You are on page 1of 16

Aerospace Industry

PURE TECHNOLOGY System partner

www.moriseiki.eu

5-Axis-machining - Engine component

MORI SEIKI

Aerospace Industry

2|3

The aerospace industry is the technology driver for the modern economy - MORI SEIKI is your partner.
The aerospace industry combines nearly all of the high technologies of the information age: electronics, robotics, measuring, controls, materials and control technique. MORI SEIKI has adapted to these demands for a long time and is constantly developing specic solutions for this industry. Whatever the demands, our engineering and application teams make sure you get highly efcient, made to measure solutions.

| 1 landing frame demands the highest technique | 2 represents a high efcient turbo engine | 3 turbo engine in use

Component spectrum
Made to measure solutions for your production.

Horizontal machining of an aircraft frame

MORI SEIKI

Aerospace Industry

4|5

Made to measure solutions for your production from classic materials to titanium and inconel.
For years MORI SEIKI has been a systems partner for the aerospace industry. Through constant development of modern production solutions for the various structures and parts for turbines we have become specialists in the industry.

| 1 complete machining of a landing gear axle | 2 structure part | 3 landing gear axle made from inconel | 4 turbo engine impeller | 5 turbo engine casing

Systems Partner
Know-how, worldwide quality standards and a reliable network of technical engineers.

Service and Maintenance


Optimal support in service, operation, maintenance and spare parts supply guarantee the best in reliability.

Management support
MORI SEIKI supports and offers advice in various areas, for example investment planning or relocation in production.

MORI SEIKI

Aerospace Industry

6|7

Aerospace Systems Partner know-how, worldwide quality standards and a reliable network of technical engineers.
MORI SEIKI not only offers aerospace production techniques from a range of more than 200 machining centres, but also a worldwide network of professionals that can offer you advice from tool selection and programming to installation and maintenance. Our engineering team continuously works on offering customer specic complete solutions. MORI SEIKI offers solutions for a problem free production start.

Technical Support
We offer you solutions for your production. From programming and tool selection to test cutting and installation.

CUSTOMER

Production Support
Process solutions are constantly being optimised. Our application technicians are always available for all questions and problems in production.

Products
The right product for your production.

5-Axis Machining Centres

NMV Series 5-Axis machining with direct drive system at the rotary axes.
NMV Series Facts:
| DCG technology and excellent Box-in-Box construction with zero overhang | High-rigidity table with DDM (Direct Drive Motors) at the B- and C-axes | B-axis-indexing range 340 and full C-axis rotary table up to 1,200 min-1* | Revolutionary Octagonal Ram Construction (ORC) supports high-speed and precision feed at the Z-axis | MAPPS III: simple conversational functions, 3D interference checking function
*optional NMV5000 DCG

Technical Details
Axis travel X-/ Y-/ ZMax. travel C-/B axis Table work surface Max. workpiece size Max. workpiece weight Max. spindle speed Rapid traverse rate
[ ] optional

NMV5000 DCG
mm mm mm kg min-1 m/min min-1 730/510/510 360/340 500 700 x 450 300 12.000 [20.000] X, Y: 50, Z: 40 C: 120 [500, 1.200], B: 35 [50]

NMV8000 DCG/40

NMV8000 DCG/50
1.200/920/610 360/340 800 1.000 x 500 1.000

12.000 [20.000] X, Y, Z: 40 C: 100, B: 25

10.000 [15.000]

MORI SEIKI

Aerospace Industry

8|9

Horizontal Machining Centres

NH Series Horizontal machining centres with remarkable technique and automation.

NH Series Facts:
| Choose from 4 pallet sizes to meet all customers needs | DCG technology and Box-in-Box construction offer low vibration and good acceleration | Full 4th axis rotary table with Direct Drive Technology (DDM) and minimum table indexing range 0,001* | Wide variety of automation solutions with MORI SEIKIs Pallet Pool Systems | MAPPS III: simple conversational programming
*optional

Technical Details
Axis travel X-/ Y-/ ZPallet working surface Max. workpiece weight Max. Spindle speed Rapid traverse rate X/Y/Z No. of tools Spindle drive motor mm mm kg min-1 m/min capacity kW

NH5000 DCG
730 / 730 / 850 500 x 500 500 [700] 14.000 [20.000] 50 40 [-240] 22/18,5

NH6300 DCG
900 / 800 / 980 630 x 630 1.200 10.000 [8.000] [15.000] 50 40 [-330] 30/25

NH8000 DCG
1.400 / 1.200 / 1.350 800 x 800 2.000 10.000 [8.000] [15.000] [18.000] 50 40 [-330] 30/25

| 1 horizontal machining of an aircraft frame | 2 NC rotary table with 2 Direct Drive Motors | 3 effective cutting optimised for your needs

Products
The right product for your production.

Integrated Mill Turn Centres

NT Series no compromise integration of milling and turning machining.

NT Series Facts:
| Complete machining with a maximum of 2 spindles and 2 turrets for 9 controlled axes | DCG Technology at the X- and Z-axis | Sturdy column with Box-in-Box construction and octagonal ram (ORCTM) at the Y-axis for extreme rigidity | B-axis with DDM (Direct Drive Motor) with a rotation range of +/- 120 | MAPPS III with 3D interference checking function

Technical Details

NT3100 DCG

NT3150 DCG 52 1.022 600 6.000* 12.000 685 / 125

NT3200 DCG 65 1.022 600 5.000* 12.000 685 / 125

NT4200 DCG 65 1.596 660 5.000* 12.000 750 / 210

NT4250 DCG

NT4300 DCG

NT5400 DCG

Max. bar diameter mm 40 Max. machining length mm 1.022 Max. machining diameter mm 600 Max. spindle speed min-1 6.000 (8.000)* Max. tool spindle speed min-1 12.000 Axis travel X- /Ymm 685 / 125 MAPPS III High-Speed-Programming

80 90 103 1.562 1.518 1.800 660 660 920 4.000* 3.000* 2.400* 12.000 12.000 8.000 750 / 210 750 / 210 1.040 / 255 *applies also for sub spindle, depending on design

MORI SEIKI

Aerospace Industry

10 | 11

CNC Multi-Axis Turning Centres

NZ Series complete machining with up to 3 turrets each with Y-axis.


NZ Series Facts:
| Up to 3 built-in motor turrets (BMT) for max. 48 direct driven tool stations | Simultaneous machining with max. 3 turrets and 3 programmes | Excellent milling performance up to 3 Y-axes with the longest strokes in its class (110 mm) | MAPPS III: simple conversational automatic programming with 3D interference checking function
Technical Details
Max. machining diameter Max. machining length Max. bar diameter Axis travel X-/ Z-/ Y-/ B- (spindle 2) Max. spindle speed Max. rotation of the driven tools
[ ] optional

NZ1500T3Y3
mm mm mm mm min-1 min-1 320 260 52 210 / 300, 810 / 110 / 920 6.000 6.000 [12.000]

NZ2000T3Y3
320 260 65 210 / 300, 810 / 110 / 920 5.000 6.000 [12.000]

AMRC University in Shefeld

Cooperation the application of new materials such as titanium or inconel at the highest level.
The Advanced Manufacturing Research Centre in Shefeld works closely with our engineering department and together they develop new highly productive production techniques. For the past few years Shefeld has been manufacturing on MORI SEIKI NT machines and with this, new materials such as titanium and inconel have been predominantly used.

Automation
The right solution for all purposes.

| 1 Linear Pallet Pool system for large-variety production | 2 combination of lathes and machining centres for automated complete machining | 3 Carrier Pallet Pool systems with various congurations available

MORI SEIKI

Aerospace Industry

12 | 13

Automation Free-Style Engineering competence combined with a wide range of automation solutions
Achieving competent automation solutions to meet customer demands has been the task for MORI SEIKI for years. With an engineering team, that has a world-wide network of experience and know-how in diverse industries. There are complete congured solutions (CPP) as well as totally individual designed systems (LPP) available. MORI SEIKI is with you from the planning, installation and implementation to the integration of your network.

Choose to suit your needs:


LPP Number of machines Number of workpiece setup stations Number of pallet stations Number of pallet shelves Up to 8 units Up to 5 sets Up to 99 stations 2 levels CPP Up to 2 units Up to 2 sets Up to 29 stations 1 level

Scale

Contact
Always near by.

MORI SEIKI Technical Centres and Sales and Service partners

GERMANY MORI SEIKI Stuttgart Antoniusstrae 14, 73249 Wernau Tel. +49 (0) 7153 934 0 MORI SEIKI Hamburg Merkurring 63 - 65, 22143 Hamburg Tel. +49 (0) 40 69 458 0 MORI SEIKI Dsseldorf Siemensring 19, 47877 Willich Tel. +49 (0) 21 54 88 59 0 MORI SEIKI Mnchen Frankfurter Ring 117, 80807 Mnchen Tel. +49 (0) 89 35 744 0 MORI SEIKI Frankfurt Borsigstrasse 20, 66205 Wiesbaden Tel. +49 (0) 6122 92 777 0 FRANCE MORI SEIKI FRANCE S.A.S Paris Parc du Moulin, 1, Rue du Noyer BP 19326 Roissy en France, 95705 Roissy CDG Cedex Tel. +33 (0) 1 39 94 68 00 MORI SEIKI FRANCE S.A.S Toulouse 6, Impasse Lonce Couture 31200 Toulouse Tel. +33 (0) 5 3425 29 95 MS SYFRAMO S.A.S. Chassieu 81, Avenue du Progrs, 69680 Chassieu Tel. +33 (0) 4 78 90 95 95 MS SYFRAMO agence de Vougy 40, Rue du Stade, 74130 Vougy Tel. +33 (0) 4 50 18 03 43

REPMO 377, Avenue du Prsident-Wilson 93214 Saint-Denis Tel. +33 (0)1 49 46 61 45 SCOMO Parc dactivits St-Martin-du-Touch 4, Rue Marius Terc, 31300 Toulouse Tel. +33 (0)5 61 78 85 85 SEVMO Rue Eiffel-CP 4007, 44806 Saint-Herblain Tel. +33 (0)2 40 92 09 09 ITALY MORI SEIKI ITALIANA S.R.L Milano Via Riccardo Lombardi N. 10 20153 Milano Tel. +39 02 48 94 921 BENEDETTO RUTIGLIANO S.R.L. S.S. 96 KM 115+750 70026 Modugno (BA) Tel. +39 080 5356 802 Essedi S.p.A. Via dell Artigianato, 1, 25080 Molinetto di Mazzano (BS) Tel. +39 030 2120 453 FM Macchine S.r.l. Via Tamigi, snc - 65016 Montesilvano (PE) Tel. +39 085 4683 818 H.T.M. S.r.l. Via di Le Prata, 146, 50041 Calenzano (FI) Tel. +39 055 882 6660 Micron S.p.A. Via Enrico Fermi, 7, 35030 Veggiano (PD) Tel. +39 049 900 6611

Moreno Macchine Utensili S.r.l. Via Grecia, 10 - 41100 Modena (MO) Tel. +39 059 418 611 Prisma Macchine Utensili S.p.A. Via Presolana, 9 20021 Baranzate di Bollate (MI) Tel. +39 02 356 4025 Sirtech S.p.A. Via Casilina Km. 131, 600 03030 Piedimonte San Germano (FR) Tel. +39 0776 4020 87 Tecno Control S.r.l. Strada per Carrone, 30 10019 Strambino (TO) Tel. +39 0125 637581 Tecnologia ed Automazione Industriale S.r.l. Via Ghisalba, 13 - 20021 Bollate (MI) Tel. +39 02 3830 6184 UK MORI SEIKI (UK) LTD. London 202 Bedford Avenue Slough SL1 4RY Tel. +44 (0) 870 240 9500 MORI SEIKI Birmingham 4060 Lakeside, Solihull Parkway, Birmingham Business Park BIRMINGHAM B37 7YN Tel. +44 (0) 870 240 9500

Europe-wide reliability. MORI SEIKI support with an overall network throughout Europe. Contact your regional partner.

SPAIN MORI SEIKI ESPAA S.A. Barcelona Calle de la Electronica, Bloque B, Nave 9 Poligono Industrial La Ferreria 08110 Montcada I Reixac (Barcelona) Tel. +34 93 575 36 46 Juan Martin, S.L. Isaac peral, 6 08960 San Just Desvern (Barcelona) Tel. +34 933 715389 LM-Machinery S.L. C amino de Portuexe, 27 20018 San Sebastian Tel. +34 943 331000 CZECH REPUPLIC MORI SEIKI GmbH Prague 6th oor of building No. 423, Evropska 178, 160 00 Praha 6 Tel. +420 224 362 777 Newtech s.r.o. Evropska 423/178, 160 00 Praha 6 Tel. +42 02 3309 0451 MORI SEIKI Sales & Service partners AUSTRIA CNC-PROFI Maschinen-Handels GmbH Josef-Jessernigg-Strae 16 2000 Stockerau Tel. +43 2266 67740 BELGIUM Landr Machines NV Warandestraat 2, 9240 Zele Tel. +32 2 257 1930

DENMARK C. Henriksen & Co. Baldersbuen 57, PB216 2640 Hedehusene Tel. +45 46 590 566 FINLAND Nugget Oy Ormuspellontie 7, PL121 00701 Helsinki Tel. +358 9 350 5380 GREECE TechGroup 425, Thivon Ave. & 4, Galeriou St, 131 21 Athens Tel. +30 210 57 85 470 HUNGARY Wamatec Hungary Kft. 2040 Budars, Gyr u. 2 - BITEP Tel. +36 23 503 933 IRELAND Lister Machine Tools Ltd. PO Box. 838 Bluebell Industrial Estate, Dublin 12 Tel. +353 1450 8866 LITHUANIA Stevila Mokolai 68460 Marijampole Tel. +370 343 918 01 NETHERLANDS Landr Machines BV Lange Dreef 10, 4131 NH Vianen Tel. +31 3473 29 371 NORWAY BERGSLI METALLMASKINER AS Bedriftsveien 64 Kjrbekk 3735 Skien Tel. +47 35 50 35 00

POLAND APX Technologie Sp.z.o.o Al. Jerozolimskie 424A 05-800 Pruszkw Tel. +48 22 759 62 00 PORTUGAL Juan Martin LDA Joao Pereira Venancio, Loja 4 2430 Marinha Grande Tel. +351 244 568610 ROMANIA S.C. Tezmaksan International s.r.l. Calea Victoriei Nr. 85, Bl. 1, Et. 1, Ap. 4, Sector 1, Bucharest Tel. +40 21 3139313 SLOVAKIA Newtech s.r.o. Sturova 5/9, 017 01 Povask Bystrica Tel. +421 424 340 611 SLOVENIA BTS Company D.O.O. Bratislavska 5, SLO-1000 Ljubljana Tel. +386 1 5841 400 SWEDEN Lundwalls AB EA Rosengrens Gata 5 -Box 2105 S-42102 Vastra Frlunda Tel. +46 31 348 98 00 SWITZERLAND Josef Binkert AG Grabenstrasse 1, CH-8304 Wallisellen Tel. +41 44 832 55 55

www.moriseiki.eu

You might also like