Professional Documents
Culture Documents
9/14
3 Dimensions
The external diameter and the wall thickness, the of this European norm specified tubes, were chosen by ISO 4200 (1). If a wall thickness bigger than 14,2 mm is required, you have to choose it also by ISO 4200.
4 Limiting sizes
The for the external diameter and the wall thickness of the tubes acceptable limiting sizes are dependent on the manufactured steel grade and heat treatment. The limiting sizes you have to chose of the denoted values on table 1 and 2.
Approval-note
The text of the international standardisation ISO 1127:1992 was allowed of CEN as European norm without any alteration.
11.2007_1.000
D1 D2 D3 D4
www.rofi.de
1,00 % mit min. 0,50 mm 0,75 % mit min. 0,30 mm 0,50 % mit min. 0,10 mm
1 Coverage
This European standardisation specified diameter, wall thickness, border dimension and values for the fibre coarseness of stainless steel tubes.
The limiting sizes for the external diameter contained the ovality.
2 Normative references
The following norms contains agreements which, as refer on it in the present text, demonstrate the agreements of this international norm. At the publication point the denoted edition was guilty. All norms liable to the revision and the partner of the agreements which based on the present international standardisation are required to apply the newest edition at of the bottom denoted norms. Members of the ICE and the ISO keep the indexes of the actual guilty international norms. ISO 5252: 1991 steel tubes tolerance system
The limiting sizes for the wall thickness contained the eccentricity
9/15
9/16
Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, mm
The values of the fibre coarseness in table 3 for austenitic non-rusting steel tubes results of the multiplication of the according values of ISO 4200 with the factor 1,015. This factor act on the assumption of the average density of this tubes from 7,97 kg/dm.
The values of the fibre coarseness in table 4 for ferritic, martensitic stainless steel tubes results of the multiplication of the according values of ISO 4200 mit the factor 0,985. This factor act on the assumption of the average tightness of this tubes from 7,73 kg/ dm.
11.2007_1.000
Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, mm
www.rofi.de
9/17
9/18
Table 3: Usual values of the fibre coarseness of austenitic non-musting steels thickness, mm
11.2007_1.000
Table 4: Usual values of the fibre coarseness of austenitic non-musting steels thickness, mm
www.rofi.de
9/19
9/20
thickness, mm
Tabelle 4. Fortsetzung: bliche Wertethe fibre coarseness of Masse austenitischer nichtrostender Sthle Table 4: Usual values of der lngenbezogenen austenitic non-musting steels
11.2007_1.000
Table 4: Usual values of the fibre coarseness of austenitic non-musting steels thickness, mm
Annex A (informative)
bibliography
www.rofi.de
(1) ISO 4200:1991 Plain and steel tubes, welded and seamless General tables of dimensions and masses per unit length.
9/21
S TA I N L E S S S T E E L
www.rofi.de
South
Karl-Arnold-Strae 7 D-73230 Kirchheim/Teck Tel. +49 (0) 70 21 94 35-0 Fax +49 (0) 70 21 5 60 31 kirchheim@rofi.de
North Export
Mittelgnrather Strae 15 D-42655 Solingen Tel. +49 (0) 2 12 2 32 54-0 Fax +49 (0) 2 12 2 32 54-11 solingen@rofi.de
Middle
Ostendstrae 3 D-63110 Rodgau-Niederroden Tel. +49 (0) 61 06 2 85 79-30 Fax +49 (0) 61 06 2 22 08 rodgau@rofi.de
East
Reuterstrae 2 D-99867 Gotha Tel. +49 (0) 36 21 7 33 97-0 Fax +49 (0) 36 21 7 33 97-10 gotha@rofi.de