Professional Documents
Culture Documents
NEOPLAST Group Pipe and Plastic Industry Trade Limited Company began operations in order to manufacture pipes and pipe systems previously used the experiences in facilities which is built on 50,000 square meters of land in 2011. Head office is in Ankara and the production site is in Krehir Organized Industrial Zone. Neoplast Products are as follows: Spiral HDPE Corrugated Pipe up to 2600mm Diameter Steel Reinforced Spiral HDPE Corrugated Pipe up to 2600mm Diameter GRP (Glass Reinforced Polyester) Pipe up to 2000mm Diameter Polyurethane Filled Geothermal Pipe
CorrugatedPipes
Neoplast Corrugated Pipe .........................................................................................2 Range of Products ...............................................................................................3 Advantage of Our Pipes .......................................................................................5 Installation of Pipe.................................................................................................8 Difference of Other Pipes......................................................................................9 Neoplast Glass Reinforced Polyester Pipe (GRP) .....................................................15 Feature of GRP Pipe ............................................................................................17 Diameters of GRP Pipe ........................................................................................19 Fittings and Special Parts .....................................................................................21 Neoplast GRP Polyurethane Filled Geothermal Pipe.................................................23
Corrugated
Secret Power
Areas of Usage...
Water Transmission Line of Hydroelectric Power Plant Projects Infrastructure Projects Irrigation Systems Sewage Lines and Domestic Coupling Rain Water Lines Industrial Projects Drainage Systems Treatment Facilities
CorrugatedPipes
Range of Products...
HDPE (High Density Polyethylene) Corrugated Pipes are produced in range of 200mm-2600mm outside diameter. HDPE Corrugated Pipes can be produced both Steel Reinforced Spiral and Spiral Corrugated. Inner surface of pipes are smooth, outer surface is ribbing and resistant to external load.
Usage is water and wastewater conveyance usually in 80 percent impletion with the gravity. As a result of the project accounts, which should be a real stiffness properties are produced. Due to continuous spiral technology, pipes can be produced the desired size.
Nominal Dia DN 200 300 400 500 600 700 800 600 800 1000 1200 1400 1500 1600 1800 2000 2200 2400
Inner Dia (mm) ID 200 300 400 500 600 700 800 600 800 1000 1200 1400 1500 1600 1800 2000 2200 2400 SN 4 + + + + + + + + + + + + + + + + + +
Because of special design of outer surface, our pipes are resistant to heavy traffic loads, stroke, any loads and ground motions. All the loads on the pipe is distributed homogeneously.
Because groundwater is liquefying earth under the pipe, there emerge big buoyancy as a consequence stress and buckling. Our pipes are known the most resistant pipes to these forces.
Installation and coupling processes are easy. The pipes are connected with electrofusion bands or shrink sleeve coupling. Also, with hand extrusion machine the gap of inner joints of the pipes are filled. Special products and joints can be produced.
CorrugatedPipes
CorrugatedPipes
Quality Concept...
There is 3 quality control level inside the Neoplast laboratory and production line.
Process Control
Mandatory testing suitable raw materials and supplementary materials for production during the manfacturing process. Our priority is increasing the quality standarts by testing the products with experienced engineers and technicans during the production. Produced each pipe must be controlled and tested from our personnel. Meanwhile, the tests are specified from TSE(Turkish Institute of Standards) and ISO are as follows: Ring Stiffness Test, MFI Test, Impact Resistance Test, Density Test, Rupture and Elongation Test, Heat Resistance Test, Impermeability Test, In Length Elongation Test It is intervened if the situation is non-compliance with these standards during the production. Defects are averted in less time with troubleshooting process depending on the standards.
DN
t (mm)
W (min)
CorrugatedPipes
Coupling Process...
Electrofusion Welding Method
It is applied by using made of polyethylene and covered with copper wire Electrofusion Band and Electrofusion Welding Machine. For each diameter, electrofusion band is changing and electrofusion welding machine adjustment is changing. Pipes are centering inside with the hoop and be ready for the Electrofusion Welding. Then, applying area is cleaned and EF Band is fixed between the two ribs. Setting of EF Welding Machine adjusts according to desired diameter value and waiting for cooldown. It is welded with hand extruder inside the welding area in order to impermeability. Thereby,it is acquired fully impermeability. Coupling welding can be processes inside the canal and outside of canal.
Our Practices...
10
CorrugatedPipes
Quality Certificates
-In our catalog, all photos' rights reserved Neoplast. -In the catalog, all values are information.
11