You are on page 1of 3

Fuel level sensor DUT-E is designed for precision fuel level measurement in all kinds of vehicles tanks, also

in tanks of fixed installations. DU-E is used as a standard fuel level sensor or as an additional sensor to be used with AVL, FMS, tank monitoring systems or vehicle tracking systems. DUT-E as a part of telematics system is used:

to obtain the reliable information about current fuel volume in vehicle tank; to define the vehicle fueling volume; to detect the fuel theft from the tank; to carry out the remote tank monitoring; to determine the fuel consumption.

EASY MOUNTING, PRECISE MEASUREMENT

Features

Electrical noninteraction with the tank body; Allows cutting "at place" up to 30% of its initial length without recalibration (analog and frequency models); Protection of fuel level sensor output from short circuit; Protection from overvoltage (up to 100 V); Sensors are delivered calibrated, i.e. devices are interchangeable and there is no necessity to make tank calibration when you replace DUT-E sensor; Stable and exact output signal; Bayonet lock and small overall dimensions of the outside sensor part; Possibility of sealing.

Specification

Operating principle Measurement inaccuracy Supply voltage Operating temperature Current consumption

Output signal

Capacitive 1% 10..50 V, protection up to 100 V -40 ..+85 C < 10 mA DUT-E A5: analog, output voltage range 1.5 - 4.5 V; DUT-E A10: analog, output voltage range 2.5 - 9 V; DUT-E 485: digital, protocol DUT-E COM; DUT-E 232: digital, protocol DUT-E COM; DUT-E F: frequency output 500-1500 Hz. 2000, 1400*, 1000*, 700*, 500, 350, 250, 180

Length, mm

* - only specified lengths for DUT-E 232/485

Fuel volume control in vehicle tracking systems

DUT-E has 5 bolted flange and is mounted instead of standard fuel level sensor or into a special hole in vehicle fuel tank. It is recommended to install DUT-E in the geometrical center of a tank. It is necessary to carry out the tank calibration procedure after fuel level sensor DUT-E installation. As a result the conformity table of fuel volume in the tank to DUT-E output signal will be received. Tank monitoring system uses obtained dta to determine the fuel volume in the tank. DUT-E 232 and DUT-E 485 can generate fuel volume (in liters or in percentage of full tank) in the output message. The calibration table should be stored in the DUT-E memory by means of SK DUT-E service kit. Fuel level sensor DUT-E passes the information on raising or lowering fuel level or volume in tank to tracking device. Vehicle tracking system with the help of GPS determines the location and time. The user of a system receives information about changes in fuel level in the form of parameters or diagrams. Refueling or fuel theft dta may be presented in visual form.

Accessories

View

Purpose Designed for connection of vehicle's dashboard fuel level indicator with DUT-E A5 sensor. Can be applied with Fuel indicator interface another devices of fuel level measurement, which have analog output signal (from 1.5 to 4.5 V). unit UC-1

Name

UC-1-90 (90 Ohm, direct correlation);

UC-1-800 (800 Ohm, inverse correlation).

Can process signals from up to 4 frequency fuel level Summator for DUT-E F sensors and convert into analog signal. Is used in tank monitoring systems.

Fuel tank hole plug

Fuel tank hole plug is designed to be placed instead of DUT-E.

Warranty

Warranty period is 18 months from the date of installation or 24 months from the date of manufacturing.

Useful links

Fuel level sensor DUT-E reference. GeoNet GPS Solutions Fuel level sensor DUT-E reference. Marulatech Fuel level sensor DUT-E reference. LKW Kostowski d.o.o. Frotcom Macedonia Fuel level sensor DUT-E 485 reference. Fuel Minder Technologies Fuel level sensor DUT-E leaflet Photo of fuel level sensor DUT-E Certificate of Conformity to the electromagnetic compatibility requirements for analog DUT-E Certificate of Conformity to the electromagnetic compatibility requirements for digital DUT-E Setup Service DUT-E for fuel level sensors DUT-E 232 and DUT-E 485

http://www.jv-technoton.com/fuel_level_sensor/

You might also like