You are on page 1of 54

Numerical control (NC)

NC is a form of programmable automation in which the mechanical actions of a machine are controlled by a program containing coded alphanumeric data. The data represent relative positions between a work-head (cutting tool) and a work-part (object being processed). The work head is a or other processing apparatus, and the work-part is the. The program of instructions can be changed to process a new job. The capability to change the program makes NC suitable for low and medium production. The application of NC has two categories: (1)Machine tool applications, such as drilling, milling, turning, and other metal working; and (2) Non-machine tool applications, such as assembly, drafting, and inspection.

Basic Components of an NC System An NC system consists of three basic components: The program of instructions is step-by-step commands that direct the actions of the equipment - part program that refer to positions of a cutting tool relative to the worktable (fixture) with spindle speed, feed rate, cutting tool selection, and other functions.

The machine control unit (MCU) consists of a microcomputer and related control hardware that stores instructions and executes it by converting each command into mechanical actions of the equipment, one command at a time. The related hardware includes
components to interface with the processing equipment and Feedback control elements. The MCU also includes one or more Reading devices for entering part programs into memory.

The processing equipment accomplishes the processing steps to transform the starting workpiece into a completed part. Its operation is directed by the MCU,

COMPUTER NUMERICAL CONTROL


The physical size and cost of a digital computer have been significantly reduced while its computational capabilities have been substantially increased. Computer numerical control can be defined as an NC system whose MCU is based on a dedicated microcomputer rather than on a hard-wired controller. Features of CNC Computer NC systems include additional features beyond conventional NC. These features include: Storage of more than one part program. sufficient capacity to store multiple programs Various forms of program input. multiple data entry capabilities, such as punched tape (if the machine shop still uses punched tape), magnetic tape, floppy diskette, RS-232 communications with external computers, and manual data input

Program editing at the machine tool. process of testing and correcting a program can be done entirely at the machine site,. Fixed cycle and programming subroutines. to store frequently used machining cycles as macros that can be called by the part program Instead of writing the full instructions Interpolation. Positioning features for setup. The alignment task can be facilitated using certain features Positioning features for setup. The alignment task can be facilitated using certain features Cutter length and size compensation. Acceleration and deceleration calculations.

Communications interface. Allow the machine to be linked to other computers and computerdriven devices such as: (1) downloading part programs from a central data file (2) collecting operational data and (3) interfacing with peripheral equipment, Diagnostics. monitors certain aspects of the machine tool to detect malfunctions. Some of the common features of a CNC diagnostics system are:
Control start-up diagnostics. Malfunction and failure analysis. Extended diagnostics for individual components. Tool life monitoring. Preventive maintenance notices. Programming diagnostics

The Machine Control Unit for CNC consists of: (1) central processing unit, (2) memory, (3) I/O interface, (4) controls for machine tool axes and spindle speed, and (5) sequence controls for other machine tool functions. These subsystems are interconnected by means of a system bus,
Memory -ROM -Operating sys -RAM -Part programs Centra1 processing unit (CPU) Input/output interface -Operator panel -Tape reader

System bus Machine tool controls -Position control -Spindle Speed control Sequence controls -Coolant - Fixture clamping -Tool changer

Fig. Configuration of CNC machine control unit

Central Processing Unit. The central processing unit {CPU) is the brain of the MCU which manages the other components . it has three sections: (1) control section, (2) arithmetic-logic unit, and (3) immediate access memory. Memory., CNC memory can be divided into two Categories: (1) main memory consists of ROM and RAM devices; and (2) secondary memory used to store large programs and data files, which are transferred to main memory as needed. i.e floppy diskettes and hard disks Input/Output Interface. transmits and receives data and signals to and from external devices control panel display (CRT or LED). Controls for Machine Tool Axes and Spindle peed. These are hardware components that control the position and velocity (feed rate) of each machine axis as well as the rotational speed of the machine tool spindle. Sequence Controls for Other Machine Tool Functions. These auxiliary functions are generally on/off (binary) actuations, interlocks, and discrete numerical data.

Direct Numerical Control (DNC) DNC involved the control of a number of machine tools by a single (mainframe) computer through, connection and in real time. The program was transmitted to the MCU directly from the computer, one block of instructions at a time. The DNC computer provided instruction blocks to the machine tool on demand; when a machine needed control commands, they were communicated to it immediately.

The system consisted of four components: (1)central computer, (2)bulk memory at the central computer site, (3)set of controlled machines and (4)telecommunications lines to connect the machines to the central computer. In operation, the computer called the required part program from bulk memory and sent it (one block at a time) to the designated machine tool.
In addition, the central computer also received data feedback from the machines to indicate operating performance in the shop Thus, a central objective of DNC was to achieve two-way communication between the machines and the central computer.

Advantages (1) High reliability of a central computer; (2) Elimination of the tape and tape reader, (3) control of multiple machines by one computer; (4) improved computational capability for circular interpolation; (5) Part programs stored magnetically in bulk memory in a central location; and (6) Computer located in an environmentally agreeable location. However, it pays the high investment cost.
Distributed Numerical Control The configuration in the new DNC the central computer is connected to MCUs, which are themselves computers. This permits complete part programs to be sent to the machine tools, rather than one block at a time. Redundant computers improve system reliability compared with the original DNC. Some of the data and information sets included in the twoway communication flow are indicated.

Table: Flow of Info b/n Central Computer (CC) and M/c Tools in DNC

Data & Info Down loaded from Data & Info Loaded from M/c CC to M/c & Shop Floor & Shop Floor to CC

NC part programs
Machining cycle time for part program List of tools needed for job

Piece counts
Actual machining cycle times Tool life statistics

Data about when program was M/c up/down time statistics for last used m/c utilization and reliability assessment Machine setup instructions Product quality data

i.

There are several ways to configure a DNC system. The two types are: Switching network, The switching network uses a data switching box to make a connection from the central computer to a given CNC machine for downloading part programs or uploading data. Use of a switching box limits the number of machines that can be included in the DNC system. The limit depends on factors such as part program complexity, frequency of service required to each machine, and capabilities of the central computer

DNC Computer

MCU

MT

MCU

MT

Data switchin g box


MCU MT MCU MCU MT MT

ii.

LAN. In centralized structure arrangement, the computer system is organized as a hierarchy, with the central (host) computer coordinating several satellite computers that are each responsible for a number of CNC machines. Local area networks in different sections and departments of a plant often interconnected in plantwide and corporate-wide networks Each type has several possible variations.
DNC Computer

Satellite Computer

Satellite Computer

MCU

MT

MCU

MT

MCU

MT

MCU

MT

Application of NC
The operating principle of NC has many applications. The applications divide into two categories: machine tool applications (those usually associated with metal work industry) and non-machine tool applications (diverse group of operations in other industries). Machine Tool Applications The most common applications of NC are in machine tool control. Machining was the first application of NC, and it is still one of the most important commercially.

Machining Operations and NC Machine Tools. Machining is a mnfg process in which the geometry of the work is produced by removing excess material. By controlling the relative motion between a cutting tool and the workpiece, the desired geometry is created. There are four common types of machining operations: (a) Turning, (b) Drilling, (c) Milling, and (d) Grinding.

Each of the four machining operations are carried out at a certain combination of speed, feed, and depth of cut, collectively called the cutting conditions for the operation. Each process is traditionally done on a machine tool designed to perform that process. The common NC machine tools and with their typical features are:
NC lathe requires two-axis, continuous path control, either to make straight or contour turning. NC boring mill requires continuous path, two-axis control for creating internal cylinder NC drill press use point-to-point control of the spindle / drill bit) and two axis (x-y) control of the worktable. Some NC drill presses have turrets containing six or eight drill bits. NC milling machine require continuous path control to perform straight cut or contouring operations. Cylindrical grinder has continuous path two-axis control, similar to an NC lathe.

NC Application Characteristics
In general, NC technology is appropriate for low-to-medium production of medium-to-high variety product. Certain part characteristics have come to be identified as being most suited to the application of NC. These are: Batch production. NC is most appropriate for parts produced in small or medium lot sizes as dedicated automation would be uneconomical for these quantities and Manual production would require many separate machine setups. Repeat orders. Batches of the same parts are produced at random or periodic intervals. Complex part geometry. such as those found on airfoils and turbine blades, circles and helixes. Much metal needs to be removed from the work part. This condition is often associated with complex part geometry to fabricate large structural sections with low weights. Many separate machining operations on the part. many machined features requiring different cutting tools, such as drilled and/or tapped holes, slots, flats, and so on. The part is expensive. When the part is expensive, and mistakes in processing would be costly .

NC for Other Metalworking Processes include:


Punch presses for sheet metal hole punching. Presses for sheet metal bending. Welding machines. Both spot and continuous arc welding Thermal cutting Machines, such as oxy-fuel cutting, laser cutting, and plasma arc cutting. Tube bending machines to control the location and the angle of the bend such as frames for bicycles. Other NC Applications The principle of NC has a host of other applications. However, the applications are not always referred to "numerical control. Some of NC-type controls are: Wire wrap machines Component insertion machines Drafting machines Coordinate measuring machine Tape laying machines for polymer composites Filament winding machines for polymer composites

Advantages and Disadvantages of NC


Advantages of NC Nonproductive time is reduced. Greater accuracy and repeatability. Lower scrap rate. Inspection requirements are reduced. More complex part geometries are possible. Engineering changes can be accommodated more gracefully, Simpler fixtures are needed, Shorter manufacturing lead times. Reduced parts inventory, Less floor space required. Operator kill-level requirements are reduced, Disadvantages of NC. Higher investment cost. Higher maintenance effort. Part programming. Higher utilization of NC equipment nn

NC RART PROGRAMMING
NC part programming consists of planning and documenting the sequence of processing steps to be performed on an NC machine. The programmer must have knowledge of machining or other processing technology as well as geometry and trigonometry. Part programming uses a variety of procedures ranging from highly manual to highly automated methods. The methods are:
Manual part programming, Computer-assisted part programming, part programming using CAD/CAM, and Manual data input.

NC Coding System The program of instructions is communicated to the machine tool using a coding system. This NC coding system is the low-level machine language that can be understood by the MCU. Words in an instruction block are intended to convey all of the commands and data needed for the machine tool to execute the move defined in the block. The words in a block are usually given in the following order:
Sequence number (N-word) Preparatory word (G-word); Coordinates (X-, Y-, Z-words for linear axes, A-, B-, C-words for rotational axis Feed rate (F-word) Spindle speed (S-word) Tool selection (T -word) Miscellaneous command (M-word); see the table for definition of M-words) End-of-block (EOB symbol)

NC coordinate system To program the NC equipment, there are two axis systems For flat and prismatic workparts - The axes are three linear axes (x, y, z) and three rotational axes (a, b, c), to specify angular positions and orient workpart or tool For Rotational parts - are associated with NC lathes and turning centers. The path of the cutting tool relative to the rotating workpiece is defined in the x-z plane.

Programming of these machine tools consists of little more than specifying a sequence of x- y coordinates. The origin of the coordinate axis system should be located at one of the corners or at the center of symmetry. When the tool has been accurately positioned at the target point, the operator indicates to the MCU where the origin is located for subsequent tool movements.

Motion Control Systems


Some processes are performed at discrete locations (e.g., drilling and spot welding) and others are carried out while the workhead is moving (e.g., turning and continuous arc welding), following a straight line path or a circular or other curvilinear path. Motion control systems for NC can be divided into two: (1) point-lo-point / positioning systems Move the worktable to a programmed location without regard for the path taken to get to that location some processing action is accomplished at the location. Thus, the program consists of a series of point locations.

2. Continuous path systems refer to continuous simultaneous control of two or more axes. This controls tool trajectory relative to the workpart, thus enabling to generate angular surfaces, two-dimensional curves, or three-dimensional contours in the workpart. It can be straight-cut or contouring

One of the important aspects of contouring is interpolation. The paths that a contouring-type NC system is required to generate often consist circular arcs and other smooth nonlinear shapes. the problem in generating these shapes using NC equipment is that they are continuous, whereas NC is digital. To cut along a circular path, the circle must be divided into a series of straight line segments that approximate the curve. To ease the burden, interpolation routines have been developed that calculate the intermediate points to be followed by the cutter to generate a particular mathematically defined or approximated path.

interpolation methods are include: (1) Linear interpolation, (2) circular interpolation, (3) helical interpolation, (4) parabolic interpolation, and (5) cubic interpolation. The interpolation module in the MCU permits to generate machine instructions for paths using relatively few input parameters

Numerical Control Interpolation Methods for Continuous Path Control Linear interpolation. for straight line path is to be generated in continuous path NC. Requires the beginning point and end points of the straight line. Circular interpolation. programming of a circular arc by specifying the starting point, the endpoint, the center or radius of the arc, and the direction of the cutter along the arc. Helical interpolation. combines the circular interpolation scheme for two axes with linear movement of a third axis. This permits the definition of a helical path in three-dimensional space. Parabolic and cubic interpolations. These routines provide approximations of free form curves using higher order equations.

G-words or preparatory words consist of two numerical digits with "G" prefix that prepare the MCU for the instructions and data contained in the block so that the subsequent data can be properly interpreted. In some cases, more than one G-word is needed. M-words are used to specify miscellaneous or auxiliary functions that are available on the machine tool such as starting and stopping the spindle rotation, turning the cutting fluid on or off.

Common Word Prefixes Used in Word Address Format


Word Prefix N G X, Y, Z U, W A, B, C R Example N01 G21 X75.0 U25.0 A90.0 R100.0 Function Sequence number; Preparatory word; Coordinate data for three linear axes Coor. data for incremental moves in turning Coor. data (deg) for rotational axes x; y ; and z. Radius of arc; in circular interpolation. It can also be used to cutter radius

I, J, K.
F

I32 J67
G94 F40

Coord. values of arc center, in circular interpolation


Feed rate per minute or per revolution

S
T D P M

S0800
T14 005 P05 R15.0 M03

Spindle speed in rpm or %age of max. speed


Tool selection, in m/cs with auto tool changer. Tool dia. in contouring moves for offsetting Used to store cutter radius data in offset register number. Miscellaneous command

TABLE - Common G-words (Preparatory Word) G-word G00 G01 G02; G03 G04 G10 G17; G18; G19 G20 G28 G32 G41, G42 G50 G90; G91 G94, G95 G98; G99 Function P-t-p movement (rapid) b/n previous point and end point Linear interpolation movement. Circular interpolation, clockwise counterclockwise respectively. Dwell for a specified time Input of cutter offset data, followed by a P-code and an R-code. Selection of x-y, x-z and y-z plane in milling respectively. Input values specified in inches Return to reference point. Thread cutting in turning. Cutter offset compensation, left and right of part surface rspvly. Specify location of origin relative to starting location of tool. Programming in absolute incremental coordinates respectively. Specify feed/minute and feed/revolution respectively Specify feed/minute and feed/revolution respectively in turning.

Common M-words Used in Word Address Format


M-Word
M00; M01 M02 M03; M04

Function
Program stop; and Optional program stop respectively End of .program. Machine stops Start spindle in clockwise and counterclockwise direction respectively .

M05
M06 M07; M08; M09 M10; M11 M13; M14 M17 M19 M30

Spindle stop
Execute tool change, either manually or automatically. Turn cutting fluid on flood, on mist and off respectively . Automatic clamping and unclamping of fixture, machine slides, etc respectively. Start spindle in clockwise and counterclockwise direction and turn on cutting fluid respectively. Spindle and cutting fluid off. Turn spindle off at oriented position. End of program. Machine stop.

Manual Part Programming In manual part programming, the programmer prepares the NC code using the low-level machine language previously described. the part program is a block-by-block listing of the machining instructions for the given job, formatted for the particular machine tool, most suited for point-topoint machining. In preparing the NC part program, the part programmer must initially define the origin of the coordinate axes and then reference the succeeding motion commands to this axis system. This is accomplished in the first statement of the part program.

EXAMPLE Point-to-Point Drilling

Fig. Aluminum Sample part for NC part programming

This example presents the NC part program for drilling the three holes in the sample part. The x-, y-, and z-axes are defined. The program begins with the tool positioned at at x = 0, y = -50, and z =10 (target point). NC Part Program Code Comment N001 G21 G90 G92 X0 Y-050.0 Z0.10.0; Define origin of axes. N002 G00 X070.0 Y030.0; Rapid move to first hole location. N003 G01 G95 Z-15.0 F0.05 Sl000 M03; Drill first hole. N004 G01 Z010.0; Retract drill from hole. N005 G00 Y060.0; Rapid move to second hole.

N006 G01 G95 Z-15.0 FO.05; N007 G01 Z010.0; N008 G00X120.0 Y030.0; N009 G0l G95 Z-15.0 F0.05; N0l0 G0l Z0l0.0; N0ll G00 X0 Y-050.0 M05; NO12 M30;

Drill second hole. Retract drill from hole. Rapid move to third hole location. Drill third hole. Retract drill from hole. Rapid move to target point

Fig. Sample part aligned relative to (a) x- and y-axes, and (b) z-axis. Coordinates are given for significant features in (a).

EXAMPLE -Two-Axis Milling


The part is fixtured so that its top surface is 40mm above the surface of the machine tool table. Thus, the origin will be 40 mm above the table surface. Cutter diameter data has been manually entered into offset register 0.5. At the beginning, the cutter will be positioned at a target point located at x = 0, y = -50, and z = +10. NC Part Programme Code Comment N00I G2l G90 G92 X0 Y-050.0 Z0l0.0; Define origin of axes. N002 G00 Z-025.0 Sl000 M03; Rapid to cutter depth, turn spindle N003 G01 G94 G42 Y0 D0S F40; Engage part, start cutter offset. N004 G0I Xl60.0; Mill lower part edge. N005 G0I Y060.0; Mill right straight edge. N006 G 17 G03 X130.0 Y090.0 R030.0; Circular interpolation around arc. N007 G0I X035.0; Mill upper part edge. N008 G0I X0 Y0; Mill left part edge. N009 G40 G00 X-040.0 M05; Rapid exit from part, cancel offset. N0l0G00 X0 Y-050.0; Rapid move to target point. N0ll M30; End of program, stop machine.

Computer-Assisted Part Programming


Manual part programming can be time consuming, tedious, and subject to errors for parts possessing complex geometries or requiring many machining operations. It is advantageous to use computer-assisted part programming. A number of languages have been developed that saves time and results in a more-accurate and efficient part program Computer-assisted part programming uses English-like statements that are subsequently translated by the computer into the low level machine code.

Tasks are divided between the human and the computer. The two main tasks of the programmer are: (1) defining the geometry of the workpart and (2) specifying the tool path and operation sequence.

Part Prog with Automatically Programmed Tooling (APT) To program in APT, the part geometry is defined; then tool is directed. Thus, there are four types of statements in the APT language: 1. Geometry statements, also called definition statements, define the part geometry elements. 2. Motion commands are used to specify the tool path. 3. Post-processor statements control operation, such as speed and feeds, tolerance and actuate other capabilities of the machine tool. 4. Auxiliary statements, used to name the part program insert comments in the program and accomplish similar functions. These statements are constructed of APT vocabulary words, symbols, and numbers, all arranged using appropriate punctuation. APT vocabulary words consist of six or fewer characters. The characters are alphabet with a very few numerical digits. APT vocabulary contains major words and minor words.

Defining the Part Geometr: work piece is composed of basic geometric elements and mathematically defined surfaces. Nearly any component that can be conceived by a designer can be described by points, straight lines, planes, circles, cylinders, and others. the task is to identify and enumerate the geometric elements of the part in terms of its dimensions and locations relative to other elements. The general form of an APT geometry statement is:

SYMBOL = GEOMETRYTYPE/descriptive data example; P1 = POINT /20.0,40.0,60.0 The statement consists of three sections: 1. 2.
3.

The symbol used to identify the geometry element. The APT major word that identifies the type of geometry element. The descriptive data that define the element precisely, completely and uniquely (dimensional and position).

Points. easily done by designating its x-, y, and z-coordinates and intersection: P1 = POINT /20.0,40.0,60.0 P2 = POINT/INTOF, L1, L2 Lines. A line defined in APT is considered to be of infinite length in both directions. Also, APT treats a line as a vertical plane that is perpendicular to the x-y plane. L3 = LINE/P3, P4 L4 = LINE/P5, PARLEL, L3 Planes. A plane can be defined by specifying three noncollinear points through which the plane passes. It can also be defined as being parallel to previously defined plane. PLI = PLANE/P1, P2, P3, PL2 = PLANE/P2, PARLEL, PL1 Circles. In APT, a circle is considered to be a cylindrical surface that is perpendicular to the x-y plane and extends to infinity in the z-direction. C1 = CIRCLE/CENTER, P1, RADIUS, 25.0 C2 = CIRCLE/P4, P5, P6

Four important APT rules: 1. Coordinate data must be specified in the order x, then y, then z. 2. Any symbols used as descriptive data must have been previously defined; 3. A symbol can be used to define only one geometry element. 4. Only one symbol can be used to define any given element. Specifying tool path and operations sequence. The tool path consists of a sequence of connected line and arc segments, using previously defined geometry elements to guide the cutter. Motion Commands. All APT motion statements follow a common format, The format is: MOTION COMMAND/descriptive data e.g GOTO/P1 What move the tool should make (GOTO) and tell the tool where to go (P1). At the beginning of the sequence of motion statements, the tool must be given a starting point (target point). FROM (initial point) /PTARG; FROM/-20.0, -20.0,0 For point-to-point motions, there are only two commands: GOTO (to a particular point location) and GODLTA (incremental move). GOTO/P2, GOTO/25.0, 40.0, 0

Contouring motion commands are more complicated than PTP commands. The tool is controlled by three surfaces: Drive surface guides the side of the cutter. Part surface bottom nose of the tool is guided on. Check surface stops the forward motion of the tool. Actual or previously defined surface may be selected
There are four APT modifier words in the descriptive data (TO, ON, PAST, and TANTO)

There are four APT modifier words in the descriptive data (TO, ON, PAST, and TANTO)

After the tool reaches the check surface the next move involve a right or left turn or other. There are six motion words, GOLFT - left turn relative to the last move. GORGT - a right turn relative to the last move. GOFWD - move forward relative to the last move. GOBACK - reverse direction relative to the last move. GOUP - move upward relative to the last move. GODOWN - move down relative to the last move.

1. 2. 3. 4.

5.
6.

Example FROM/PTARG GO/TO, PL1, TO, PL2, TO PL3 GORGT/PL3, PAST, PL4 GO/TO, L1, TO, PL2, TO L3 GORGT/L3, PAST, L4 Postprocessor and Auxiliary Statements. control the operation of the machine tool and play a supporting role in generating the tool path. Such statements are used to define cutter size, specify speeds and feeds, turn coolant flow on and off, and control other features of the particular machine tool. POSTPROCESSOR COMMAND/descriptive data examples : UNITS/MM or INCHES; INTOL/0.02 ; OUTTOL/0.02 ; CTTER/20.0 ; SPINDL/1000, CLW ; FEDRAT/40, RPM; RAPID; COOLNT, FLOOD; LOADTL/DI; DELAY/3D

Auxiliary statements are used to identify the part program, specify processor, insert remarks and so on. PARTNO SAMPLE PART NUMBER ONE MACHIN/ specify the post-processor, which specifies the machine tool. CLPRNT; "cutter location prints," REMARK to insert explanatory comments. FINI indicates the end of an APT program.

Computer Tasks in Computer-Assisted Part Programming: consists of: input translation, arithmetic and cutter offset computations, editing, and post-processing. The input translation module converts the coded instructions into computer-usable form, preparatory to further processing: Syntax check Assigning a sequence number to each APT statement in the program; Converting geometry elements into a suitable form for computer processing; and Generating an intermediate file called PROFIL that is utilized in subsequent arithmetic calculations.

The arithmetic module consists of a set of subroutines to perform the mathematical computations required to define the part surface and generate the tool path. The computations are performed on the PROFIL file. The output of this module is CLFILE "cutter location file.", tool path data. In editing, the CLFILE is edited, and a CLDATA is generated which provides readable data on cutter locations and machine tool operating commands. Another APT instruction processed is TRACUT, "transform cutter locations" Which allows a tool path sequence to be transformed from one coordinate system to another. The output is a part program that can be post-processed for the given machine tool. In post-processing, cutter location data and machining commands in the CLDATA file are converted into lowlevel code that can be interpreted by the NC controller. The output is a part program consisting of G-codes, x-, y-, and z- coordinates, S, F, M, and others in word address format.

NC Part Programming Using CAD/CAM


Advanced CAD/CAM systems automate portions of defining the part geometry and specifying tool path. Geometry Definition Using CAD/CAM. If a CAD/CAM system is used, a computer graphics model is developed and stored in database which contains geometric, dimensional, and material specifications for the part. When the same CAD/CAM system, that has access to the same CAD data base in which the part model resides is used part geometry model is retrieved, and use that model to construct the appropriate cutter path. The advantage is that it eliminates the time-consuming steps of geometry definition. After retrieving the model, the procedure is to label the geometric elements that will be used during part programming - variable names (symbols) given to the lines, circles, and surfaces that comprise the part. Most systems have automatic labeling capacity and display the labels on the monitor so that it can then be referred to those labeled elements during tool path construction.

Tool Path Generation Using CAD/CAM. The first step is to select the cutting tool from tool libraries. The programmer decides on appropriate tool for the operation and specify it for the tool path. This permits tool offset calculations. The basic approach in generating the tool path involves the use of the interactive graphics system to enter the motion commands one-by-one, similar to computer-assisted part programming. Individual statements in APT are entered, and the CAD/CAM system provides an immediate graphic display of the action resulting from the command, thereby validating the statement. When the complete part program has been prepared, the CAD/CAM system can provide animated simulation of the program for validation purposes. A more advanced approach is to use automatic software modules available on the CAD/CAM system. These modules are subroutines in the NC programming packages that can be called and the required parameters given to execute the machining cycle.

Common NC Modules for Automatic Programming are: Profile milling Pocket milling Lettering (engraving, mill) Contour turningFacing (turning) Threading (Turning)

Manual Data Input/ conversational programming


Manual and computer-assisted part programming require a relatively high degree of formal documentation and procedure. CAD/CAM part programming automates a substantial portion of the procedure, but a significant commitment in equipment, software, and training is required. A potential method of simplifying the procedure is to have the machine operator perform the part programming task at the machine tool. This is called manual data input (MDI). MDI is perceived as away for the small machine shop to introduce NC without a need to acquire special NC part programming equipment and to hire a part programmer. MDI permits to make a minimal initial investment to begin the transition to modern CNC technology.

Communication between the machine operatorprogrammer and the MDI system is accomplished using a display monitor and alphanumeric keyboard. Entering the programming commands into the controller is typically done using a menu-driven procedure in which the operator responds to prompts and questions posed by the NC system. A computer graphics capability such as tool path and animation of the tool path sequence is included to visualize the machining operations and verify the program. The skills needed are reading engineering drawing be familiar with the machining process. Efficient use of the system requires that programming for the next part be accomplished while the current part is being machined. Most MDI systems permit these two functions to be performed simultaneously to reduce changeover time between jobs.

You might also like