Professional Documents
Culture Documents
A1 K A2
K
Negligible switching losses Low leakage current Good trade off between leakage current and forward voltage drop Low thermal resistance Avalanche capability specified STPS15H100CB DPAK STPS15H100CH IPAK
A1 A2
K A1
A2
Description
Dual center tab Schottky rectifier suited for switched mode power supply and high frequency DC to DC converters. Packaged in DPAK and IPAK, this device is intended for use in high frequency inverters. Table 1.
Symbol VRRM IF(RMS) IF(AV) IFSM IRRM PARM Tstg Tj dV/dt
1.
dPtot --------------dTj
Value 100 10 Tc = 135 C = 0.5 Per diode Per device 7.5 15 75 1 6600 -65 to + 175 175 10000
Unit V A A A A W C C V/s
1 < -------------------------- condition to avoid thermal runaway for a diode on its own heatsink Rth ( j a )
June 2006
Rev 4
1/8
www.st.com 8
Characteristics
STPS15H100C
Characteristics
Table 2.
Symbol Rth(j-c) Rth(c) Junction to case Total Coupling 2.4 0.7 C/W
Thermal resistance
Parameter Per diode Value 4 Unit
When the diodes 1 and 2 are used simultaneously : Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) Table 3.
Symbol IR(1)
VF(1.)
Tj = 25 C Tj = 125 C Tj = 25 C Tj = 125 C
To evaluate the conduction losses use the following equation: P = 0.58 x IF(AV) + 0.012 IF2(RMS)
2/8
STPS15H100C
Characteristics
Figure 1.
PF(av)(W)
7 6 5
8 7
Rth(j-a)=Rth(j-c)
= 0.2 = 0.1 =1
6 5 4 3
Rth(j-a)=70C/W
4 3 2
= 0.05
2 1
IF(av)(A)
0 0 1 2 3 4 5 6
=tp/T
7 8
tp
=tp/T
0 25
tp
Tamb(C)
50 75 100 125 150 175
Figure 3.
Figure 4.
PARM(tp) PARM(1s)
1
1.2 1
PARM(tp) PARM(25C)
0.1
0.8 0.6
0.01
0.4 0.2
0.001
0.01 0.1 1
tp(s)
10 100 1000
Tj(C)
0 0 25 50 75 100 125 150
Figure 5.
Non repetitive surge peak forward current versus overload duration (maximum values)
Figure 6.
IM(A)
100 90 80 70 60 50 40 30 20 10 0 1.E-03
IM t
Tc=125C Tc=25C
Zth(j-c)/Rth(j-c)
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2
=0.5
= 0.2 = 0.1 = 0.5
Tc=75C
T
Single pulse
t(s)
1.E-02 1.E-01 1.E+00
0.1
tp(s)
1.E-02 1.E-01
0.0 1.E-03
=tp/T
tp
1.E+00
3/8
Characteristics
STPS15H100C
Figure 7.
Figure 8.
IR(mA)
1.E+01
1.0
C(nF)
1.E+00
Tj=125C
1.E-01
Tj=100C
Tj=75C
0.1
1.E-02
Tj=50C
1.E-03
Tj=25C
VR(V)
1.E-04 0 10 20 30 40 50 60 70 80 90 100
0.0 1
VR(V)
10 100
Figure 9.
Figure 10. Thermal resistance junction to ambient versus copper surface under tab (epoxy printed board FR4, Cu: 35m)
Rth(j-a)(C/W)
100 90
IFM(A)
100
80 70
10
60 50 40 30 20
VFM(V)
1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
10 0 0 2 4 6 8
S(cm)
10 12 14 16 18 20
4/8
STPS15H100C
Package Information
Package Information
Epoxy meets UL94,V0 Table 4. DPAK Package mechanical data
Dimensions Ref Millimeters Min. A A1 A2 B B2 C C2 D E G H L2 L4 V2 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 Max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 Inches Min. 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 Max. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397
6.7
5/8
STPS15H100C
Inches Min. 0.086 0.035 0.027 0.025 0.204 Typ. Max. 0.094 0.043 0.051 0.035 0.212 0.037 0.035
Typ.
B B2 B3 B5
D
0.30 0.45 0.48 6 6.40 2.28 4.40 16.10 9 0.8 0.80 10 9.40 1.20 1 0.354 0.031 4.60 0.173 0.60 0.60 6.20 6.60 0.017 0.019 0.236 0.252
C C2
0.023 0.023 0.244 0.260 0.090 0.181 0.634 0.370 0.047 0.031 0.039 10
H L
L1
B3 B V1 A1
D E e
e G
B5
C A3
G H L L1 L2 V1
6/8
STPS15H100C
Ordering Information
Ordering Information
Ordering type STPS15H100CB STPS15H100CB-TR STPS15H100CH Marking S15H100 S15H100 S15H100CH Package DPAK DPAK IPAK Weight 0.30 g 0.30 g 0.35 g Base qty 75 2500 75 Delivery mode Tube Tape andreel Tube
Revision History
Date Mar-2004 08-Jun-2006 Revision 3 4 Last issue Reformatted to current standard. Added IPAK. Changes
7/8
STPS15H100C
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to STs terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8