Professional Documents
Culture Documents
page
C1
FBC10
Frameless Balustrade Channel
Technical Considerations
It is recommended that a level rm surface to be provided for xing of the channel Do not x channel to compressible deck surfaces It is recommended that a suitably qualied engineer is consulted to check on all installations. Fixing to structure should be a minimum of M10 x 100 stainless steel xing. Please consult an engineer to determine what xings are required based on type of structure the channel will be attached to.
Important
Due to the lime content of all cementatious non shrink grout, please note the following: 1. The FBC10 balustrade channel should not be used in either anodized or mill nish. 2. Powder coating of channel must include both the inside and outside of the product. 3. Grout must be carefully mixed in accordance with the manufacturers instructions as given on the bag. Wrongly mixed grout will increase the likelihood of corrosion of the channel.
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C2
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
Balustrades
Note 1:
Panels must be greater than 1000mm wide.
Note 2:
The system cannot be used in applications where the area can be dened as one where people can congregate.
Note 1:
The system is not recommended for use in any balustrade installations where fall on the other side is greater than 1 metre.
Balustrades
Note 2:
The above results have been generated by ARUP Facade Engineering. Physical testing has also been conducted by Compusoft Engineering in New Zealand. The results of both these are being collated in conjunction with the proposed changes listed in the latest draft of revisions for AS1288.
FBC10 GROUT
Non Shrink Grout
Typical Details
Compressive strength: 49 MPa @ 1 day 62 MPa @ 7 days 79 MPa @ 28 days Flexural strength: 2.5 MPa @ 1 day 9.0 MPa @ 7 days 10.0 MPa @ 28 days Time for expansion: Start: 5 minutes Finish: 2 hours Fresh wet density approximately 2160 kg/ cu.m depending on the consistency used Youngs Modulus: 25 GPa Expansions characteristics: An expansion of up to 1% overcomes shrinkage in plastic material Setting times: Initial: 165 minutes 20 Final: 270 minutes 20
IMPORTANT: Grout must be mixed strictly in accordance with the manufacturers instructions on the bag. Incorrectly mixed grout can cause excessive corrosion.
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C3
FBC20 (Driglaze)
Driglaze Balustrade Channel
Driglaze is the revolutionary new method for supporting 10, 12 and 15mm toughened glass for balustrades. Driglaze eliminates the need for any grouting and therefore installation of balustrading is faster and cleaner than ever before. Driglaze offers the benet of adjustment up to 15mm vertically and angle adjustment of +/- 3. Installation is also made easy by use of the coverplate simply being clipped on from the interior side. This will eliminate the requirement for scaffolding on certain sites and provide increased ease of installation. Channel is predrilled at 400mm centres for ease of installation. This product not only boasts engineering function but also has clean lines to suit any style. Available in Silver Pearl marine grade powdercoated or mill nish, the product will suit all environments.
Product Specications
Standard for 10, 12 and 15mm glass with vertical adjustment up to 15mm Angle adjustment of +/- 3 (+/- 50mm @ 1000mm high) (+/- 60mm @ 1200mm high) Base channel predrilled 14mm diameter holes at 400mm centres
10, 12 or 15 mm glass.
-3o
+3o
Available Finishes
Base and coverplate available in silver pearl or mill nish Powder coat is Anotec Silver Pearl with 10 year warranty
Marine grade, Silver Pearl powdercoated, with a 10 year warranty for coastal/harsh environments, or Special powdercoat nishes available to match clients requirements.
Angle of adjustment up to +/- 3 to ensure all glass is vertical on sloping surfaces. +/- 50mm @ 1000mm high +/- 60mm @ 1200mm high Up to 15mm vertical adjustment to attain a level height. Built in weather strip for clean aesthetic lines. Heavy duty clip on coverplate from the interior side for increased ease of installation.
Rotating support for load carrying in various positions. Stainless Clamp Bolt.
Anodised clamping plate for maximum protection. Wide anchoring base for maximum load holding. Base and coverplate available in Silver Pearl, Mill nish or powdercoated to your choice of colour.
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C4
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
FBC20 Installation
Assembly Instructions
1 Cut the channel to size and place in position as required. Drill concrete slab at specied centres and install threaded studs using Chemset in accordance with the manufacturers instructions. M12 threaded stud to be drilled minimum 90mm into concrete when using Chemset (follow manufacturers instructions). This is a recommendation only. Please consult an engineer to determine most suitable xing method. Insert Pivot Nuts into the channel prior to securing the channel to the slab. Secure the channel to the concrete slab using M12 nuts and washers to a maximum height of 24mm above the substrate level. This is a recommendation only. Please consult an engineer to determine most suitable xing method. Insert the weatherstrip into the base channel. Place setting blocks in the base channel to support the glass while the clamps are placed on the glass. Fix the clamping assembly and adjusting screws around the glass and tighten to support the glass before nal adjustments are made. 8 Ensure that the two sections of the clamping assembly are assembled as per the diagram; the external section will hold the cover plate in place. Place the glass with the clamping assemblies attached in place into the base section and line up the pivot nuts to go through the xing kits. Tighten the nuts loosely onto the pivot nuts to hold the glass in place. Adjust the vertical height of the glass panels by moving the glass up and down as required with packers under the glass. Tighten the clamp nut at both ends of the glass panel, just enough to hold glass in place. Tighten the remaining clamps, checking for correct vertical and horizontal alignment and tighten all nuts. Adjust the adjusting screws evenly around the glass panel and between ends of the glass panel, just enough to hold glass in place. Fit the coverplate and end caps as required, placing the weatherstrip on the coverplate rst.
10
3 4
11 12 13
5 6 7
14
Clamp Nut
100mm
90mm
INTERNAL SIDE COVERPLATE SIDE
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C5
Residential Balustrade (External) and General Ofce (non retail) No. Of Clamps Per Panel
2 2 3 3 3 3 4 4 4 5 5 5 5 6 6 6
Public Areas - Retail without crowd loading No. Of Clamps Per Panel
2 2 3 3 3 3 4 4 4 5 5 5 5 6 6 6
Design Criteria
Residential Balustrade (Internal) and Pool Fencing
Minimum Glass Thickness: 12mm Toughened or 13.52 Toughened Laminate (up to 1200mm high) Maximum Load Capacity: up to 0.75kn/m, or 0.6kn point load Maximum Windload: up to 1.5kPa
45
Height Required minus 25mm from nished oor level H2 55mm W1 Please refer to table on C5, this will depend on glass widths and area type of installation W2 12mm Glass=25mm 15mm Glass=30mm H1
45 13 min/28 max depending on size of setting block 13 min/28 max depending on size of setting block
12 Channel 50 max
Note: Not to scale
12 Channel 50 max
Note: Not to scale
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C6
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 04/11
FMP BM SQ FF
Universal Mini Posts Base Mounted, Square Mini Post Friction Fit
Technical Details
No holes in glass required 316 Grade Stainless Steel Suitable for 12mm glass and 15mm glass Supplied with dress ring to conceal structural ttings For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
4 11
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the page C7C or referring to a suitably qualied engineer for use in balustrades. 2 Fix mini post to structure in desired location using suitable xing method. 3 Install glass into mini post, place cover plate on and secure by tightening 2 x M10 grub screws onto at clamping plate. 4. Final adjustment as required and then re check all screws are tight.
50 50
12
25
75
120
168 175
Note: For concrete decks we suggest HILTI HVU+HIS-RN M10 or equivalent anchors. As construction of timber decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application. Installers should check with anchor manufactures for minimum distance from the slab edge.
R5
.2
24.5
14
.5 10
5
61.39 14
0.5 1
R5 .2 5
61.39
Copyright 2011 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C7
UPDATE 04/11
FMP BM SQ HG
Universal Mini Posts Base Mounted, Square Mini Post Mechanical Fix
Technical Details
316 Grade Stainless Steel Suitable for 12mm glass and 15mm glass Supplied with dress ring to conceal structural ttings For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the page C7C or referring to a suitably qualied engineer for use in balustrades. 2 Fix mini post to structure in desired location using suitable xing method. 3 Install glass into mini post, place cover plate on and insert and tighten the M10 CSK bolt through the mini post. 4. Final adjustment as required and then re check all screws are tight. Note: For concrete decks we suggest HILTI HVU+HIS-RN M10 or equivalent anchors. As construction of timber decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application. Installers should check with anchor manufactures for minimum distance from the slab edge.
24.5 87.5 20
4 11
50
50
A
55
12
A
14
.5 10
61.39 14
65
0 0.5 1
R5 .25
20
5.2 5
61.39
Copyright 2011 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C7A
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 04/11
FMP BM RD FF
Universal Mini Posts Base Mounted, Round Mini Post Friction Fit
Technical Details
No holes in glass required 316 Grade Stainless Steel Suitable for 12mm glass Supplied with dress ring to conceal structural ttings For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
4 11
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the page C7C or referring to a suitably qualied engineer for use in balustrades. 2 Fix mini post to structure in desired location using suitable xing method. 3 Install glass into mini post, place cover plate on and secure by tightening 2 x M10 grub screws onto at clamping plate. 4. Final adjustment as required and then re check all screws are tight.
46.87 50
12
25
75 120 168
175
Note: For concrete decks we suggest HILTI HVU+HIS-RN M10 or equivalent anchors. As construction of timber decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application. Installers should check with anchor manufactures for minimum distance from the slab edge.
24.5
A
14
.5 10
61.39
0.5 1
61.39
R5 .25
5.2 5
14
Copyright 2011 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C7B
UPDATE 04/11
FMP BM RD HG
Universal Mini Posts Base Mounted, Round Mini Post Mechanical Fix
Technical Details
316 Grade Stainless Steel Suitable for 12mm glass and 15mm glass Supplied with dress ring to conceal structural ttings For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the page C7C or referring to a suitably qualied engineer for use in balustrades. 2 Fix mini post to structure in desired location using suitable xing method. 3 Install glass into mini post, place cover plate on and insert and tighten the M10 CSK bolt through the mini post. 4. Final adjustment as required and then re check all screws are tight. Note: For concrete decks we suggest HILTI HVU+HIS-RN M10 or equivalent anchors. As construction of timber decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application. Installers should check with anchor manufactures for minimum distance from the slab edge.
4 11
50 12
55
120
175 87.5
168
24.5
0.5 1
R5 .2 5
61.39
0 1 .5
20
65
5. 25
.
61.39
Copyright 2011 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C7C
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 04/11
Pool fencing (Concrete Applications Only) The following tables can be used to determine maximum panel size for each wind pressure. Please note this usage table is based on using HILTI HVU+HIS-RN M10 to a depth of 110mm.
Wind pressure kPa
Posts Per Panel Post Type
(See legend below)
0.8 kPa
mm mm
1.0 kPa
mm mm
1.5 kPa
mm mm
2.0 kPa
mm mm
2.5 kPa
mm mm
Max (A) Max (B) Max (A) Max (B) Max (A) Max (B) Max (A) Max (B) Max (A) Max (B)
ULS Wind Pressure 0.8 kPa (Region A2, TC 3) 1.0 kPa (Region A2, TC 2) 1.5 kPa (Region B, TC 3) 2.0 kPa (Region B, TC 2) 2.5 kPa (Region C)
Regions NSW, ACT, VIC, SA, WA (Sth of Green Head), Interior QLD & NT - Suburban NSW, ACT, VIC, SA, WA (Sth of Green Head) - Coastal & Open Terrain; Interior QLD & NT - Open Terrain QLD South of Bundaberg - Suburban QLD South of Bundaberg - Coastal / Exposed QLD (North of Bundaberg), NT Coastal
All Mini Posts are SS316 Tabulated values are based on design stresses limited by either the glass or mini-posts and/or deection. Values also based on M10 anchor base xing into non-crack concrete. Legend Post Post Post Post Type Type Type Type 1: 2: 3: 4: FMP FMP FMP FMP BM BM BM BM SQ FF - Base Mount, Square, Friction Fit SQ HG - Base Mount, Square, Mechanical Fix RD FF - Base Mount, Round, Friction Fit ** RD HG - Base Mount, Round, Mechanical Fix
**Note: Post Type 3: Round - Friction Fit - Mini Post is temporarily excluded from 12mm glass with 3 posts and all 15mm glass combinations pending test data analysis. Note: These calculations are based on using Fethers ttings and do not apply to ttings supplied by others.
1150
Copyright 2011 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C8
page
C8A
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 11/10
FMP CD SQ FF
Universal Mini Posts Core Drilled, Square Mini Post Friction Fit
Technical Details
No holes in glass required 316 Grade Stainless Steel Suitable for 12mm glass Supplied with dress ring to conceal core drilling and M16 threaded rod for height adjustment For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
00
50
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the following page or referring to a suitably qualied engineer for use in balustrades. 2 Core drill holes and x mini post into position using suitable xing method. 3 Place dress ring over post and into position at base of post. 4 Insert glass and tighten via M8 Grub screws 5. Ensure all panels are plumb and securely braced.
Note: As constructions of timber and concrete decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application.
50
12
25
75
120
240 50
350
70
150
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C8B
UPDATE 11/10
FMP CD SQ HG
Universal Mini Posts Core Drilled, Square Mini Post Mechanical Fix
Technical Details
316 Grade Stainless Steel Suitable for 12mm and 15mm glass Supplied with dress ring to conceal core drilling and M16 threaded rod for height adjustment For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the following page or referring to a suitably qualied engineer for use in balustrades. 2 Core drill holes and x mini post into position using suitable xing method. 3 Place dress ring over post and into position at base of post. 4 Insert glass and tighten into position via M10 CSK Bolt 5. Ensure all panels are plumb and securely braced.
Note: As constructions of timber and concrete decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application.
50
12
(55)
120 160 65
20 50
17.5 350 70
20
150
65
A
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C8c
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 11/10
FMP CD RD FF
Universal Mini Posts Core Drilled, Round Mini Post Friction Fit
Technical Details
No holes in glass required 316 Grade Stainless Steel Suitable for 12mm glass Supplied with dress ring to conceal core drilling and M16 threaded rod for height adjustment For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
100
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the following page or referring to a suitably qualied engineer for use in balustrades. 2 Core drill holes and x mini post into position using suitable xing method. 3 Place dress ring over post and into position at base of post. 4 Insert glass and tighten via M8 Grub screws 5. Ensure all panels are plumb and securely braced.
Note: As constructions of timber and concrete decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application.
46.87
12.5
25
75
120
240 50
360 70
50 160
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C8D
UPDATE 11/10
FMP CD RD HG
Universal Mini Posts Core Drilled, Round Mini Post Mechanical Fix
Technical Details
316 Grade Stainless Steel Suitable for 12mm and 15mm glass Supplied with dress ring to conceal core drilling and M16 threaded rod for height adjustment For details on custom designs and sizes please contact sales support on (03) 8562 0888
Available Finishes
Polished stainless steel Satin stainless steel
Installation Instructions
1 Determine appropriate glass sizes by referencing the Pool Fence Guide on the following page or referring to a suitably qualied engineer for use in balustrades. 2 Core drill holes and x mini post into position using suitable xing method. 3 Place dress ring over post and into position at base of post. 4 Insert glass and tighten into position via M10 CSK Bolt 5. Ensure all panels are plumb and securely braced.
Note: As constructions of timber and concrete decks vary innitely, we recommend consultation by a suitably qualied engineer to certify appropriate use in each application.
70 12.5
55
360
20
50 160
65
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C8E
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 11/10
Pool fencing
The following tables can be used to determine maximum panel size for each wind pressure:
Wind pressure kPa 0.8 kPa 1.0 kPa
Post Type
1.5 kPa
2.0 kPa
2.5 kPa
Max (B) Max (A) Max (B) Max (A) Max (B) Max (A) Max (B) Max (A) Max (B) mm mm mm mm mm mm mm mm mm
mm
1, 2, 4
800
2000
600
1600
300
1000
200
800
N/A
N/A
ULS Wind Pressure 0.8 kPa (Region A2, TC 3) 1.0 kPa (Region A2, TC 2) 1.5 kPa (Region B, TC 3) 2.0 kPa (Region B, TC 2) 2.5 kPa (Region C)
Regions NSW, ACT, VIC, SA, WA (South of Green Head), Interior QLD & NT - Suburban NSW, ACT, VIC, SA, WA (South of Green Head) - Coastal & Open Terrain; Interior QLD & NT - Open Terrain QLD South of Bundaberg - Suburban QLD South of Bundaberg - Coastal / Exposed QLD (North of Bundaberg), NT Coastal
All Mini Posts are SS316 Tabulated values are based on design stresses limited by either the glass or mini-posts and/or deection. Legend Post Post Post Post Type Type Type Type 1: 2: 3: 4: FMP FMP FMP FMP CD CD CD CD SQ FF - Core Drill, Square, Friction Fit SQ HQ - Core Drill, Square, Mechanical Fix RD FF - Core Drill, Round, Friction Fit ** RD HG - Core Drill, Round, Mechanical Fix
**Note: Post Type 3: Round - Friction Fit - Mini Post is temporarily excluded from 12mm glass with 3 posts and all 15mm glass combinations pending test data analysis. Note: These calculations are based on using Fethers ttings and do not apply to ttings supplied by others.
1150
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C9
FBF2000
FBF2500
Available Finishes
Satin stainless steel Polished stainless steel
FBF2100
24
13
18/20
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C10
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
Residential Applications
Allowable glass spans in mm
No. ttings
4 4 6 6 8 8
Glass thickness
8mm 10mm 8mm 10mm 8mm 10mm
Commercial Applications
Allowable glass spans in mm
No. ttings
4 4 6 6 8 8
Glass thickness
8mm 10mm 8mm 10mm 8mm 10mm
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C11
FBF4000
Balustrade Clamp Mechanical Fixing Through Glass
Technical Details
Used in balustrades and pool fencing where mechanical xing through glass is required. Suitable for 8mm, 10mm glass Can be adopted to suit 6mm glass. Please specify at time of order Provides concealed xing to posts and substrates Requires 18mm hole in glass
Note: Fixings are not supplied with the clamp
Available Finishes
Satin stainless steel Polished stainless steel
35
25
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C12
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
Glass Anchor
Standard Button Head
Technical Details
Supplied as standard in 316 grade satin stainless steel Suitable for 6mm, 8mm, 10mm and 12mm glass Custom sizes and styles available on request Other nishes available include polished stainless steel, 24k gold or powdercoat
Code
GA19/10 SSS GA19/20 SSS GA19/30 SSS GA25/20 SSS GA25/30 SSS GA25/50 SSS GA32/20 SSS GA32/30 SSS GA32/50 SSS
Diameter
19mm 19mm 19mm 25mm 25mm 25mm 32mm 32mm 32mm
Body length
10mm 20mm 30mm 20mm 30mm 50mm 20mm 30mm 50mm
Thread
M6 M6 M6 M6 M6 M6 M10 M10 M10
Hole in glass
10mm 10mm 10mm 10mm 10mm 10mm 14mm 14mm 14mm
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C13
Glass Anchor
Counter Sunk Head
Technical Details
Supplied as standard in 316 grade satin stainless steel Suitable for 6mm, 8mm, 10mm and 12mm glass Custom sizes and styles available on request Other nishes available include polished stainless steel, 24k gold or powdercoat
Code
GA19/10 CSK-SSS GA19/20 CSK-SSS GA19/30 CSK-SSS GA25/20 CSK-SSS GA25/30 CSK-SSS GA25/50 CSK-SSS GA32/20 CSK-SSS GA32/30 CSK-SSS GA32/50 CSK-SSS
Diameter
19mm 19mm 19mm 25mm 25mm 25mm 32mm 32mm 32mm
Body length
10mm 20mm 30mm 20mm 30mm 50mm 20mm 30mm 50mm
Thread
M6 M6 M6 M6 M6 M6 M10 M10 M10
Dimension A
18mm 18mm 18mm 18mm 18mm 18mm 24mm 24mm 24mm
Dimension B
10mm 10mm 10mm 10mm 10mm 10mm 16mm 16mm 16mm
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C14
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
Glass Anchor
Counter Sunk Head With Cap
Technical Details
Supplied as standard in 316 grade satin stainless steel Suitable for 6mm, 8mm, 10mm and 12mm glass Custom sizes and styles available on request Other nishes available include polished stainless steel, 24k gold or powdercoat
Code
GA19/10 CAP-SSS GA19/20 CAP-SSS GA19/30 CAP-SSS GA25/20 CAP-SSS GA25/30 CAP-SSS GA25/50 CAP-SSS GA32/20 CAP-SSS GA32/30 CAP-SSS GA32/50 CAP-SSS
Diameter
19mm 19mm 19mm 25mm 25mm 25mm 32mm 32mm 32mm
Body length
10mm 20mm 30mm 20mm 30mm 50mm 20mm 30mm 50mm
Thread
M6 M6 M6 M6 M6 M6 M10 M10 M10
Dimension A
22mm 22mm 22mm 22mm 22mm 22mm 30mm 30mm 30mm
Dimension B
10mm 10mm 10mm 10mm 10mm 10mm 18mm 18mm 18mm
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C15
UPDATE 02/11
BF1000
Glass Anchor
How the Product Code works
BF1000-50/10
Product Diameter Spacer
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Spacer options 10, 15, 20, 30 and 50mm Suitable for 10, 12, 15, and 19mm glass M12 Threaded rod as standard Can supply lag screws, timber inserts or masonry xings if required
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
C15 A
UPDATED 08/10
page
75-77 Rickett Rd, Mt Waverley, VIC 3170 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
BFA1000 Adjustable
Adjustable Glass Anchor
How the Product Code works
BFA1000-50/20
Product Diameter Spacer
Technical Details
316 grade satin stainless steel nish Spacer options; - 50mm diameter: 20-25mm and 40-45mm - 35mm diameter: 30-35mm and 45-50mm Suitable for 10mm, 12mm and 15mm glass Glass hole required; - 35mm diameter: 28mm - 50mm diameter: 34mm Easy adjustment from centre, after installation of glass Single gasket suitable for various glass thicknesses.
BFA1000 50/20
Available Finishes
Polished Stainless Steel Satin Stainless Steel
30
BFA1000-35/30
BFA1000-35/45
30-35
45-50
BFA1000-50/20
BFA1000-50/40
36
50
50
20-25
40-45
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Rickett Rd, Mt Waverley, VIC 3170 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
C15 B
page
page
C16
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 02/11
BF1100
Glass Anchor
How the Product Code works
BF1100-50/10
Product Diameter Spacer
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Spacer options 10, 15, 20, 30 and 50mm Suitable for 10, 12, 15, and 19mm glass M12 Threaded rod as standard Can supply lag screws, timber inserts or masonry xings if required
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C17
UPDATE 02/11
BF1150
Glass Anchor
How the Product Code works
BF1150-50/10
Product Diameter Spacer
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Spacer options 10, 15, 20, 30 and 50mm Suitable for 10, 12, 15, and 19mm glass Glass hole required is 24mm diameter M12 Threaded rod as standard Can supply lag screws, timber inserts or masonry xings if required
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C18
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 02/11
BF1200
Handrail Fixing BF1200-38
For 38mm diameter
BF1200-50
For 50mm diameter
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Suitable for mounting handrails to the glass panel Suitable for 10, 12, 15, and 19mm glass Saddles (at & curved) can be supplied loose or welded on to upright if required. Please specify if required.
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C19
UPDATE 02/11
BF1300
Handrail Fixing BF1300-38
For 38mm diameter
BF1300-50
For 50mm diameter
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Suitable for mounting handrails to the glass panel Suitable for 10, 12, 15, and 19mm glass Saddles (at & curved) can be supplied loose or welded on to upright if required. Please specify if required.
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C20
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 02/11
BF1400
Post Attachment BF1400-38
For 38mm diameter
BF1400-50
For 50mm diameter
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Designed to be welded to a vertical post to attach the glass panels Suitable for 10, 12, 15, and 19mm glass Can also be used to mount handrails to glass. Saddles (at & curved) can be supplied loose or welded on to upright if required. Please specify if required.
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C21
UPDATE 02/11
BF1500
Post Attachment BF1500-38
For 38mm diameter
BF1500-50
For 50mm diameter
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Designed to be welded to a vertical post to attach the glass panels Suitable for 10, 12, 15, and 19mm glass Can also be used to mount handrails to glass. Saddles (at & curved) can be supplied loose or welded on to upright if required. Please specify if required.
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C22
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
UPDATE 02/11
BF1600
Post Attachment
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Long xing leg can be cut to size to suit any application including staircases
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C23
UPDATE 02/11
BF1700
Post Attachment
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Spacer options 10 and 15mm Long xing leg can be cut to size to suit any application including staircases
Copyright 2010 This document & its contents including images, drawings & specication are the exclusive property of
Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C24
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
BF300
BF310
Available Finishes
Satin stainless steel Polished stainless steel
BF500
BF500SP
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C25
BF600
38mm or 50mm Diameter Spacer.
How the Product Code works
BF600-50/10
Product Diameter Spacer
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order Spacer options 10, 15, 20, 30 and 50mm Suitable for 10, 12, 15, and 19mm glass
BF610
Tapered Nut
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Available Sizes:
38mm Spacer BF610-38 50mm Spacer BF610-50
38/50
38/50
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C26
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
BF620
Flange Tapered Range
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Available Sizes:
38mm Spacer BF620-38 50mm Spacer BF620-50
38/50
38/50
BF630
50mm Diameter Covered Flange Plate
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
50
50
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C27
BF640
50mm Diameter Nut
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Available Sizes:
38mm Spacer BF640-38 50mm Spacer BF640-50
38/50
38/50
BF650
50mm Diameter Covered Range
Technical Details
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Available Sizes:
38mm Spacer BF650-38 50mm Spacer BF650-50
38/50
38/50
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C28
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
BF660
Long Plate With M12 Threaded Rod Used For BF1600 & BF1700
Available Finishes
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
BF670
Short Plate With M12 Threaded Rod Used For BF1600 & BF1700
Available Finishes
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
BF700
75mm Offset M12 Wall Bracket
Available nish
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C29
BF710
80mm Offset M12 Wall Bracket
Available nish
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
BF720
Offset M12 Offset Post Bracket
Available nish
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
BF730
Masonry Wall Bracket
Available nish
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
page
C30
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
BF740
150mm Straight Rod M12 Thread
Available nish
316 grade satin stainless steel nish (ex stock) other nishes can be made to order
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.
75-77 Ricketts Rd, Mt Waverley, VIC 3149 Tel: (03) 8562 0888 Fax: (03) 8562 0899 Toll Free: 1800 099 918 Email: sales@fethers.com www.fethers.com
page
C31
BF810
Clear Protective Sleeve
Please Note: BF810-20 to suit BF650 head
GA Grips
Multi Grips With Plastic Jaws
Copyright 2010 This document & its contents including images, drawings & specication are the
exclusive property of Fethers Glazing Systems Pty Ltd, & must not be copied or used directly or indirectly in any way. Unauthorised use may result in legal action.