Professional Documents
Culture Documents
MATERIAL
AEROSOL CANS AIRCRAFT MATERIAL ASBESTOS-CONTAINING SCRAP (furnaces, pipes, building materials, etc.) BALLASTS BARRELS, DRUMS, AND OTHER CONTAINERS
BATTERIES, LEAD-ACID ONLY BERYLLIUM OR MATERIALS CONTAINING BERYLLIUM CAPACITORS COMPRESSED/LIQUEFIED GAS CYLINDERS AND VESSELS (oxygen, propane, acetylene, argon, refrigerants, fire extinguishers, etc.) DROSS, METALLIC
Electronics without circuit boards or cathode ray tubes (monitors, televisions) are acceptable. If segregated from other scrap, select facilities may accept electronics with circuit boards and cathode ray tubes. Verified free of radioactive sources. Documentation supporting that oil did not contain greater than 50 ppm PCBs and drained of free-flowing oil. Documentation supporting that oil did not contain greater than 50 ppm PCBs and drained of free-flowing oil (or equipment was decontaminated in accordance with federal TSCA regulations). Select facilities may accept if identified and segregated during unloading. Free of capacitors or ballasts with PCB concentrations greater than 50 ppm and free of bulbs Select facilities may accept household fixtures. See APPLIANCES None Certification statement stating scrap to be free of explosive, radioactive, and hazardous materials. Documentation obtained in accordance with TSCA regulations supporting that PCB concentrations are less than 50 ppm. Open, empty and dry. Documentation supporting that oil did not contain greater than 50 ppm PCBs and drained of free-flowing oil (or equipment was decontaminated in accordance with federal TSCA regulations with Environmental Manager approval) and free of mercury-containing devices None
Certification upon delivery or prior to shipment that refrigerant has been removed or leaked prior to shipment, or Select facilities may accept in select situations for a fee if facilities exist to recover refrigerant None
All fluids to be drained prior to delivery. See also AEROSOL CANS, BARRELS/DRUMS, HEATERS, HYDRAULIC EQUIPMENT, PAINT CANS, PUMPS, TANKS, and VEHICLES. Segregated from other commodities and discharged or otherwise spent A minimum of 3-foot square hole at both ends and thoroughly cleaned of liquids and gases (odor free). Select facilities may accept if attached to an auto body; a deduction may be applied. Dry type or Documentation supporting that oil did not contain greater than 50 ppm PCBs and drained of free-flowing oil (or equipment was decontaminated in accordance with federal TSCA regulations). Select facilities may accept if hot-drained of free-flowing oil for a minimum of 24 hours, punctured and containerized when delivered. Free of mercury switches, batteries, refrigerants, antifreeze, fuel, and oils. Refrigerant recovery certification required from supplier. Select facilities may accept "as is" if uncrushed and facility is equipped to demanufacture. None See APPLIANCES. Free of asbestos and/or PCBs