Professional Documents
Culture Documents
d. If you have a problem stabilizing your restraint in the rear facing position, place a rolled towel in the crease of the seat to help level the base of the restraint. WARNING: D O N O T raise the base beyond horizontal or off of the vehicle seat; doing so will reduce the protection for your child.
LATCH Supplement
Rear Facing Installation with LATC H
1 Verify that your vehicle is equipped with LATCH anchors. (Fig B)
If LATCH anchors are not installed, you must use standard seat belt installation methods.
LATC H Anchors
2 Place the restraint rear facing and fully reclined on the vehicle seat. 3 Loosely attach each LATCH connector to the adjacent LATC H anchor. (Fig. C )
A positive click confirms attachment to the LATCH anchor. If necessary, press silver adjuster release button, then pull to lengthen LATCH webbing. (Fig. E)
4 With one hand, push the restraint firmly into the vehicle seat while pulling the first LATCH connector strap tight. (Fig. D ) 5 Continue pressing restraint firmly into the vehicle seat while pulling the second LATCH connector strap tight. 6 If desired, attach Versa-Tether as instructed in the User Guide. 7 Verify that all connections are tight and the restraint is secure.
LATCH Supplement
Forward Facing Installation with LATC H
1 Verify that your vehicle is equipped with LATCH anchors. (Fig B)
If LATCH anchors are not installed, you must use standard seat belt installation methods.
LATC H Webbing Adjuster Release Button LATC H Connector
2 Place the restraint forward facing on the vehicle seat. 3 Loosely attach each LATCH connector to the adjacent LATC H anchor. (Fig. F)
A positive click confirms attachment to the LATCH anchor. If necessary, press silver adjuster release button, then pull to loosen LATCH webbing. (Fig. E)
4 With one hand, push the restraint firmly into the vehicle seat while pulling the first LATCH connector strap tight. (Fig. G ) 5 Continue pressing restraint firmly into the vehicle seat while pulling the second LATCH connector strap tight. 6 If desired, attach Versa-Tether as instructed in the User Guide. 7 Verify that all connections are tight and the restraint is secure.
LATCH Supplement
Removal
To remove the restraint, release both LATCH connectors from If connected, disconnect the Versa-Tether from the tether Always store LATCH connectors in storage slots under cover.