Professional Documents
Culture Documents
Valve Actuator
For use with Actuator Valve Bodies
Sizes: Universal
Valve Actuators are four-wire actuators designed to be used with Watts Actuator Valve Bodies.
Specifications
Actuators are normally closed and will open when power is applied. Travel time for the actuators is approximately 90 seconds to close the end switch. Each actuator has four wires: two for power, two for an end switch (see wiring diagrams). A typical 40-VA transformer can power 12 actuators. Technical Details Voltage Amperage Power Endswitch Rating Minimum Ambient Temperature Maximum Ambient Temperature Minimum Storage Temperature Maximum Storage Temperature Valve Travel Time Blue/Brown Wire Black/Black Wire 24 VAC 700 mA (0.7 A) 2.5 VA (2.5 W) 175 W 32F (0.0C) 122F (50.0C) -77F (-60.5C) 140F (60.0C) 90 Seconds 24 VAC End Switch
Manifold Actuators
Actuator
Installation Parameters
Connect the thermal actuator to the valve using the threaded swivel connector. Make the wiring connections according to the wiring diagrams.
Brown lead Blue lead
Order # 0955323
CAUTION
This Engineering Sheet is not intended to provide full installation instructions and safety information. In order to avoid property damage or injury, please refer to the complete installation manual and product safety information provided with the product.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Thermostat
Actuator
Neutral
USA: No. Andover, MA Tel. (855) 699-2887 Fax: (978) 794-1848 radiant.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 radiant.watts.com