Professional Documents
Culture Documents
Internal Only
Reference document
package list BOM of each Circle. Site survey information table
Select the type of rack in packing list Installation material selection Select the Antenna from Packing List
Internal Only
Select
Select the type of rack in packing list Installation material selection Select the Antenna from Packing List
Internal Only
material cabinet
Almost all Sites in this project should have only one cabinet, which
means the site should only use one package of cabinet material
RF
Material cabinet
In RF Material cabinet mainly include the feeder and jumper installation materials. One action one cabinet when we distribute the goods.
Take
Internal Only
The package of cabinet material should be only 1, you can select the 12.13.2_Indoor Multitechnology Cabinet Installation Material SWAP site in the (Equipment Parameter)and site002 as below:
Internal Only
Internal Only
cabinet material box (if you do not put the whole box of
cabinet material in the DO).
Select the type of rack in packing list Installation material selection Select the Antenna from Packing List
Internal Only
There are 6 scenarios for choosing an Antenna the old antenna site single band antenna swap site Greenfield double band antenna swap
2G
Triple
11
Internal Only
selection
RCU module will be used only by UMTS system, the material code is 056501400132, and the name is AISG2.0RCU | 8110.40//86010148//ACU-A20N//ATM200-A20// RCU-V5002/ /MBRET-RCU-003. NOTE: Single Band- UMTS 65 deg is together with RCU moduleNo need RCU. Dual & Tri-band antenna are needed.
12
Select the type of rack in packing list Installation material selection Select the Antenna from Packing List
Internal Only
RSU selection
14
Select the type of rack in packing list Installation material selection Select the Antenna from Packing List
Internal Only
cable cable
Ground RSU
Feeder Feeder
Unused
Remaining CAT5
Cable(052522000041)