Professional Documents
Culture Documents
FASTIRON EDGE SWITCH X-SERIES t FES X-series is available in two models:24-port 10/100/1000 Mbps (RJ-45) with the FES X424,
t
and 48-port 10/100/1000 Mbps (RJ-45) with the FES X448.Both include four SFP ports to
support SX,LX,LHA,and CWDM GbE fiber optics
Orderable or field upgradeable to include 1-port or 2-port 10 Gigabit Ethernet (10GbE) module that
uses hot-pluggable,state-of-the-art,low-cost and removable “10 Gigabit Small Form Factor Pluggable”
(XFP) optics to support SR,LR,and ER optics
Includes IronWare™—Foundry’s intelligent embedded system—that comes with advanced Layer 2
features such as Metro Ring Protocol and Virtual Switch Redundancy Protocol,with IronShield™
security for wire-speed network protection,and software upgradeable to support enterprise Layer 3,
including support for IP routing protocols such as RIPv1/v2 and OSPF,and support for multicast
routing,including PIM-SM,PIM-DM and DVMRP
Includes sFlow™—an industry standard for network traffic monitoring—to deliver hardware-based
and real-time network traffic monitoring,“always-on”fault and performance management,capacity
planning,security policing,and precise network traffic accounting on all ports from Layer 2 up to Layer 4
t Load-balanced,hot-swappable,and redundant power supply units that ensure network reliability for
Enterprises and Metro Service Providers
t Efficient space-saving form factor with front-facing data ports and a built-in temperature monitor sensor
Foundry’s award-winning FastIron® Edge Switch (FES) now The Foundry Networks® FES X-series establishes the next
includes the X-series products—the FastIron Edge Switch X424 benchmark in delivering the most adaptable feature set,
(FES X424) and the FastIron Edge Switch X448 (FES X448)— combined with high density GoC with 10 Gigabit Ethernet
to provide greater flexibility,higher reliability,enhanced security, upgradeability in a compact form factor.Specifically,the FES X-
extensive redundancy, and a new level of high performance by series establishes the industry’s leading price-performance value
combining Gigabit over Copper (GoC) and 10 Gigabit Ethernet, for fixed Ethernet solutions with the addition of removable and
while simplifying network management complexity and replaceable 10 Gigabit Ethernet modules in a 1.5 Rack Unit
reducing on-going training expenses.The FES X-series increases (RU) form factor. The FES X-series can be initially installed
a network’s return on investment (ROI) and decreases total cost using four “Small Form Pluggable” (SFP) Gigabit Ethernet
of ownership (TCO) by offering improved functionality through ports,and then later upgraded to support one or two “10 Gigabit
a common feature set controlled by industry-standard Command Small Form Factor Pluggable”(XFP) modules.
Line Interface (CLI) syntax, all in a compact (1.5 Rack Units)
To meet existing and emerging network requirements, the FES
form factor at industry-leading prices. The FES X-series is an
X-series delivers a full complement of standards-based, feature-
advanced hardware platform that provides advanced Layer 2
rich switching and Base Layer 3 routing capabilities, hardware
switching and is software upgradeable to deliver full enterprise
and software resilience, rich quality of service (QoS) controls
Layer 3 routing. The FES X-series is the ideal networking
including prioritization and rate limiting (*), standard and
platform to deliver 10GbE from the edge to the core.
extended ACLs,integrated Gigabit over Copper (GoC) Ethernet
ports, and more. The extensive feature set supports network
requirements ranging from basic connectivity to multicast-based
streaming audio/video applications for converged services
including Voice over IP (VoIP), using a software upgrade to full
enterprise Layer 3 (*).
1
The FES X Series includes the following configurations:
t FESX424: 24 10/100/1000 Mbps ports,4 SFP ports to support
SX,LX,LHA,and CWDM Gigabit Ethernet optics.Orderable or
field-upgradeable to include a 1-port or 2-port 10GbE module that
supports 1 or 2 XFP ports for use with SR,LR,and ER 10GbE
optics.Occupies 1.5 RU,and includes one hot-swappable,field
replaceable AC power supply.An additional power supply can be
t Figure 1: FastIron Edge Switch X424
added to deliver 1+1 redundancy.
Includes support for jumbo frames of up to 9,216 bytes.Advanced
Layer 2 & Base Layer 3 switching,and software upgradeable to full
enterprise Layer 3,including support for IP routing protocols such as
RIPv1/v2 and OSPF,and support for multicast routing,including
PIM-SM,PIM-DM and DVMRP.
4
1000Base-LX,and 1000Base-LHA for Gigabit Ethernet links up Foundry’s FES X-series is ideal for delivering high-density and
to 550m over Multimode Fiber (MMF),10km over Single Mode low-cost Gigabit over Copper (GoC), and 10GbE solution for
Fiber (SMF),and 120km over SMF,respectively. the enterprise campus. The FES X424 and FES X448 can be
fitted with 1-port or 2-port 10GbE modules, which use the
Higher levels of link resilience can be implemented by deploying
state-of-the-art “10 Gigabit small form factor pluggable” optics
dual-homed and redundant 10GbE uplinks enabled with
(XFP optics).With two ports of 10GbE, network managers can
802.3ad,Per-VLAN Spanning Tree (PVST/PVST+),Protected-
easily build redundancy in their campus network and take
Link, Load-sharing 802.1Q trunks, or OSPF Equal Cost Multi
advantage of low cost XFP optics priced much lower than
Path (ECMP) (*) data center connections. This unmatched
XENPAK optics.
selection of redundancy, quick recovery, and load balancing
options grants the network administrator the widest range of As shown in figure 4, the FES X-series can be used to deliver
implementation choices, making the FES X-series the ideal GoC to the desktop, high-density aggregation within the
intelligent enterprise switch to deliver 10GbE from the edge to distribution layer, and GoC connectivity for high-performance
the core. computing, grid-computing, and network-attached storage.
Support for jumbo frames of up to 9,216 bytes ensures faster file
Enterprise Application transfer between high-end servers within the data center and
assists in reducing server CPU load.The 10GbE uplinks within
Low Cost GoC+10GbE Solution for the FES X-series ensures that the data center can be easily
the Enterprise Campus
connected to Foundry’s BigIron MG8, enabling concurrent
support for low-latency applications such as VoIP, mission-
critical applications such as manufacturing resource planning,
Collapsed Aggregation/Distribution and high volume network traffic such as remote backup.
FES X448
High-End
users 10GbE
FES X448
Cluster
Computing or
High Performance
Computing
FES X424 Network
BIGIRON MG8 10GbE Attached
Storage
802.3ad Link
Aggregation
(Nx1-GbE)
10GbE
FES X424
Server Farm
Aggregation
Aggregation/Distribution in the Data Center
Distribution
Legend
10GbE
10/100/1000 Mbps
1-GbE Services
10Gbe
1-GbE Services
FES X448
NetIron 40G
Access Ring 1 Metro Backbone
10GbE Ring 10GbE
FES X448
1-GbE Services
Legend
10GbE
10/100/1000 Mbps
Ordering Information
Part Number Description
FESX424 FastIron Edge X424 with Base L3 SW.Includes 24 10/100/1000 ports (RJ-45) and 4-port SFP for
fiber optics (SX,LX,LHA,and CWDM),and one AC power supply.
FESX424+1XG FastIron Edge X424 with Base L3 SW.Includes 24 10/100/1000 ports (RJ-45),4-port SFP for fiber
optics (SX,LX,LHA,and CWDM),1-slot XFP 10GbE module and one AC power supply
FESX424+2XG FastIron Edge X424 with Base L3 SW.Includes 24 10/100/1000 ports (RJ-45),4-port SFP for fiber
optics (SX,LX,LHA,and CWDM),2-slot XFP 10GbE module and one AC power supply.
FESX424-PREM FastIron Edge X424 with full Enterprise L3 SW.Includes 24 10/100/1000 ports (RJ-45) and 4-port
SFP for fiber optics (SX,LX,LHA,and CWDM),and one AC power supply.(*)
FESX424+1XG-PREM FastIron Edge X424 with full Enterprise L3 SW.Includes 24 10/100/1000 ports (RJ-45),4-port SFP
for fiber optics (SX,LX,LHA,and CWDM),1-slot XFP 10GbE module and one AC power supply.(*)
FESX424+2XG-PREM FastIron Edge X424 with full Enterprise L3 SW.Includes 24 10/100/1000 ports (RJ-45),4-port SFP
for fiber optics (SX,LX,LHA,and CWDM),2-slot XFP 10GbE module and one AC power supply.(*)
FESX448 FastIron Edge X448 with Base L3 SW.Includes 48 10/100/1000 ports (RJ-45) and 4-port SFP for
fiber optics (SX,LX,LHA,and CWDM),and one AC power supply.
FESX448+1XG FastIron Edge X448 with Base L3 SW.Includes 48 10/100/1000 ports (RJ-45),4-port SFP for fiber
optics (SX,LX,LHA,and CWDM),1-slot XFP 10GbE module,and one AC power supply.
FESX448+2XG FastIron Edge X448 with Base L3 SW.Includes 48 10/100/1000 ports (RJ-45),4-port SFP for fiber
optics (SX,LX,LHA,and CWDM),2-slot XFP 10GbE module,and one AC power supply
FESX448-PREM FastIron Edge X448 with full Enterprise L3 SW.Includes 48 10/100/1000 ports (RJ-45) and 4-port
SFP for fiber optics (SX,LX,LHA,and CWDM),and one AC power supply.(*)
FESX448+1XG-PREM FastIron Edge X448 with full Enterprise L3 SW.Includes 48 10/100/1000 ports (RJ-45),4-port SFP
for fiber optics (SX,LX,LHA,and CWDM),1-slot XFP 10GbE module,and one AC power supply.(*)
FESX448+2XG-PREM FastIron Edge X448 with full Enterprise L3 SW.Includes 48 10/100/1000 ports (RJ-45),4-port SFP
for fiber optics (SX,LX,LHA,and CWDM),2-slot XFP 10GbE module,and one AC power supply.(*)
FESX424-L3U Layer 3 upgrade for the FES X424 (*)
FESX448-L3U Layer 3 upgrade for the FES X448 (*)
X4-1XG Field upgradeable 1-port 10GbE XFP expansion module
X4-2XG Field upgradeable 2-port 10GbE XFP expansion module
10G-XFP-SR 10GbE SR XFP optic,MMF,LC connector
10G-XFP-LR 10GbE LR XFP optic,SMF,LC connector
10G-XFP-ER 10GbE ER XFP optic,SMF,LC connector (*)
RPS-X424 Redundant power supply (220W) for the FES X424
RPS-X448 Redundant power supply (600W) for the FES X448
7
Technical Specifications:
Standards Compliance Quality of Service Physical Dimensions
- 802.1d Bridging - 802.1p Mapping to Priority Queue - FESX424:
- 802.1D-1998 - MAC Address Mapping to Priority Queue 2.63" (H) x 17.5" (W) x 19.6" (D)
- 802.1q/pVLAN Tagging and Priority - ACL Mapping to Priority Queue 6.68cm (H) x 44.45cm (W) x 49.78cm (D)
- 802.1w Rapid Spanning Tree - ACL Mapping to ToS/DSCP - FESX448:
- 802.1X Port-based Authentication,Dynamic - ACL Mapping and Marking of ToS/DSCP 2.63" (H) x 17.5" (W) x 19.6" (D)
VLAN,ACL,and MAC Filter Group Assignment - DiffServ Support (*) 6.68cm (H) x 44.45cm (W) x 49.78cm (D)
- 802.3 10Base-T - QoS Queue Management Using Weighted
- 802.3 Ethernet Like MIB Round Robin and Strict Priority Weight
- 802.3ad Link Aggregation (Dynamic and Static) - FESX424:
and Trunk Groups Management and Control - 25 lbs (11.36 kg) Fully Loaded
- 802.3u 100Base-TX - 802.3 MAU MIB (RFC 2239) including dual redundant power
- 802.3z 1000Base-SX/LX/T - Architecture for Describing SNMP Framework (RFC 2571) - 17.5 lbs (7.95 kg) Empty
- 802.3ae 10 Gigabit Ethernet - BootP (RFC 951 & RFC 1542) - FESX448:
- BootP/DHCP Relay (RFC 2131) - 29 lbs (11.36 kg) Fully Loaded
Layer 2 Features - Bridge MIB (RFC 1493) including dual redundant power
- 4,096VLANs - Configuration Logging - 17.5 lbs (7.95 kg) Empty
- 16,000 MAC Addresses - Ethernet Interface MIB (RFC 1643)
- ProtocolVLAN (802.1v),PrivateVLAN, - Ethernet MIB (RFC 1643) Environmental Ranges
SubnetVLAN - HTTP (RFC 2068) - Acoustic:47dB
- Port Security (MAC Address Locking) - ICMP Router Discovery Protocol (RFC 1256) - Operating temperature:32° to 104°F (0° to 40°C)
- Layer 2 ACLs - Industry Standard Command Line Interface (CLI) - Relative Humidity:5% to 90%,non-condensing
- Dual ModeVLANs - Integration with HP OpenView for Sun Solaris,HP-UX, - Storage temperature:-23° to 158°F (-25° to 70°C)
- Fast Port Span IBM’s AIX,and Windows NT Standalone Windows NT - Maximum Watts:220W (750 BTU/Hr) per
- Protected-link - IP Forwarding Table MIB (RFC 1354) supply for the FESX424 and 600W (2,047
- GenericVLAN Registration Protocol - IronView Network Manager (INM) Web based BTU/Hr) per supply for the FESX448
- MAC-Layer Filtering graphical user interface - Storage altitude:10,000ft (3,000m) maximum
- Mirror/Monitor Ports - Embedded Web Management
- PerVLAN STP (PVST/PVST+) - sFlow (RFC 3176) Power Requirements
- VLAN Groups - MIB-II (RFC 1213) - FESX424 AC input voltage:100vAC @ 3.5A
- Single-instance Spanning Tree - Repeater MIB (RFC 1516) MAX,240vAC @ 1.5A MAX,50-60Hz per
- Virtual Switch Redundancy Protocol (VSRP) - RIPv2 MIB (RFC 1724) auto-sensing,auto-switching power supply
- Uni-Directional Link Detection (UDLD) - RMON MIB (RFC 1757) - FESX448 AC input voltage:100vAC @ 6A
MAX,240vAC @ 2.5A MAX,50-60Hz per
- SNMP Message Processing and Dispatching (RFC 2572) auto-sensing,auto-switching power supply
Layer 3 Enhancements - SNMP MIB II (RFC 1573)
- 4,000 IP Routes for Base L3 - SNMPView-based Access Control Model SNMP (RFC 2575) Safety Certifications
- 128,000 IP Routes (*) - SNMPv1/v2c (RFC 1157) - EN 60950
- Layer 3 IP ACLs - SNMPv3 Applications (RFC 2573) - CAN/CS-C22.2 No.60950-00
- SNMPv3 Intro to Framework (RFC 2570) - EN 60825-1 Safety of Laser Products—Part 1
Protocol Support - SNMPv3 User-based Security Model (RFC 2574) - EN 60825-2 Safety of Laser Products—Part 2
- DNS Client - Support for Multiple syslog Servers - IEC 950
- IP (RFC 1812) (*) - TELNET (RFC 854) - UL 1950 Third Edition
- OPSF NSSA (RFC 1587) (*) - TFTP (RFC 783) - CSA 950
- OSPF (RFC 1583) (*)
- OSPF Database Overflow (RFC 1765) (*) Element Security Options Electromagnetic Emission
- OSPF Traps (RFC 1850) (*) - Authentication,Authorization,& Accounting (AAA) Certifications
- OSPFv2 (RFC 2328v2) (*) - Bi-level Access Mode (Standard and EXEC Level) - FCC Class A (Part 15)
- RIPv1 (RFC 1058) (*) - Protection for Denial of Service attacks - EN 55022/CISPR-22 Class A
- RIPv2 (RFC 1723) (*) - RADIUS - VCCI Class A
- VRRP (RFC 2338) - Secure Copy (SCP)
- VRRPE (FoundryVRRP Enhanced) (*) - Secure Shell Immunity
- TACACS/TACACS+ - Generic:EN 50082-1
IP Multicast - Username/Password
- DVMRP Host Requirements (RFC 1122) (*) Warranty
- DVMRPv2 (*) Performance - 5-year Limited Lifetime Hardware Warranty
- IGMP Snooping - FESX424: - 90-days Software Warranty
- IGMPv1 (RFC 1112) - Switching Capacity 88Gbps
- IGMPv2 (RFC 2236) - Forwarding Rate 65MPPS
- PIM-DM (draft-ietf-v2-dm-03) (*) (*) Denotes future supported item
- PIM-SM (RFC 2362) (*) - FESX448:
- Switching Capacity 136Gbps
- Forwarding Rate 101MPPS
Although Foundry has attempted to provide accurate information in these materials, Foundry assumes no legal responsibility for the accuracy or
completeness of the information.More specific information is available on request from Foundry.Please note that Foundry’s product information does
not constitute or contain any guarantee,warranty or legal binding representation,unless expressly identified as such in duly signed writing.
© 2004 Foundry Networks, Inc.All Rights Reserved. Foundry Networks, BigIron, FastIron, NetIron, ServerIron, IronPoint,
Terathon, JetCore, EdgeIron, IronView, JetScope, IronShield, MetroLink, IronWare,TrafficWorks, Power of Performance and
the ‘Iron’ family of marks are trademarks or registered trademarks of Foundry Networks, Inc. in the United States and other 8
countries.All others are trademarks of their respective owners. DS-020/Rev2/04-04