Professional Documents
Culture Documents
MAX306/MAX307
The MAX306/MAX307 precision, monolithic, CMOS ♦ Guaranteed On-Resistance Match Between
analog multiplexers (muxes) offer low on-resistance Channels, <5Ω Max
(less than 100Ω), which is matched to within 5Ω ♦ Low On-Resistance, <100Ω Max
between channels and remains flat over the specified ♦ Guaranteed Flat On-Resistance over Specified
analog signal range (7Ω max). They also offer low leak- Signal Range, 7Ω Max
age over temperature (I NO(OFF) less than 2.5nA at ♦ Guaranteed Charge Injection, <10pC
+85°C) and fast switching speeds (tTRANS less than
♦ INO(OFF) Leakage <2.5nA at +85°C
250ns). The MAX306 is a single-ended 1-of-16 device,
and the MAX307 is a differential 2-of-8 device. ♦ ICOM(OFF) Leakage <20nA at +85°C
The MAX306/MAX307 are fabricated with Maxim’s ♦ ESD Protection >2000V
improved 44V silicon-gate process. Design improve- ♦ Plug-In Upgrade for Industry-Standard
ments yield extremely low charge injection (less than DG406/DG407/DG506A/DG507A
10pC) and guarantee electrostatic discharge (ESD) ♦ Single-Supply Operation (+4.5V to +30V)
protection greater than 2000V. Bipolar-Supply Operation (±4.5V to ±20V)
These muxes operate with a single +4.5V to +30V sup- ♦ Low Power Consumption, <1.25mW
ply, or bipolar ±4.5V to ±20V supplies, while retaining ♦ Rail-to-Rail Signal Handling
TTL/CMOS-logic input compatibility and fast switching. ♦ TTL/CMOS-Logic Compatible
CMOS inputs provide reduced input loading. These
improved parts are plug-in upgrades for the industry- ______________Ordering Information
standard DG406, DG407, DG506A, and DG507A. PART TEMP. RANGE PIN-PACKAGE
________________________Applications MAX306CPI 0°C to +70°C 28 Plastic DIP
Sample-and-Hold Circuits MAX306CWI 0°C to +70°C 28 Wide SO
Test Equipment MAX306C/D 0°C to +70°C Dice*
Heads-Up Displays MAX306EPI -40°C to +85°C 28 Plastic DIP
Guidance and Control Systems MAX306EWI -40°C to +85°C 28 Wide SO
Military Radios MAX306EQI -40°C to +85°C 28 PLCC
Communications Systems MAX306MJI -55°C to +125°C 28 CERDIP
Battery-Operated Systems Ordering Information continued at end of data sheet.
PBX, PABX * Contact factory for dice specifications.
Audio Signal Routing
COM
N.C.
N.C.
NO8
V+ V- GND
V+
V-
TOP VIEW
4 3 2 1 28 27 26
NO1
NO2
NO3
NO15 5 25 NO4
NO7 NO5
NO14 6 24 NO6 NO6
NO7
NO13 7 23 NO5 NO8
NO9 COM
NO12 8 MAX306 22 NO4 NO10
NO11
NO11 9 21 N03 NO12
NO13
NO10 10 20 N02 NO14
NO15
NO9 11 19 N01 NO16
12 13 14 15 16 17 18 CMOS DECODERS/DRIVERS
GND
N.C.
A3
A2
A1
A0
EN
PLCC A0 A1 A2 A3 EN
N.C. = NO INTERNAL CONNECTION Continued at end of data sheet. MAX306 16-CHANNEL SINGLE-ENDED MULTIPLEXER
2 _______________________________________________________________________________________
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
MAX306/MAX307
(V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
MIN TYP MAX
PARAMETER SYMBOL CONDITIONS UNITS
(Note 2)
INPUT
Input Current with
IAH VA = 2.4V or 15V -1.0 1.0 µA
Input Voltage High
VEN = 0V,
Off Isolation
VISO RL = 1kΩ, TA = +25°C -69 dB
(Note 6)
f = 100kHz, Figure 6
VEN = 2.4V,
f = 100kHz,
Crosstalk Between Channels VCT TA = +25°C -92 dB
VGEN = 1VP-P,
RL = 1kΩ, Figure 7
Logic Input Capacitance CIN f = 1MHz TA = +25°C 8 pF
f = 1MHz,
NO-Off Capacitance CNO(OFF) VEN = VNO = 0V, TA = +25°C 8 pF
Figure 8
f = 1MHz,
MAX306 130
VEN = 0.8V,
COM-Off Capacitance CCOM(OFF) TA = +25°C pF
VCOM = 0V,
MAX307 65
Figure 8
f = 1MHz,
MAX306 140
VEN = 2.4V,
COM-On Capacitance CCOM(ON) TA = +25°C pF
VCOM = 0V,
MAX307 70
Figure 8
_______________________________________________________________________________________ 3
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS—Single Supply
MAX306/MAX307
(V+ = +12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
MIN TYP MAX
PARAMETER SYMBOL CONDITIONS UNITS
(Note 2)
SWITCH
VNO,
Analog Signal Range (Note 3) 0 12 V
VCOM
INO = -1.0mA
On-Resistance RON TA = +25°C 120 175 Ω
VCOM = 3V or 10V
DYNAMIC
VNO1 = 8V,
Transition Time VNO8 = 0V,
tTRANS TA = +25°C 130 450 ns
(Note 3) VIN = 2.4V,
Figure 1
VINH = 2.4V,
Enable Turn-On Time VINL = 0V,
tON(EN) TA = +25°C 105 600 ns
(Note 3) VNO1 = 5V,
Figure 3
VINH = 2.4V,
Enable Turn-Off Time VINL = 0V,
tOFF(EN) TA = +25°C 80 300 ns
(Note 3) VNO1 = 5V,
Figure 3
CL = 1.0nF,
Charge Injection
Q VNO = 0V, TA = +25°C 2 10 pC
(Note 3)
RS = 0Ω
Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified
voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at
the extremes of the specified analog signal range.
Note 5: Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25°C.
Note 6: Off isolation = 20log VCOM/VNO, where VCOM = output and VNO = input to off switch.
4 _______________________________________________________________________________________
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
__________________________________________Typical Operating Characteristics
MAX306/MAX307
(TA = +25°C, unless otherwise noted.)
ON-RESISTANCE vs. VCOM ON-RESISTANCE vs. VCOM AND ON-RESISTANCE vs. VCOM
(DUAL SUPPLIES) TEMPERATURE (DUAL SUPPLIES) (SINGLE SUPPLY)
160 120 400
MAX306/7 TOC-01
MAX306/7 TOC-02
MAX306/7 TOC-03
V+ = +15V
140 V- = -15V 360
±5V 100
320
120
80 +125°C 280
100 ±10V 5V
+85°C
RON (Ω)
RON (Ω)
RON (Ω)
240
80 60
+25°C 200
±15V
60
40 -55°C 160
±20V
40 10V
120
20 15V
20 80
20V
0 0 40
-20 -15 -10 -5 0 5 10 15 20 -15 -10 -5 0 5 10 15 0 5 10 15 20
VCOM (V) VCOM (V) VCOM (V)
MAX306/7 TOC-06
V+ = +15V V+ = +15V V+ = +15V
140 V- = 0V 100 V- = -15V 100 V- = -15V
+125°C
120
10 10
OFF LEAKAGE (nA)
ON LEAKAGE (nA)
+85°C
100
+25°C 1 1
RON (Ω)
80 ICOM (ON)
-55°C 0.1 0.1
60
0.01 0.01
40 INO (OFF) ICOM (ON)
20 0.001 0.001
0 0.0001 0.0001
0 5 10 15 -55 -35 -15 5 25 45 65 85 105 125 -55 -35 -15 5 25 45 65 85 105 125
VCOM (V) TEMPERATURE (°C) TEMPERATURE (°C)
I+
20 10
V+ = +15V
V- = -15V
10
I+, I- (µA)
1
Qj (pC)
0
V+ = 12V
0.1
V- = 0V
-10
I-
0.01 V+ = +15V
-20
V- = -15V
VEN = VA = 0V, 4.5V
-30 0.001
-15 -10 -5 0 5 10 15 -55 -35 -15 5 25 45 65 85 105 125
VCOM (V) TEMPERATURE (°C)
_______________________________________________________________________________________ 5
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
_____________________________________________________________Pin Descriptions
MAX306/MAX307
MAX306 MAX307
NAME FUNCTION NAME FUNCTION
PIN PIN
1 V+ Positive Supply Voltage Input 1 V+ Positive Supply Voltage Input
__________Applications Information signal range to 1V above V+ and 1V below V-, but low
switch resistance and low leakage characteristics are
Operation with Supply Voltages unaffected. Device operation is unchanged, and the
Other than ±15V difference between V+ and V- should not exceed +44V.
Using supply voltages other than ±15V will reduce the
analog signal range. The MAX306/MAX307 switches
operate with ±4.5V to ±20V bipolar supplies or with a V+
+4.5V to +30V single supply; connect V- to GND when
operating with a single supply. Also, both device types
can operate with unbalanced supplies such as +24V
and -5V. The Typical Operating Characteristics graphs
show typical on-resistance with 20V, 15V, 10V, and 5V
supplies. (Switching times increase by a factor of two NO
or more for operation at 5V.) COM
Overvoltage Protection
Vg
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maxi-
mum ratings because stresses beyond the listed rat-
ings may cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by either V-
the logic inputs, NO, or COM. If power-supply
sequencing is not possible, add two small signal
diodes in series with supply pins for overvoltage pro- Figure 1. Overvoltage Protection Using External Blocking
tection (Figure 1). Adding diodes reduces the analog Diodes
6 _______________________________________________________________________________________
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
______________________________________________Test Circuits/Timing Diagrams
MAX306/MAX307
+15V
V+
A0 NO1 ±10V
A1
NO2-NO15
A2
A3 MAX306 NO16 +10V
tr < 20ns
EN COM LOGIC +3V tf < 20ns
VOUT INPUT 50%
GND V-
50Ω 35pF 0V
300Ω
-15V VNO1
+15V 90%
SWITCH
V+ OUTPUT
A0 NO1B ±10V VOUT 0V
A1 90%
NO1A-NO8A VNO16
A2
NO8B +10V
tTRANS tTRANS
EN MAX307 COMB VOUT ON
GND V-
35pF
50Ω 300Ω
-15V
+15V
V+
EN NO1 -5V
A0 NO2-NO16
A1
A2 MAX306
A3 tr < 20ns
COM VOUT
LOGIC +3V tf < 20ns
50Ω GND V- 50%
35pF INPUT
1kΩ 0V
tON(EN) tOFF(EN)
-15V
+15V 0V
10%
SWITCH
V+ OUTPUT
EN NO1B -5V
NO1A-NO8A
NO2B-NO8B, 90%
A0 COMA VOUT
A1 MAX307
A2 COMB VOUT
50Ω GND V-
35pF
1kΩ
-15V
_______________________________________________________________________________________ 7
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
_________________________________Test Circuits/Timing Diagrams (continued)
MAX306/MAX307
+15V
V+ tr < 20ns
+2.4V EN
LOGIC +3V tf < 20ns
50%
A0 INPUT
NO1-NO16 +5V 0V
A1
A2 VOUT
MAX306 80%
A3 SWITCH
COM VOUT OUTPUT
GND V-
35pF
300Ω 0V tOPEN
50Ω
-15V
+15V
RS
NO1-NO16 V+ +3V
LOGIC
EN OFF ON OFF
INPUT
0V
VS A0
CHANNEL COM VOUT
SELECT A1
A2 MAX306
A3 ∆VOUT
CL = 1000nF
VOUT
GND V-
∆VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
-15V
Q = CL = ∆VOUT
8 _______________________________________________________________________________________
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
_________________________________Test Circuits/Timing Diagrams (continued)
MAX306/MAX307
+15V 10nF
+15V 10nF
VOUT
VIN NO1 V+
NO1 V+
NO2
RL =
RS = 50Ω
NO16 1kΩ
NO16
A0 COM VOUT
A0 COM
A1 RS = 50Ω
MAX306 A1
A2 RL = 1kΩ MAX306
A2
A3
GND EN V- A3
GND EN V-
10nF
-15V 10nF
-15V
VOUT
OFF ISOLATION = 20log VOUT
VIN CROSSTALK = 20log
VIN
+15V
V+
A3 NO1
CHANNEL A2 Meter
SELECT A1
MAX306 NO16 Impedance
Analyzer
A0
COM
GND EN V- f = 1MHz
-15V
_______________________________________________________________________________________ 9
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
________Pin Configurations/Functional Diagrams/Truth Tables (continued)
MAX306/MAX307
TOP VIEW
V+ 1 28 COM
ON
N.C. 2 27 V- A3 A2 A1 A0 EN
Switch
N.C. 3 26 NO8 X X X X 0 None
NO16 4 0 0 0 0 1 1
25 NO7
0 0 0 1 1 2
NO15 5 24 NO6 0 0 1 0 1 3
0 0 1 1 1 4
NO14 6 MAX306 23 NO5 0 1 0 0 1 5
0 1 0 1 1 6
NO13 7 22 NO4 0 1 1 0 1 7
NO12 8 21 NO3 0 1 1 1 1 8
1 0 0 0 1 9
NO11 9 20 NO2 1 0 0 1 1 10
1 0 1 0 1 11
NO10 10 19 NO1 1 0 1 1 1 12
1 1 0 0 1 13
NO9 11 18 EN 1 1 0 1 1 14
GND 12 17 A0 1 1 1 0 1 15
1 1 1 1 1 16
N.C. 13 16 A1
MAX306
A3 14 15 A2
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
DIP/SO
TOP VIEW
V+ 1 28 COMA
COMB 2 27 V-
N.C. 3 26 NO8A ON
A2 A1 A0 EN
Switch
NO8B 4 25 NO7A
X X X 0 None
NO7B 5 24 NO6A 0 0 0 1 1
0 0 1 1 2
NO6B 6 MAX307 23 NO5A 0 1 0 1 3
0 1 1 1 4
NO5B 7 22 NO4A
1 0 0 1 5
NO4B 8 21 NO3A 1 0 1 1 6
1 1 0 1 7
NO3B 9 20 NO2A 1 1 1 1 8
DIP/SO
10 ______________________________________________________________________________________
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
________Pin Configurations/Functional Diagrams/Truth Tables (continued)
MAX306/MAX307
V+ V- GND
TOP VIEW
COMB
COMA
NO8B
NO8A
N.C.
V+
V-
NO1A
NO2A
4 3 2 1 28 27 26
NO3A
NO4A
NO5A COMA
NO7B 5 25 NO7A NO6A
NO6B 6 24 NO6A NO7A
NO8A
NO5B 7 23 NO5A NO1B
MAX307 NO2B
NO4B 8 22 NO4A NO3B
NO3B 9 21 N03A NO4B
NO5B COMB
NO2B 10 20 N02A NO6B
NO1B 11 19 N01A NO7B
NO8B
12 13 14 15 16 17 18 CMOS DECODERS/DRIVERS
GND
N.C.
N.C.
A2
A1
A0
EN
PLCC A0 A1 A2 EN
N.C. = NO INTERNAL CONNECTION MAX307 8-CHANNEL DIFFERENTIAL MULTIPLEXER
______________________________________________________________________________________ 11
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
__________________________________________________________Chip Topographies
MAX306/MAX307
MAX306 MAX307
EN A0 A1 A2 A3 N.C.
EN A0 A1 A2 N.C. N.C.
0.184"
0.184"
(4.67mm)
(4.67mm)
GND
GND
NO3 NO11
NO3A NO3B
N04 NO12
N04A NO4B
NO5 N013
NO5A N05B
NO6 NO14
NO6A NO6B
NO7 NO15
NO7A NO7B
NO8 NO16
NO8A NO8B
N.C.
COMB
V- COM V+
V- COMA V+
0.078"
0.078"
(1.98mm)
(1.98mm)
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600
© 1994 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.