You are on page 1of 2

For JMC25X/26X Gigabit/Fast Ethernet controller Copyright (c) JMicron Technology Corp 2009. All rights reserved.

The driver jmnd.dos is the NDIS2 driver for the Microsoft Network Client for DOS *** Required Files *** JMND.DOS OEMSETUP.INF PROTOCOL.INI the driver installation script SAMPLE configuration file

Microsoft Network Client 3.0 for MS-DOS *** Auto Installation Driver *** Follow these steps to install jmnd.dos for Microsoft Network Client for DOS 1. Start to install Microsoft Network Client. 2. select "Network adapter not shown on list below ...". 3. Enter the path where the files jmnd.dos and oemsetup.inf are located. 4. Select "JMicron(R) Gigabit/Fast Ethernet Controller". 5. Answer the questions as your need. 6. Finish the installation. *** Manual Add Driver *** You can modify protocol.ini to add jmnd.dos. [JM$JMND] DriverName=JMND$ *** Manual Configuration *** Find a sample protocol.ini and system.ini Sample system.ini: [network] sizworkbuf=1498 filesharing=no printsharing=no autologon=yes computername=JJ lanroot=C:\NET username=JJ workgroup=WORKGROUP reconnect=yes dospophotkey=N lmlogon=0 logondomain=WORKGROUP preferredredir=full autostart=full maxconnections=8 [network drivers] netcard=JMND.dos

transport=ndishlp.sys,*netbeui,tcpdrv.dos,nemm.dos devdir=C:\NET LoadRMDrivers=yes [386enh] TimerCriticalSection=5000 UniqueDosPSP=TRUE PSPIncrement=2 [Password Lists] *Shares=C:\NET\Shares.PWL

Sample protocol.ini: [network.setup] version=0x3110 netcard=JM$JMND,1,JM$JMND,1 transport=ms$nwlink,MS$NWLINK transport=ms$ndishlp,MS$NDISHLP transport=ms$netbeui,MS$NETBEUI transport=tcpip,TCPIP lana0=JM$JMND,1,ms$nwlink lana1=JM$JMND,1,ms$ndishlp lana2=JM$JMND,1,ms$netbeui lana3=JM$JMND,1,tcpip [TCPIP] NBSessions=6 SubNetMask0=255 0 0 0 IPAddress0=0 0 0 0 DisableDHCP=0 DriverName=TCPIP$ BINDINGS=JM$JMND LANABASE=2 [MS$NWLINK] FRAME=ETHERNET_802.2 DriverName=nwlink$ BINDINGS=JM$JMND [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [JM$JMND] DriverName=JMND$ [MS$NDISHLP] DriverName=ndishlp$ BINDINGS=JM$JMND [MS$NETBEUI] DriverName=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=JM$JMND LANABASE=1

You might also like