Professional Documents
Culture Documents
4 x 8 Kbytes - EPROM/EEPROM/RAM Serial Interface - RS232/RS422 (Programmable) Digital Inputs 6 (TTL level), 10 (HCMOS), 7 (24 Volts) Digital Outputs 9 (TTL Level), 14 (HCMOS), 4 (24 Volts) I/O BUS 1 to 16 bits Serial, addressable up to 4096 bits.
50V) Analog Outputs 1 Channel, 10V. Digital Inputs 4 (24 Volts) Digital Outputs 1 (24 Volt) Relay contact Outputs 4 NC / NO Power supply: +5V, 15V, +24V
DAVR
Measures Generator voltage (7Vdc at 3 x 22Vac(line) input) Measures Generator current (7Vdc at 3 x 5Vac input)
(4.2Vdc at 3 x 3Vac input) Measures Sync voltage (7Vdc at 3 x 22Vac(line) input) Conditions Field Current (3Vdc nominal) Generates 12 interrupts per Cycle (sync to R-phase signal) Generates 12 interrupts per 20ms (during free run condition) Monitors frequency and voltage level of actual output. Program execution in CPU is monitored. Interrupt rate is monitored. Internal clock is monitored. Digital Inputs 5 (24 Volt), 6 (HCMOS) Digital Outputs 16 (HCMOS), 2 (24 Volts) Power supply: +5V, 15V, +24V
Pulse/Static inputs. Digital Outputs: 32 (24V) Self monitoring of the module. Module selection through 2 x 6-bit address Switch. (One switch for I/P address and Other for O/P) Power supply: +5V, +24V
DAVR
Processor 16 bit, TMS9995 (Texas Instruments) at 12Mhz. Memory 32 Kbytes Program memory (EPROM) Digital Inputs 16 (24 Volts) Digital Outputs 8 (24 Volts) Analog inputs 3 (Bipolar 10V) Analog Outputs 1(Bipolar 10V) Measures synchronizing input. Generates 6 firing pulses(angle 10min to 170max according to Control input with frequency compensation (10 Hz to 180Hz for rated freq of 50, 75, and 150Hz and 10 to 1.1x rated freq for rated freq >=300Hz). Control input as analog or Digital(selected thro 6 bit add. Switch) Controlling action selectable as Uc/If and Internal/external. Pulse blocking if any of the pulse is shorted to GND/other pulse. Reference value generator selectable as internal and external. Follow-up control with the additional reference value input. Power supply: +5V, 15V, +24V
0 to +10V or 10V (selectable) 6 channels used as sample and Hold inputs. Analog Outputs 2 (0 to 10V or 10V ; selectable) Module selection through 2 x 6 bit address switch. (One switch for I/P address and Other for O/P) Self checking for functioning of A/D and D/A chips. Power supply: +5V, 15V, +24V
DAVR
Used in Excitation Monitoring system only. Checks for the conduction of the Thyristor within 1 ms
time after giving the firing Pulse. Monitors up to 2 Thyristor Bridges. Failure of each Thyrisotr is indicated by lighting a corresponding LED on the Front Panel of the module. Master and Slave operation. Self testing of the firing pulse inputs and internal timing circuit. On failure of any firing pulse or timing circuit, entire monitoring is blocked. Module selection is through 4 bit address switch Power supply: +5V, 15V, +24V
DAVR
Used for data communication with CPU module Displays 4 lines of Hex or Decimal Data on LCD (4 x 16 char) Identifies automatically the target CPU.
available at 4 test points. Gets 24Vdc supply from the target CPU. RS232 printer Output port. 5 x 6 matrix keypads with de-bounce arrest circuit. 12 keys with dual function with the help of Shift key. Power supply: 24Vdc Failure of communication with CPU module is indicated by Transfer Error with periodic checking for communication.
DAVR
220Vdc(165V-312V), 0.85A (1.13A 0.6A) Output: +5V(5.0V to 5.2V) ,5A, 0.3A Base load. 15V( 14.21V to 15.8V), 1.0A, 0.1A Base load +24V(22.8V to 26.4V), 4.0A, 0.2A Base load Over voltage monitoring : 5.5 V on 5V output (instant tripping) Under Voltage monitoring : 4.7V, 13.9V, 21V (Trips after 10 s) Remote shutdown facility. Parallel connection of 2 modules with current balancing.
Rated Input: 3x100Vac .. 120Vac(Generator and synchronizing) 1x100Vac .. 120Vac(spare) Rated Frequency: 50/60Hz, Input voltage range: 0 to 130% of rated Input Frequency range: 80 to 120% of rated Input Current: Generator Current, Field Current Rated Input: 3 x 1A or 5A(Generator); 2 x 1A or 5A(Field) Rated Frequency: 50/60Hz, Input Current range: 0 to 150% of rated Input Frequency range: 80 to 120% of rated Output Voltage: 3 x 20..24Vac (Generator and Synchronizing) 1 x 20.. 24Vac(Spare) Phase Error input/output <1el Output Current: 3 x 3Vac (Generator) 1 x 3Vdc (Field)
selectable thro input resistance value No of outputs: 16 Output Voltage: 20Vdc to 23Vdc at 10ma load. Isolation: Input to Input : 2KVac for 1 Min Input to Output: 2.5KVac for 1 Min Power supply 24Vdc.