Professional Documents
Culture Documents
Symbols Editor:
The Symbols Editor is a program designed to allow users to create their own custom ISOGEN symbols. It utilizes the project managers option for User Defined Symbols in such a way that allows the user to have both the normal standard ISOGEN images as well as their own custom creations. This is because the symbol editor uses SKEYs (Symbol Keys) to define each symbol in the Symbols Editor database. An SKEY is a 2 to 4 letter long shortcut that can be used in the ISOGEN parameters of CADWorx. A full list of all available SKEYs can be found in the CADWorx directory under Plant/Isogen/Isogen_Utils/Skeys.pdf Any new SKEY that is created must have a different SKEY from any other one that is already being used by ISOGEN. The system will alert you if you have entered an SKEY that is already in use (including those you have created).
Youll need to make sure that youre drawing your new symbols within their respective categories. Since well be drawing a support, well want to click the first drop down menu and select support. (Supports and spindles are different from most other categories. Spindles and supports must be drawn on their side, rather than right side up):
Next you will want to select the Symbol menu bar, and then select New Create a New Symbol in the Current Set:
Once you select this option, youll notice the Add New Symbol window that has popped up:
The system wants you to tell it what Old Symbol Key (what previous symbol) you would like to use as a base for the settings for the new one. Click the browse button [] to the right of the Old Symbol Key text box, and then select GUID - Guide type support:
Next you should type in your 2 to 4 letter SKEY in the New Symbol Key text box. I will be using SH01 in this example:
The Spindle Key option allows you to select what type of spindle graphic you would like to have in your drawing (after adding a spindle point). This is mostly used for things like valves, etc. Once your Add New window looks like this, click Create Symbol. Your screen should now look like this:
Done - Ends the drawing process Erase - Wipes the screen clean.
TP - Tapping Points SP - Spindle Point End - End Point Insul - Insulation Trace - Same Circle - Draw a circle Arc - Draw an arc Undo Removes the last thing drawn Flip Rotates the drawing horizontally or vertically Snap Snaps your lines to the grid (on/off) Char - Draw lines
You can click anywhere on the grid to begin drawing. Remember to select the snap button if you want your lines to start snapping to the grid. Once you click the first time, a green circle will appear. This is your Start Point. It can be moved later if you want. Once youve placed your Start Point, you can move your mouse to trace out a line. Click the left mouse button again to create the line. Take a look at the next few examples:
Remember: The symbol editor requires that you draw your spindles and supports sideways, instead of the normal up and down fashion. Top and Bottom markers as well as the End Point
Once youre finished drawing, hit the done button on the left hand side bar:
Now that youve hit done, youll need to save the Current Set youre working in. Its very important to select Save As almost all the time even if youre updating a set:
Then youll need to tell ISOGEN where to find this file by using project manager, selecting your specific ISOGEN template, and changing the User Defined Symbols option under the Drawing Control tab. Click in the space next to User Defined Symbols, then click browse and search for the file you saved earlier. See next page for image.
Once its in project manager, its time to use it in a drawing. Top of the line and the Bottom of the line.
Youll also notice that in order for the symbol to come up underneath the line, we had to draw it on the left hand side of the Start Point. Remember the earlier examples which displayed the Top and Bottom orientation. The End Point (red circle) is above the Start Point (green circle). When we switch that to below the Start Point, the symbol will flip so that it will be oriented correctly on the other side.
In order to copy a symbol, all we need to do is have the symbol we want to copy open. Next well select the Symbol menu bar, and then select New. In the Add New Symbol box, fill in all the boxes like we did before including the NEW Symbol Key (make sure its different). This time however, click on the check box with Copy Symbol from next to it, and then select screen.
This will then create a new symbol that will be an exact copy of the one that was previously on the screen. If youre concerned that you arent working on a new symbol, look up at the second drop down bar. It will say New SKEY: ****. If **** is the SKEY you just entered for this new symbol, youre in good shape. Once you have the copied symbol, youll need to change the End Point so that it will come up correctly in the isometric. Hit the undo button on the bar to the left which will erase the current End Point. (Youre only allowed one End Point per symbol. This is something that Symbol Editor will be happy to remind you of.) Now hit the End button on the left hand menu bar, and select below the start point. If it looks like the circle is off center, you may not have snap turned on. If so, hit undo, then snap, then try again by hitting End button again, and replacing the End Point.
It should look like this when youre done: By switching the orientation of the End Point, the symbol has come in correctly in the ISOGEN drawing. This copy and move process prevents you from having to draw a new symbol.
This will bring you back to the main window where you will notice two more menu items on the top bar: DELETE and MOVE: DELETE:
Symbol Deletes the symbol youre drawing from the current set of symbols completely. Line Deletes specific lines that you can choose by clicking on them. This process is the same for Spindle, Tapping, etc. Read below for additional information on Delete.
MOVE:
Within grid Allows you to move the whole symbol around the grid. To Origin Places the whole symbol as close the bottom left hand corner as possible. Start Point Move the start point to a new location. This process is the same for End Point and Spindle Point.
Once you are done editing your symbol, hit the Done button at the top of the left hand side bar. Always make sure to Save As your symbols even if youre just planning on overwriting a file you made yourself. The Save command doesnt always work.
ACTION LIMIT:
The Symbol Editor has an action limit of 200. Every line you draw counts as one action. So if you drew a box consisting of four lines, that would be four actions. Its important to use the undo command if you want to erase those lines. This is because symbol editor allows you to delete lines using the delete command menu, but it will count deleting a line as one action. That means that if you drew a box with four lines, thats four actions. If you deleted those lines using the delete command menu, thats four more actions for a total of eight actions on the current symbol. Its easy to get carried away drawing a new symbol, using the delete command to erase unwanted lines, redrawing those lines, and suddenly hit the 200 action limit. At that point, youll need to hit undo several times to restore some actions to you.
FLWN Weld Neck Flange (new SKEY ECAD for testing purposes)
Matthew Peters