Professional Documents
Culture Documents
Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
Space-saving design Low profile -1.6 mm protrusion above the board. Lightweight -0.025 g. total weight.
sFeatures
1. Low insertion loss
0.1 dB typical at 6 GHz (not mated with the plug).
2. Space-saving design
2.7 mm x 2.7 mm occupied board space.
MS-156
3. Low profile
1.6 mm protrusion above the board.
4. Lightweight
0.025 g. total weight (without vacuum cap).
5. Durability
100 mating/unmating cycles, with corresponding plug.
sApplications
Portable terminals, ETC, notebook computers (Bluetooth), wireless LAN, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance.
2003.11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sProduct Specifications
Not mated with the plug Operating temperature range Rated power Frequency range Insertion loss
-40 to +85 2W DC to 6GHz 0.1 dB max.(DC to 3.0GHz) 0.15 dB max.(3.0GHz to 6.0GHz)
Mated (MS-156-HRMJ-3)
-40 to +85 2W DC to 6GHz 0.5 dB max.(DC to 3.0GHz) 1.2 dB max.(3.0GHz to 6.0GHz)
Isolation loss
20 dB max.(DC to 2.0GHz) 15 dB max.(2.0GHz to 4.0GHz) 13 dB max.(4.0GHz to 6.0GHz) 1.2 max.(DC to 2.5GHz) 1.3 max.(2.5GHz to 6.0GHz) 1.4 max.(DC to 3.0GHz) 1.8 max.(3.0GHz to 6.0GHz)
V.S.W.R
Item
1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Vibration 100 m ohms max. 1000 M ohms min.
Specification
100 mA max. 100 V DC
Conditions
100 V AC / 1 minute Frequency:10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 490 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis Temperature: -55 / +5 to +35 / +85 /+5 to +35 Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) 100 cycles 100 cycles
No electrical discontinuity of 1 s or more 5. Shock Contact resistance: 100 m ohms max. Insulation resistance: 10 M ohms min. Contact resistance: 100 m ohms max.
sMaterials
Part
Shell Insulator Common terminal Antenna terminal
Material
Phosphor bronze 9T Nylon Beryllium copper Phosphor bronze
Finish
Gold plating -------------------------Gold plating Gold plating
Remarks
-------------------------UL94V0 ---------------------------------------------------
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.5 1.0 1.5 1.8 V.S.W.R. 1.6 1.4 1.2 1.0 DC 3.0 6.0 [GHz]
qISOLATION
10 15 Isolation
Isolation [dB]
20 25 30 35 40
DC
3.0
6.0 [GHz]
V.S.W.R.
V.S.W.R.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sReceptacle
qWithout vacuum cap
N.O 0.4 M2.7
N.C
Part Number
MS-156
CL No.
358-0167-8
Packaging
2,000 pieces/reel
1.4
.7
Part Number
MS-156(02)
CL No.
358-0167-8-02
Packaging
1,500 pieces/reel
Note:Vacuum cap flat can be oriented in any direction. Orientation will not affect placement of the switch on the board.
BCircuit diagram
Not mated with the plug(N.C) G B G Plug G A C G MS-156 B G Plug Mated with the plug(N.O) G G A C G MS-156
N.O
1.25 1.05
2.9 2-2.65
N.C
0.3 0.55
1.4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPackaging Specifications
qReel dimensions
2,000 pieces/reel
4 4 2 1.75
1
5.5
12
180
2.2
Unreeling direction
qReel dimensions
1,500 pieces/reel
80
5.5
12
Unreeling direction
2.6
1max. 2.5min.
180
80
Unreeling direction
12.4
.5
1
.5
Unreeling direction
12.4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sPlugs
qPress down type
11.15 6 4
4C
20.9 2.9
3.2
Part Number
MS-156-C(LP)-1
CL No.
358-0173-0
10,000 Times
25.25 8.25 3
M8
Durability
0.5
3.2
Part Number
MS-156-C(LP)-2
CL No.
358-0174-3
Durability
500 Times
5.48 4.27
Part Number
MS-156-HRMJ-2
0.5
CL No.
358-0170-2
8.5
Durability
500 Times
0.5
1/4-36UNS-2A
Part Number
MS-156-HRMJ-5
CL No.
358-0177-1
8 .5
Durability
500 Times
M8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Part Number
MS-156LP-HRMJ-1
CL No.
358-0175-6
16.79 1/4-36UNS-2A
0.5
Durability
10,000 Times
3.4
1/4-36UNS-2A
Part Number
MS-156-HRMJ-3
CL No.
358-0171-5
Durability
10,000 Times
1/4-36UNS-2A
Part Number
MS-156-HRMJ-6
CL No.
358-0181-9
Durability
10,000 Times
qFloating type
31.06 20.7 4.27 2.5 15
10 5
3.4
24
1/4-36UNS-2A
2-2.6
Part Number
MS-156-HRMJ-9
CL No.
358-0180-6
Durability
10,000 Times
20
14
20
20
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Using Typical Solder Paste q Maximum temperature w Peak temperature time e Peak temperature r 200 min. t 150 to 160 Metal mask thickness Reflow cycles
40 sec.min. 50 sec.max. Time (sec.)
: 240 : 10 sec. max. : 220 to 235 : 50 sec. max. : 40 sec. min. : 0.12 mm : 2 cycles
100
50
10 sec.max.
Using Lead-free Solder paste q Maximum temperature w Peak temperature time e Peak temperature r 230 min. t 150 to 180 Metal mask thickness Reflow cycles : 250 : 10 sec. max. : 245 to 250 : 30 sec. max. : 60 sec. min. : 0.12 mm : 2 cycles
100
50
BPrecautions
1. Care should be taken to avoid accumulation of moisture inside the mounted receptacle after the washing process. 2. This product is intended to be used for circuit inspection only. Consult factory if any other application is considered. 3. The corresponding plug should be inserted in direction perpendicular to the switch mounting surface, within an angle of 2. The push-in force should be kept within 6-10 N. 4. Do not use hand soldering for mounting on the board. Doing so could result in solder and flux wicking to the contact portion. 5. When using a heat gun, hotplate, or similar methods, limit the temperature to 260 applied for 10 seconds max. 6. Consult Hirose if your application, installation methods or end-user environment are different than the recommended.
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.