TE PID temperature controller can be used for temperature measuring, displaying, alarm, adjust and control, with optional output module (Relay, SSR, SCR) to change different output just need to change output mode in the controller.
TE PID temperature controller can be used for temperature measuring, displaying, alarm, adjust and control, with optional output module (Relay, SSR, SCR) to change different output just need to change output mode in the controller.
TE PID temperature controller can be used for temperature measuring, displaying, alarm, adjust and control, with optional output module (Relay, SSR, SCR) to change different output just need to change output mode in the controller.
Display measuring value (-199 999) or display parameters. Display set value or parameter value. Alarm output lamp:ON:alarm active, OFF:no alarm output. Parameters select/confirm keyAt measuring estate, set key is used as modifying set value. " " decrease key, " " increase key "AT":press"AT"key for 3 seconds to start or stop PIDAuto-tune. Auto-tuning indicating lamp:ON:auto-tuning OFF:auto-tuning not active Output indicating lamp:ON:Output active OFF:Output not active Applications: TE PID temperature controller can be used for temperature measuring , displaying , alarm , adjust and control, with optional output module ( Relay, SSR, SCR), widely applied in the temperature control systems in all the industries. 2 Features 2.1 Input signals:Thermocouple T/C:K(0 999 ) E(0 999 ) 1(0 999 ) T(0 400 ) RTD:Pt100(-199 600 ) Cu100(-50 150 ),It can be selected by sofeware,(Cu50 input must be mentioned when order). 2.2 Control output: R: RELAY; S: SSR; K: SCR selected by software. To change different output just need to change output mode in the controller. 2.3 Auxiliary conrtol output:one relay high value alarm output.Capacity 250VAC/3Aor 30V DC/3A. 2.4 Sampling rate: 0.5S. 2.5 Accuracy: 0.5F.S. 2digit 2.6 Power:TE6 TE7 TE9:220V/110VAC 15,TE4:85 265VAC/DC,50 60HZ,Consumption<5VA. 3 Ordering Code TE - 10:1 loop input E,1,K,T,Pt100,Cu100 Alarm Output: B: 1 alarm Control output: R: RELAY output S: SSR output K: SCR output Default:Auto PID controller Power Supply:Default:110V/220VAC (TE4: 85-265V AC/DC) Size:4:48W 48H 6:48W 96H 7:72W 72H 9:96W 96H (mm) TE Temperature Controller Code Output Alarm YES YES YES Control Output TE -RB10 TE -SB10 TE -KB10 TE - Relay SSR control output SCR control output KK051A-1(A/5) IF above model can not be satisfied,the customers should provide specification for special model. 4 Panel Illustrations(Patent Panel) Code D A C Size F E G H Size Code TE4 TE6 TE7 TE9 A B C D E F G H 44+0.5 44+0.5 67.5+0.8 91+0.5 44+0.5 91+0.5 67.5+0.8 91+0.5 30 25 30 25 25 30 14 30 48 48 72 96 48 96 72 96 5 12 12 12 100 100 100 100 Y A L E R 19 18 17 16 15 14 13 7 6 5 4 3 2 18 17 + - SSR 19 17 T G SCR 7 6 + TC TE7( Please indicate the power supply is AC 110V or AC220V when order) 1 AL 220V/110V( 10) NC NO 4 3 7 6 2 1 9 8 7 6 85 265VAC/DC G T TE4 Rt 5 TC/mV NC NO Y A L E R AL1 4 3 5 3 SSR Rt A B B A B B 10 10 11 12 13 14 15 16 1 2 3 4 5 6 14 15 + - TC TE9 7 AL 8 9 17 18 19 110V 220V ( 10) Y A L E R NO NC 7 8 + - SSR 7 9 T G SCR 20 19 18 17 16 15 14 13 16 15 12 11 10 9 8 7 6 5 4 3 2 110V 4 3 + - R S S 4 2 T G R C S AL + - TC TE6 1 220V ( 10) Y A L E R NO NC Rt A B B Rt A B B If any changes,please subject to the connection diagram on the product. ATTENTION:OVERCURRENT PROTECTION DEVICES,EXTERNAL FUSES(suggest 245V AC/100mA) OR CIRCUIT BREAKER (suggest 245V AC/100mA) ARE REQUIRED TO BE NEAR THE EQUIPMENT. 5 Key operation: 5.1 Press "SET" key for 3 seconds, enter the PID parameter adjust menu. 5.2 Press "SET" key to select the parameter you want to modify, then press "AT" key, LED flashes, press "AT" key again to shift the digit. Then press " or " key to increase or decrease the value. At last, press SET key to confirm the value. Press "SET" key again to move to the next parameter it also go back to the measuring estate. 5.3 The unit will go back to measuring estate without key operation for 25 seconds. Or press "SET" key for 3 seconds, it also go back to the measuring estate. KK051A-2(A/5) B Add.: Civil Science & Technology Park, No.8 Minke West Road,