Professional Documents
Culture Documents
www.huawei.com
References
Page2
Objectives
Page3
Contents
1. Preparing for the Data 2. Setting Up the OM Links 3. Configuring BTS Data
Page4
Contents
1. Preparing for the Data 2. Setting Up the OM Links 3. Configuring BTS Data
Page5
Page6
OM Link Data
Item
IP address of the local maintenance port ITFIP
Description
The IP address of the maintenance port on CMPT board. Default value: 192.168.0.100 The IP address of the physical port corresponding to the OM link. Physically, it is the IP address of the traffic port on the BMPT. A logical IP address and is deployed on the BMPT. It is used for the connection between the BTS and the M2000.
OM IP
M2000 IP
Route
Page7
Description
The IP address of the physical port corresponding to the R6 interface. Physically, it is the IP address of the traffic port on the BMPT. A logical IP address, which is deployed on the BMPT. It is for signaling exchange. The path between the ITFIP and the GWIP. The IP address of the ASN-GW, which communicates with the BTS. Its a logical R6 interface IP address in WASN9770 The route from the BTS to the GW. It is the ID of the ASN-GW, which communicates with the BTS. For example, 0505-0505-0505. used
Page8
Description
It is the ratio of the TDD frame of the downlink to that of the uplink
Page9
DLZONEIN D
ULZONEIN D
0 1 2
00000003
1 1 1
1 1 1
10M/7M PUSC1/3
1 2
0000000C
00000030
0000003F
10M/7M PUSCALL
0000003F
0000003F
00000015
0000000000 0001FFFF
0000000000 0001FFFF 0000000000 0001FFFF
5M PUSCALL
00000015
00000015
Page11
Optional Parameters
Serial Number
1 2 3 4 5 6 7 Paging group Neighboring cell SectorID CarrierID PreambleIndex DLPUSCPERMBASE DLPUSCALLPERMBASE
Item
Page12
Item
11
12 13 14
DLPUSCALLSTCPERMBASE
ULPUSCPERMBASE ULPUSCALLPERMBASE ULBANDPERMBASE
Page13
GWID
OperatorID 24bits CountryID 8bits CityID 6bits SiteID 4bits GW Num 6bits
Page14
Contents
1. Preparing for the Data 2. Setting Up the OM Links 3. Configuring BTS Data
Page15
Page16
Run the RMV ITFIP command to remove the configured ITFIP Run the ADD ITFIP command to add the ITFIP Run the LST ITFIP command to query the ITFIP
Page17
If the configured route is incorrect, run the RMV IPRT command to remove the configured route
Run the ADD IPRT command to add IPRT Run the LST IPRT command to query the IPRT
Page18
Run the ADD OMCH command to add an IP Run the LST OMCH command to query the OMCH
Run the PING command to check whether the OM links are successfully configured
Page19
Contents
1. Preparing for the Data 2. Setting Up the OM Links 3. Configuring BTS Data
Page20
Run the LST SUBRACK command to query the configurations of the BBU and RRU
RRU Subrack ID
2 3 4 5 6 7
RRU ID
0 1 2 3 4 5
Page21
Run the LST BRD command to query the configurations of the board in the BBU
Run the ADD BRD command to add the BMPT or BBBI if necessary
Page22
Run the LST RRU command to query the configurations of the RRU
Run the ADD RRU command to add RRU boards. Run the ADD SECTOR command to configure sectors
Run the ADD CARRIERBASICINFO command to configure carriers according to the data provided by the operator
Page23
If you want to set the time manually, run the SET TIME command to set the time If you want to use NTP server as time source, run the SET NTPC command to set the time
Page24
Run the LST TIMETHRD command to query the time synchronization threshold and the validity Run the SET TIMETHRD command to set the time synchronization threshold and the validity
Run the LST TZ command to query the time zone and daylight saving time
Run the SET TZ command to set the time zone and daylight saving time
Run the LST TZ command to query the time zone and DST
Page25
Configuring R6 Interface
Run the SET ETHPORT command to set the attribute of an Ethernet port
Run the ADD SIGCH command to add a signaling channel Run the ADD IPPATH command to add an IP channel Run the ADD IPRT command to add a route between the BTS and the ASN-GW
Page26
Run the MOD MIXCFG command to configure the IP address and ID of the gateway
Run the SET DIFPRI command to set priorities for differential services. (optional configuration)
Page27
Configuring R1 Interface
Run the SET RBSNAME command to set the BTS name Setup operator ID and site ID, run the following command
Run the ADD BTSINFO command to add the operator ID and site ID
Run the LST BTSINFO command to query the operator ID and site ID Run the MOD CARRIERBLOCKFLAG command to unblock the
corresponding carrier
Page28
Run the MOD CARRIERBASICINFO command to configure or modify the basic carrier information
Run the MOD CARRIERZONEINFO command to modify the zone information table
Run the ADD NBR command to add neighboring cells Run the RMV NBR command to remove neighboring cells
Page29
Log in to the LMT client of the ASN-GW Configure the local BTS information
Run the LST BTS command to query the information of the local BTS Run the ADD BTS command to add the information of the local BTS
Run the LST LBS command to query the information of the local BS Run the ADD LBS command to bind BSID with new BTSIP
Page30
Summary
Page31
Glossary
Page32
Thank you
www.huawei.com