is recommended that you set the BootpTime to the default value 500000 min when the OM channel returns to normal. In this way, the BOOTP mistriggering caused by transmission intermittent can be prevented. The parameter modification has no impact on the equipment.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report. When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report. After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Reducing the Bit Error Rate (BER) threshold of the NodeB lowers the upper limit of the BER alarm threshold.
Not involved
Not involved
The configuration takes effect immediately after the parameter is modified. This command is valid only for the NEMU manufactured by Huawei.
Not involved
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
When no TMA is used, the attenuation value is set to 0. When the 12 dB TMA is used, the attenuation value is set between 4 dB to 11 dB. When the 24 dB TMA is used, the attenuation value is set between 11 dB and 22 dB.
Not involved
Not involved
This command can be run only by the network administrator. After the command is sent, the NE uses a corresponding authentication mode at the next SSL connection. This command does not affect the existing connections. When the identity is authenticated, the NE must be configured with the root certificate, public key certificate, and private key certificate. If any of the certificates is not configured, a message is displayed, reporting that a certificate is not configured. The parameter modification has no impact on the equipment. When multiple NodeBs are cascaded, a lower-level node is connected to an upper-level one through E1/T1 cables and extracts the clock from the E1/T1 cables. Therefore, the clock mode of the upper-level node must be set as master and that of the lower level node must be set as slave. The configuration takes effect immediately after the parameter is modified. This command is valid only for the NEMU manufactured by Huawei. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
APM100:Battery Capacity(AH):100;Battery Current Limiting Coefficient:0.15 APM200:Battery The parameter modification has no Capacity(AH):200;Battery Current impact on the equipment. Limiting Coefficient:0.15 APM30: Battery Capacity(AH):36; Battery Current Limiting Coefficient:0.07
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
The value must be larger than the value of the FCVOL and between 43.2 and 57.6.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The link is regarded as not congested when the discard rate is lower than or equal to this threshold, and thus the congestion judgement may be influenced by [PARA]DR[/PARA].
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The backup mode of the chain or ring decides whether the CPRI hot redundancy is supported by the equipment on the chain or ring. Currently only the MRRU supports the CPRI hot redundancy. In this case, the backup mode should be set as hot redundancy. The parameter modification has no impact on the equipment. If this switch is not enabled, the added SLAVE CP channel will not take effect. If you disable this switch when the NodeB is using the SLAVE CP channel, the NodeB does not switch to the MASTER CP when the MASTER CP is restored. This switch should be consistent with that of the RNC to ensure communication. For an RRU chain, only one break point can be set and the chain can be divided into two parts: Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected. Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU. For an RRU ring, two break points can be set and the ring can be divided into three parts: Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected. Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected.
Not involved
Not involved
Not involved
Not involved
For an RRU chain, only one break point can be set and the chain can be divided into two parts: Part one consists of the RRUs between the chain head and the break point position. The services of the RRUs in this part are not affected. Part two consists of the RRUs between the break point position and the chain tail. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. You can run the DSP RRUCHAINSTATE command to query the attributes of the CPRI interfaces of the RRU. For an RRU ring, two break points can be set and the ring can be divided into three parts: Part one consists of the RRUs between the ring head and the first break point position. The services of the RRUs in this part may be affected. Part two consists of the RRUs between the break point positions. The RRUs in this part are isolated, and the services are disrupted. You can rectify the fault through the RMV RRUCHAINBRKPOS command. Part three consists of the RRUs between the second break point position and the ring tail. The services of the RRUs in this part may be affected. To enable the DHCP Relay function, you need to run [MML]ADD DHCPSVRIP[/MML] to add the DHCP Server IP address, and you may need to run [MML]ADD IPRT[/MML] to add related routes to ensure the current NodeB can communicate with this IP address.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The gain range supported by the SASU varies with models and vendors. It is recommended that you list the gain range supported by the SASU by running the DSP SASUFUN command before setting the gain.
Not involved
Not involved
Not involved
Not involved
Not involved
For the E1 lines, the 75-ohm and 120ohm modes are supported; for the T1 lines, only the 100-ohm mode is supported. After you modify the line impedance by running this command, you must reset the Iub interface board manually to make your modification valid.
Not involved
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in freerun mode. The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source. Ensure that the clock source is available before running the command. If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully. The command cannot be run when the clock quality test is being performed. If the system responds with a "Clock source is unavailable" message after you run the command, do as follows: For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command. For the GPS card clock source, check whether the GPS is configured through The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved Not involved Not involved Not involved Not involved
This parameter cannot be modified. This parameter can not be modified. This parameter cannot be modified. This parameter can not be modified. This parameter cannot be modified.
Not involved
This parameter cannot be modified. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
The parameter modification has no impact on the equipment. An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Modifying battery installation time will clear all the saved battery test results of The parameter modification has no NPMU. The NPMU restarts saving impact on the equipment. battery test result. Not involved The parameter modification has no impact on the equipment.
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
Not involved
Not involved
The DC load is used to simulate a TMA in the BS system. In some situations, when a high gain is set on the BS RX path through the WCDMA NodeB, the SASU should notify the BS BTS that a TMA is connected to the antenna system. It is preferable to install a DC load to the BS BTS. In this way, the BS BTS can be notified about the TMA on the antenna system when the DC current on the antenna system is detected. The BS DC load cannot be enabled if the DC power switch state of the SASU is set to BS power supply mode.
Not involved
The BS DC load will be automatically changed to 7 after the antenna DC power switch state is set to BS power supply mode. The antenna DC power switch state of the SASU is only set on the main antenna port. If you set the switch state not on the main antenna port, it responds with a Not Supported message. This setting is effective in both subunits of the SASU simultaneously.
Not involved
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.
Not involved
Before setting the AC voltage alarm threshold value, make sure whether the 220 V AC or 111 V AC power is supplied to the NPMU.
Not involved
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. This parameter cannot be modified.
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.
Not involved
Not involved
After this parameter is set, the receiver sensibility will be reduced. Adjust the receiver sensibility according to network planning and optimization.
Not involved
Not involved
Modifying delay may affect normal access of a cell; The heavier the load in the cell is, the more obvious the impact is.
Not involved
Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.
Not involved
Modifying delay may affect normal access services of a cell; The heavier the load in the cell is, the more obvious the impact is.
Not involved
Modifying delay may affect normal access services of a cell; the heavier the load in the cell is, the more obvious the impact is.
Not involved
This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz); If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz). This parameter cannot be modified. When the logical cell does not exist, you can modify the downlink resource group; if the downlink resource group does not exist or the downlink resource group is not the subset of the uplink resource group, the execution of the command fails.
Not involved
Not involved
Not involved
The parameter cannot be equal to [PARA]PEERIP[/PARA]. It is not displayed when the value of [PARA]LM[/PARA] is set to ALL or NOLOOP.
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The IP address takes effect immediately after it is configured. For local maintenance, this command might cause the interruption of the maintenance channel. The IP address and the subnet mask must be valid. Any one of the IP addresses of the local maintenance channel, Ethernet port, and Operation and Maintenance (OM) IP address must be unique. The IP addresses of the FE port, local maintenance channel, and remote maintenance channel must be in different network segments and are free from the inclusion relation. The Alarm Report Synchronization will be affected when the parameter is modified. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. After you modify the E1/T1 bearing mode of the Iub interface board by running this command, you must reset the board manually to make your modification valid. The parameter can be modified only when the board supports this bearing mode.
Not involved
Not involved
Not involved
Not involved
If the value of [PARA]OMPRI[/PARA] is larger than that of the other sevices, the OM channel will use the bandwidth of the other sevices on the same physical port. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode. If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text. After this command is run successfully, the settings take effect in the next FTP operation.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The value must be greater than the value of the DCVLL plus two and less than that of the BCVOL.
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. You can successfully enable or disable the backup function of the WMPT through this command if this function is previously enabled or disabled. The WMPT backup flag in the initial data configuration file is ENABLE. The modified WMPT backup flag is stored in the data configuration file. Therefore, the flag is still valid after the NodeB is restarted.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource group after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is IPV4, the bandwidth of the transmission resource group after modification should not be smaller than the bandwidth of IPPATH added to the transmission resource group.
Not involved
Not involved
Not involved
If the value of [PARA]SIGPRI[/PARA] is smaller than that of the other sevices, the user access may be affected.
Not involved
Not involved
The gain range supported by the STMA varies with models and vendors. It is recommended that you list the gain range supported by the STMA by running the DSP TMAFUN command before setting the gain.
Not involved
Not involved
Not involved
Not involved
Not involved
The running of the command fails if the WMPT is not configured with a GPS card. For GPS feeders delivered by Huawei Technologies Co. Ltd., the delay equals the feeder length (m) multiplied by 3.8 (ns/m). For feeders delivered by other vendors, contact the corresponding vendors about the delay
Not involved
The parameter modification has no impact on the equipment. RRU num must be greater or equal than 2.
Not involved
Not involved
Not involved
There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity.
Not involved
The inner handover radius of the local cell must not be greater than cell radius.
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. For details, refer to <a href="BTS3836CABINET.htm">Subrack Information Table</a>.
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature. The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected. This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30. It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Heater Start Temperature must be smaller than that of the Heater Close Temperature. The value of the Heater Close Temperature should not be set too large. Otherwise, the heat dissipation of the system will be affected. This command can be run successfully for the NCMU in the auxiliary power system of the RRU or BBU only when the power system is the APM30. It is recommended that you obtain the current heater parameter values by running the LST HTPA command before setting the threshold to avoid configuration mistakes.
Not involved
There must be a gap of no less than 5% between the upper limit and the lower limit of the humidity. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
This parameter indicates the maximum length of the FP before multiplexing. The FP can be multiplexed only when its frame length is smaller than this value.
Not involved
The RRU IF offset is usually set by users in network planning. In general, it is recommended that this command be not run by users. The RRU IF offset value takes effect immediately after the parameter is modified.
Not involved
Not involved
Delay is introduced when the traffic is not busy. If this switch is enabled, system will detect Transmission Link Fault and try to recover it. When a port connects to an upper node such as RNC or upper NodeB, this port should be set as RECOVEDRX, while the port of the upper node should be set as EXT8K. When a port connects to a lower node, it should be set as EXT8K, while the port of the lower node should be set as RECOVEDRX.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
The value of this parameter must be smaller than the physical interface rate.
The value of this parameter must be smaller than the physical interface rate.
Not involved
Not involved
This parameter must be consistent with the [PARA]FRAME[/PARA] parameter of the peer E1/T1 interface.
The available bandwidth of service is affected when [PARA]Function[/PARA] is set to ENABLE and [PARA]ULCIR[/PARA] is set too small.
Not involved
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in freerun mode. The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source. Ensure that the clock source is available before running the command. If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully. The command cannot be run when the clock quality test is being performed. If the system responds with a "Clock source is unavailable" message after you run the command, do as follows: For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command. For the GPS card clock source, check whether the GPS is configured through This parameter must be consistent with that of the peer Ethernet interface.
The service is affected when the The service is re-established only when [PARA]LM[/PARA] is set to REMOTE the loop is cancelled. or LOCAL.
The loop back mode can be overwritten. The command only takes effect with the IP packets of the UDP The service is re-established only when protocol. This command cannot be the loop is cancelled. executed with IP tracing at the same time. Some services may be interrupted.
Not involved
The parameter modification has no impact on the equipment. If the switch is set to ON, it is recommended that you run the LST VSWRLIMIT to query the current VSWR limit before setting the VSWR limit.
Not involved
Not involved
The parameter modification has no impact on the equipment. When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.
Not involved
The service is affected when the The service is re-established only when [PARA]LM[/PARA] is set to REMOTE the loop is cancelled. or LOCAL.
This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.
This parameter must be consistent with [PARA]LNCODE[/PARA] of the peer E1/T1 interface.
The service is re-established only when The parameter modification has no the loop is cancelled. impact on the equipment.
The service based on the The service is re-established only when [PARA]PEERIP[/PARA] will be the loop is cancelled. interrputed.
The scrambling mode that has been set must be consistent with the E1 supported. If [PARA]LNCODE[/PARA] of the E1 supported is set to AMI, you must use the scrambling mode.
This parameter must be consistent with that of the peer ethernet interface.
Not involved
The data stream on the user plane can be classified as different service classes among the user data types according to the DSCP values, and the classification corresponds to different VLAN settings. The parameter modification has no impact on the equipment.
Not involved
This parameter must be consistent with that of the peer Ethernet interface.
This parameter must be consistent with that of the peer Ethernet interface.
This parameter must be consistent with that of the peer Ethernet interface.
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold. The two temperature thresholds correspond to the following two temperature alarms respectively: Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold. Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30. It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. If the SASU works in bypass mode, it does not support tower-mounted amplification The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
If a clock source exists and the clock mode is set to FREE, the clock source is invalid and the clock works in freerun mode. The system clock works in free-run mode when the clock source is faulty. After the reference clock source is restored, the NodeB uses the clock source. Ensure that the clock source is available before running the command. If the system uses the IP clock source, the IP clock source can be configured to automatic or manual mode. In automatic IP mode, the IP source link in a normal state and with a high priority will be chosen as the clock source. In manual IP mode, the cabinet number, subrack number, slot number, and IP link number are required, and they can be configured successfully. The command cannot be run when the clock quality test is being performed. If the system responds with a "Clock source is unavailable" message after you run the command, do as follows: For the LINE clock source, check whether the LINE clock is configured through the DSP LNKSRC command. If not, add the LINE clock source through the ADD LNKSRC command. For the GPS card clock source, check whether the GPS is configured through
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified when the logical cell exists; The maximum transmit power of the local cell must stay within the value range supported by the power amplifier; otherwise, the local cell is unavailable.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. A string of up to 31 characters can be entered. The string cannot be all blanks, or contain characters such as '<', '>', '!', '?', '^', two or more spaces, or two or more percentage symbols (%). It is recommended you name the NodeB after the place.
Not involved
Not involved
Not involved
Adjusting the downtilt of the RET antenna may affect the antenna coverage. Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command. The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt. It takes up to three minutes to set the tilt of an RET antenna. For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.
Not involved
A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ". A string of up to 31 characters can be entered. The string cannot be all blanks or all '\'s, or contain the characters such as ">", "<", "!", "?", ";", """, "'", or ", ".
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Over Temperature Threshold must be larger than that of the Low Temperature Threshold. The two temperature thresholds correspond to the following two temperature alarms respectively: Over Temperature Threshold: the over temperature alarm is reported when the actual temperature exceeds the Over Temperature Threshold. Low Temperature Threshold: the low temperature alarm is reported when the actual temperature is lower than the Low Temperature Threshold. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30. It is recommended that you obtain the current threshold values by running the LST TATH command before setting the threshold to avoid configuration mistakes.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
The output ports only exist on the NEMU. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty.
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modification has no impact on the equipment. If the position of the RRU is TRUNK, you can infer that the position of the RRU is in the main chain or ring. If the position of the RRU is BRANCH, you can infer that the position of the RRU is in a parent RRU. All parent RRUs refer to the RHUB.
Not involved
Not involved
Not involved
If the ALD system type is Custom, the value can be set to R0A, R0B, and RET_PORT. If the ALD system type is RET_ONLY_MULTICORE, the value can be only set to RET_PORT. In other cases, the value can be set to R0A and R0B.
Not involved
Not involved
Not involved
An auxiliary power system can supply power to multiple RRUs. One RRU controls this auxiliary power system. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
This command can be run only when the RRU corresponding to the specified antenna connector works properly. The modification takes effect immediately after the command is run. If the Single-Antenna Remote Electrical Tilt (SINGLE-RET), MultiAntenna Remote Electrical Tilt (MULTI_RET), Smart Tower-Mounted Amplifier (STMA), or Same Band Antenna Sharing Unit (SASU) is used, you should set the ALD power switch to ON. During the operation, the system may automatically set the switch of the antenna connector to OFF due to the ALD current abnormal alarm. For details, refer to ALM-1319 RRU ALD Current Abnormal. The ALD power switches for ports labeled R0A and RET_PORT on the RRU cannot be set to ON at the same time. Otherwise, the system responds with an "Execution failed" message. When the ALD power switch is set to ON, you need to set the current alarm threshold of that port. The ALD current alarm thresholds vary with the ALD system types and connections, as listed in the following table: The ALD system type can be categorized into the undercurrent alarm occurrence threshold (mA), the undercurrent alarm clearance threshold (mA), the overcurrent alarm The modified parameters take effect immediately; When the NodeB works in four-way antenna mode, it does not support the cell radius larger than 30 km; When the logical cell exits, you cannot make dynamic modification to the cell radius when the cell radius changes between equal to or smaller than 30 km and larger than 30 km.
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. The remote cell group to be modified must exist; It contains a string of up to 31 bytes. The string should not be totally blanks or contain the following characters: ' < ', ' > ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. A string of up to 31 characters can be entered. The string cannot be all blanks or contain the following characters such as ">", "<", "!", "?", ";", """, "'", ", ", or "\". This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
To specify the RRUs for a local cell in the distributed sector, you may repeatedly execute the command; when you remove the ending RRU from the cell, the command fails to be executed.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter can be successfully modified only when the logical cells are not set up. After this parameter is modified, all cells in the NodeB are set up again according to the new resource allocation mode.
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The type of the sub-board can be modified only if the sub-board is removed.
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Use this command to add a destination port which is a FTP server port providing FTP services. The port is corresponding to a FTP server ip address. The max number of list is twenty. This parameter cannot be modified.
Not involved
Not involved
After you set an alarm to be shielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. Then, when the alarm is cleared manually, the NodeB generates the alarm clearance report. If the alarm does not exist at that time, the NodeB does not generate the alarm occurrence report or clearance report. When you set an alarm to be unshielded, the NodeB handles the alarm according to its current status. If the alarm exists at that time, the NodeB generates the alarm occurrence report. If the alarm does not exist at that time, the NodeB does not generate any report. After you set an alarm to be unshielded, the NodeB handles the alarm in a normal way. If the alarm is generated, the NodeB generates the alarm occurrence report. If the alarm is cleared, the NodeB generates the alarm clearance report.
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. This parameter cannot be modified.
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Not involved
Not involved
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur. Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Not involved
Not involved
Among the input parameters, the following ones must be entered in compliance with the sensor specifications: Sensor Output Upper Limit, Sensor Output Lower Limit, Measurement Upper Limit, and Measurement Lower Limit. Otherwise, such serious faults as incorrect monitoring values may occur.
Not involved
Not involved
Not involved
Not involved
When the encryption mode for transmission is set to AUTO, the FTP client tries to transmit data in encryption mode first. If the transmission fails, the FTP client transmits data in plain text mode. If the FTP client is set to support firewalls, the FTP client sends the CCC command to switch the data transmitted in the control command channel to plain text. After this command is run successfully, the settings take effect in the next FTP operation.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
None
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
This parameter cannot be modified. Adjusting the downtilt of the RET antenna may affect the antenna coverage. Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command. The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt. It takes up to nine minutes to set the tilt of an RET antenna. For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt. The site to be modified must exist; It contains a string of up to 31 bytes. The string should not be totally blanks or contain the following characters: ' < ', ' > ', ' ! ', '?', ' ' ', ' " '. In addition it will be ignored if the end of the string is "\".
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The delayed discharge test time has a direct impact on power-off test, timing test and manual background test.
Not involved
Adjusting the downtilt of the RET antenna may affect the antenna coverage. Ensure that you have calibrated the RET antenna before setting the downtilt of the antenna through the CLB ANT command. The tilt range supported by the RET antenna varies with models and vendors. It is recommended that you list the tilt range supported by the antenna through the LST ANTTILTRNG command before adjusting the tilt. It takes up to 11 minutes to set the tilt of an RET antenna. For the single polarization RET antenna, ensure that the two RET antennas connected to the ANT_Tx/RxA and ANT_RxB connectors have the same tilt.
Not involved
Not involved
Not involved
Not involved
Not involved
This parameter cannot be modified. There must be a gap of no less than 3C between the upper limit and the lower limit of the temperature
Not involved
Not involved
You can successfully run this command only if the NCMU works properly. The configuration takes effect immediately after the parameter is modified. The value of the Low Temperature Critical Point must be smaller than that of the High Temperature Critical Point. This command is applicable to only the NCMU of the direct-ventilation type and that with a ventilation film. This command can be run successfully for the NCMU in the auxiliary power system of the RRU only when the power system is the APM30.
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
For details on the value range, refer to <a href="BTS3836CABINET.htm">Subrack Information Table</a>. The parameter modification has no impact on the equipment. There must be a gap of no less than 3C between the upper limit and the lower limit of the temperature
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. You can run this command only if the specified RRU works properly. Normally, the RRU TX unit is set to ON. If you set the RRU TX unit to OFF, the cell in this RRU cannot work properly. After you run this command to set the RRU TX unit to ON in case that the RRU TX unit is OFF, the TX transmission channel of the RRU is unavailable until the logical cell is set up and the carrier frequency is configured for the RRU.
Not involved
Not involved
Not involved
Not involved
Ensure that the transmission resource group to be modified does exist, and the bandwidth of the transmission resource groups after modification should not be greater than the bandwidth of the physical port carrying them. If the bearing type of the transmission resource group is ATM, the bandwidth of the transmission resource groups after modification should satisfy the bandwidth check. The method to check the bandwidth is as follows: 1. Suppose the bandwidth of the Bearing Type physical port is A if the AAL2 path does not join in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + MAX (bandwidth occupied by all AA2PATH carried on this physical link (using PCR for calculation))+ bandwidth occupied by OM channel carried on this physical link (using SCR for calculation in case of VBR) <= A. 2. Suppose the bandwidth of transmission resource group is A if the AAL2 path joins in the configured transmission resource group, then SUM (bandwidth occupied by all SAAL links carried on this physical link (using SCR for calculation in case of VBR)) + The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
When you set the alarm limit of the NEMU, do not need to enter the value, because the recovered limit is automatically set by the system.
Not involved
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Not involved
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Not involved
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Not involved
Modifying delay may affect normal services of a cell. The heavier the load in the cell is, the more obvious the impact is; Test results indicate that the change smaller than 300 ns in delay shows no impact on the normal services of the cell.
Not involved
This parameter cannot be modified when the logical cell exists; The downlink and uplink frequencies of the local cell must stay within the same frequency band; If the power amplify unit can only support two carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 5MHz(25*0.2MHz) ; If the power amplify unit can support four carriers, then in a Power Amplifier, the difference between frequencies of local cells must be greater or equal to 4.2MHz(21*0.2MHz), and be less or equal to 15MHz(75*0.2MHz). This parameter cannot be modified.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
If two clock links of the PTP protocol are configured, the two clock links must be in the same slot with the same client address and domain value. This parameter is affective when link type is 1588 clock link.
No involved
No involved
Before the secondary homing NCP/CCP is added, the corresponding primary homing NCP/CCP must exist. The maintenance domain name must be unique in one equipment. None
No involved
No involved
No involved
The maintenance domain name must be unique in one equipment. The maintenance association name must be unique in one maintenance domain. VLAN must be mapped with the maintenance association. Only in VLAN
No involved
No involved
No involved
No involved
Only in VLAN
No involved
A string of 12 characters is required One RMEP can be assigned with up to four IP addresses. The assigned IP address cannot be in conflict with the local IP address.
No involved
Not involved
Not involved
Not involved
None
Not involved
None
Not involved
None
Not involved
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
It only takes effect on the new user after the parameter is set, and the old users use the old parameter. To modify the Mac-hs scheduling parameters of the specified local cell, ensure that the local cell supports HSDPA. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. It only takes effect on the new user after the parameter is set, and the old users use the old parameter. None
Not involved
Not involved
None
None
None
None
None
None
None
None
None
None
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
None
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
No involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
No involved
Only in VLAN
Not involved
Not involved
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
Validation of Modification The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.3 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The board should be reset to make the modified parameter None valid.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
RAN11.0
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0 Versions earlier than RAN11.0 RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0 Versions earlier than RAN11.0
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
RAN11.0
None
None
Attribute
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Radio
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Radio
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Radio
Equipment
Transport
Transport
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Transport
Transport
Equipment
Equipment
Transport
Transport
Transport
Equipment
Equipment
Transport
Transport
Equipment
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Radio
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Radio
Transport
Radio
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Transport
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Radio
Radio
Equipment
Radio
Equipment
Transport
Radio
Radio
Transport
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Transport
Equipment
Equipment
Equipment
Radio
Transport
Transport
Radio
Equipment
Transport
Transport
Equipment
Transport
Equipment
Transport
Equipment
Transport
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Radio
Equipment
Transport
Radio
Transport
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Equipment
Transport
Equipment
Transport
Equipment
Radio
Equipment
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
Equipment
Transport
Transport
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Equipment