Professional Documents
Culture Documents
The lower limit of the integral in the condition of convergence of f for it to have a mathematically valid Laplace Transform takes care of any discontinuityone like delta function. The 1 is abscissa of absolute convergence. |f(t)| < Mexp(t), which implies the function converges for all 1 > , also gives the region of convergence. Poles and zeroes are critical frequencies. Steady state/final value is found by final value theorem stated as
Simple pole of Y(s) at origin is allowed, but repeated poles at origin, in right half plane and on imaginary axis are excluded. Damping Ratio : is always in multiplication with natural frequency and arises from the coefficient of y' (degree and order 1). The equations below is laplace transform of second order equation of oscillations of y(t).
= b/{2 sq root(kM)} decides how the system oscillations damp: >1 means over damped and real roots; <1 means roots are complex and system is underdamped; =1 means critically damped where the roots are reapeated and real.
As frequency is kept constant changes with it in circular manner. From here on, there will be no reference to , because only the nature of each root implicitly implies it. When the root s2 is complex conjugate of s1, residue k2 is complex conjugate of k1. This has particular implication on Inverse Laplace of Y(s). For = arc cos()
The graphical evaluation(Euler's Identity and basics of vectors combined with subtle intelligence).
With Y(s) given, y(t) can be found to look like familiar exponential form
Effect of position of poles and zeros in s-plane over the response: adjusting value in power of e above alters the envelope and hence the response of the transient.
So, apparantly, as the moves further towards left, s moves to left implying a faster damping. Remark: systems are designed from these mathematical resultsthese are the options we are provided with to design. For example, one will now think of something which will be capable of moving roots to left to form a system which performs variation of damping. The case of many complex poles: the overall response is a combination of all these. The magnitude of each pole is represented by respective residues in s-plane graphical analyses.
The Transfer Function of Linear Systems Definition: ratio of laplace transform of output variable to the input variable, assuming all the initial conditions zero. This represents the relationship describing dynamics of system(or element). This maybe defined only linear and stationary system. Transfer function is an input-output relationship, implying it gives no information about the internal design details of the systems. Inference: the black-box study is best done in these terms with internal design being independent of care for it. The impedance model is based upon laplace only and it lets you treat every element in lumped manner with simple rules of parallel and series connections applicable. So, eventhough the sysmbols like R, Cs show up in transfer function, they still convey little information about the actual internal design. Any output response is sum of natural response(due to initial conditions) and forced responsedetermined by the input. Y(s) = m(s)/q(s) + R(s)p(s)/q(s); q(s) = 0 is characteristic equation. The transient response has q(s), while the steady response will be free of q(s).
the transfer function (s)/V(s) is of a DC Motor linearized by considering armature current Ia constant. Transfer function means linear functionnot only superposition, but also homogeinity can be small signal too. It is a choice for analysis of blackbox, across its terminals, its ports.
In the transfer function above, id does not even show... An amplidyne is a special type of motor-generator which uses regeneration to increase its gain. Energy comes from the motor, and the power output is controlled by changing the field current of the generator. In a typical generator the load brushes are positioned perpendicular to the magnetic field flux. To convert a generator to an amplidyne you connect what would be the load brushes together and take the output from another set of brushes that are parallel with the field. The perpendicular brushes are now called the 'quadrature' brushes. This simple change can increase the gain by a factor of 10,000 or more. Vacuum tubes of reasonable size were unable to deliver enough power to control
large motors, but vacuum tube circuits driving the input of an amplidyne could be used to boost small signals up to the power needed to drive large motors.
Block Diagram Models Dynamic systems which comprise automatic control systems are given by a series of differential equations. One thing to always keep in mind is that order of differntial equation has got nothing to do with its linearity or even systems. Keeping the power of any term in the differential equation to 1 only helps avoiding the convolution which would then introduce composite frequencies. Control systems are concerned with controlling few variables, and hence controlled variables must relate to controlling ones. Block diagram consist of unidirectional operational blocks which represent transfer function of variable of interest. For J inputs and I outputs we have a transfer fucntion with IxJ dimention matrix. Y = GR refer to table 2.6 on page 81.
When systems are cascaded, there can be loading or coupling of the blocks. In that case, right transfer functions need to be calculated by the engineer. Block diagrams discretize the effects into lumped unitsmake it easy to understand how to reduce and where to add more units. Signal Flow Control Graphs block diagrams fail to help when systems grow beyond a certain complexity. The advantage of line path method is flow graph gain formula which renders all the reduction methods
useless. Signal flow graph too is a representation of linear relations. A branch relates the dependency of an output over input in the same way as the block does. Summation of all the signals entering a node(signal) is equal to node variable. A path is a branch or a set of branches between a node to another. A loop is a closed path with no node met twice except the one at which it ends; two loops are non-touching if they have no common node. Linear Dependence: Mason's signal flow gain formula for xi independent and xj dependent variables is given as
A is nxn matrix while B is nxm. The differential equation related the rate of change of state to the present state and inputs. The outputs of a linear system can be related to state variables and inputs through output equation y = Cx + Du, where y is output column vector. Taking laplace transform of eq (3.16) and then taking inverse laplace to solve for x(t) gives
(t) = exp(At) is what gives unforced response and is called fundamental or State transition Matrix. It converges for a finite t and all A.
Signal Flow Graph and Block Diagram Models State of the system gives the dynamics of it only when it can be explained with a set of differential equations. Oftentimes, finding the correct set of differential equations is tough. There is a signal flow diagram and block diagram corresponding to each set of state variables. This puts the very fact clearly that there can be more than one graphs for a single transfer function.
An n order transfer function means n state variables. This method, needless to mention, creates only the graphs with all loops touching. While designing a system, this constraint might seem way too much. Still, let's continue.... This designing based upon deciding state variables from transfer function, signal flow diagram or the block diagram revolve around Mason's Signal Flow Gain formula's propertieswhich are for Path factor and determinant in denominator. General form of flow graph state model and block diagram model below is phase variable
canonical form.
x1, x2, x3 ... are phase variables. The very fact that there are more than one state models possible and hence signal flow graphs and block diagrams only means that no signal flow graph can be seen as a rigid universal formone can distort then for analysis until the transfer function doesn't change.
Transfer Function From State Equation Columns in matrix B of a state equation tells the number of inputs. For SISO, it is always nx1. G(s) = C(s)B + D, where (s) = [sI A]^(-1). This can be obtained through simple manipulation of laplace of State Equations in matrix form. Designs can be sequential, parallel etc. Disk drive read system is a sequential design.
E(s) = R(s) Y(s) is tracking error. Also, Sensitivity function S(s) is defined as 1/{1 + L(s)} and Complimentary sensitivity function C(s) is defined as L(s)/(1 + L(s)). For tracking error to be minimum, we need both S(s) and C(s) to be minimum. Td is disturbance and N is measurement noise. Also note that S(s) + C(s) = 1 Tracking error cannot be analyzed without understanding of the very meaning of a transfer function's being small or large. |L(j)| for the range of frequencies, , of interest defines modulous of Loop Gain L(s). Range of frequecies of interest: the E(s) equation makes it an apparent conflict that to reduce the effect of disturbance Td L(s) must be made large for a given G(s) by selecting apt Control Gc(s) and to reduce the effect of Noise N(s), L(s) cannot be soaring too high. Fortunately, this conflict is resovled by making L(s) high for low frequencies which affect disturbance Td and making it low for high frequencies which affect N(s). Next, we need to address how feedback can be helpful in reducing sensitivity of the system to the variations in the parameters in process G(s).
Sensitivity of Control Systems to Parameter Variation Supposing Td(s) = N(s) = 0 and making Gc(s)G(s)>>1 for all frequencies of operation gives Y(s) ~= R(s), or say input somewhat equal to the output. This is the case with buffer circuit of Opamp. Although doing this makes the system very oscillatory, yet the very result that increasing Loop Gain somewhat reduces the effect of G(s) is exceedingly useful.
We are still relying on the principle of superposition. Larger L(s) also means a reduced sensitivity. Although. Question remains how we define
sensitivity.
Disturbance Signals in a feedback Control System The smaller the sensitivity, the lesser the effect of signal. For disturbance rejection, we need large loop gain over the frequencies of interest. This means designing a Gc(s) for low sesitivity for low frequencies Measurement Noise Attenuation for L(s) << 1, C(s) ~ L(s). And we say that small loop gain leads to good noise attenuation. Low loop gain must be provided by means of Gc(s) in case of high frequencies for this. Control of Transient Response it is the response of system as a function of time. The ambiguity comes when we consider the fact every function can be a function of time. What we are considering here is a function whose value changes when we change the time. An open loop system is made suitable by inserting a cascading Transfer function Gc(s); closed loop can be made suitable by altering feedback parameters. Controlling time constants affects this response. Steady state error value of G(s) for s = 0 is called DC gain and usually greater than 1. This implies open loop systems will have significant steady state error due to L(s = 0), steady error for closed loop systems can be reduced blow 1.