Professional Documents
Culture Documents
---Dersun--- 1
Contents
• Definition
• Applications
• Typical material used in VLSI
• Metallization methods
• Metallic thin film measurement
• Future Trends
---Dersun--- 2
Definition
• Metallization A processes that deposit
metal thin film on the wafer surface.
---Dersun--- 3
Applications
• Contact electrodes
• Interconnection
• Plug and connection
• Bonding pad
---Dersun--- 4
Application: Contact Electrode
Metal 1, Al•Cu
W
BPSG
STI n+ n+ USG p+ p+
P-Well N-Well
P-epi
P-wafer
---Dersun--- 5
Application: Interconnection
---Dersun--- 6
Application: Plug and Connection
Ti/TiN SiN CoSi2 Ta or TaN
M1 Cu Cu Cu
FSG
FSG
W
PSG W
STI n+ n+ USG p+ p+
P-Well N-Well
P-Epi
P-Wafer
---Dersun--- 7
Contents
• Definition
• Applications
• Typical material used in VLSI
• Metallization methods
• Metallic thin film measurement
• Future Trends
---Dersun--- 8
Metallization material: Criteria
• Low resistivity
• Good adherence and low stress
• Smooth for high resolution patterning
• Compatible with VLSI deposit and etch process
• High resistance to electro-migration
• Low diffusivity in Si and SiO2
• Stable and no degradation in VLSI lifetime
---Dersun--- 9
Four best conducting metal
• The resistivities of best conducting metal
– Silver 1.6 µΩ⋅cm
– Copper 1.7 µΩ⋅cm
– Gold 2.2 µΩ⋅cm
– Aluminum 2.65 µΩ⋅cm
• Aluminum was used for gate before mid-1970
• Al was the most commonly used metal in
VLSI
---Dersun--- 10
Most Common Used Material in
Modern VLSI Metallization
• Aluminum and aluminum alloys
• Polysilicon and silicide
• Titanium (Ti) and titanium alloys (TiSi)
• Tungsten (W)
• Cobalt (Co)
• Copper (Cu)
• Tantalum (Ta)
---Dersun--- 11
Common Conducting Thin Films in
VLSI
• Aluminum and Aluminum alloy
• Polysilicon and Poly-Silicides
• Titanium and Ti-silicide
• Cobalt and Co-Silicide
• Titanium Nitride
• Tungsten
• Copper
• Tantalum
---Dersun--- 12
Some Facts About Aluminum
×
°
´
Name Aluminum
Symbol Al
Atomic number 13
Atomic weight 26.981538
Discoverer Hans Christian Oersted
Discovered at Denmark
Discovery date 1825
Origin of name From the Latin word "alumen" meaning "alum"
Density of solid 2.70 g/cm3
Molar volume 10.00 cm3
Velocity of sound 5100 m/sec
Hardness 2.75
Electrical resistivity 2.65 µΩ cm
Reflectivity 71%
Melting point 660 C
Boiling point 2519 C
Thermal conductivity 235 W m-1 K-1
Coefficient of linear thermal expansion 23.1 10-6 K-1
Etchants (wet) H3PO4, HNO4, CH3COOH
Etchants (dry) Cl2, BCl3
CVD Precursor ---Dersun--- Al(CH3)2H 13
Typical Aluminum Deposition
Equipment
Wafers
Aluminum
Charge Aluminum Vapor
10-6 Torr
---Dersun--- 15
Junction Spike
Al Al Al
SiO2
p+ p+
n-type Silicon
---Dersun--- 16
Prevention of Junction Spike
• Method A: ~1% of Si in Al saturates it.
---Dersun--- 17
Mechanism of Al Electro-migration
---Dersun--- 18
Electro-migration Effects
• Electro-migration will tear the metal line apart
and make the metal line narrower.
• Narrow metal line cause higher current density
– Aggravates the electron bombardment
– Causes further aluminum grain migration
– Eventually will break of the metal line
• Affect the IC chip reliability
• Aluminum wires: fire hazard of old houses
---Dersun--- 19
Prevention of Electro-migration
• Alloy a small percent of copper with
aluminum, can significantly improve
electro-migration resistance of aluminum
• Copper serves as “glue” between the
aluminum grains and prevent them from
migrating due to the electron bombardment
• Al-Si-Cu alloy was used
• Al-Cu (0.5%) is very commonly
---Dersun--- 20
Conducting Thin Films
• Aluminum and Aluminum alloy
• Polysilicon and Poly-Silicides
• Titanium and Ti-silicide
• Cobalt and Co-Silicide
• Titanium Nitride
• Tungsten
• Copper
• Tantalum
---Dersun--- 21
Applications of Titanium
Al-Cu
Ti
W
PSG
Ti
n+
TiSi 2
---Dersun--- 22
W Plug and TiN/Ti
Barrier/Adhesion Layer
Tungsten
TiN/Ti
Oxide
---Dersun--- 23
Contents
• Definition
• Applications
• Typical material used in VLSI
• Metallization methods
• Metallic thin film measurement
• Future Trends
---Dersun--- 24
Metallization Methods
---Dersun--- 25
Physical Vapor Deposition(PVD)
---Dersun--- 26
PVD Methods
• Evaporation
• Sputtering
---Dersun--- 27
Evaporation Methods
• Filaments
• Flash hot plate
• Electron beam
---Dersun--- 28
Thermal Evaporator
Wafers
Aluminum
Charge Aluminum Vapor
10-6 Torr
Wafers
---Dersun--- 31
DC Diode Sputtering
-V
Target
Argon Plasma
Wafer Chuck
---Dersun--- 32
Principle of Sputtering
Ar+
Momentum transfer will dislodge surface
atoms off
---Dersun--- 33
Collimated Sputtering
• Used for Ti and TiN deposition
• Collimator allows metal atoms or molecules to
move mainly in vertical direction
• Reach the bottom of narrow contact/via holes
• Improves bottom step coverage
---Dersun--- 34
Collimated Sputtering
Magnets
Target
Plasma
Collimator
Film
Via holes
---Dersun--- 35
Inductive Coupled Sputtering
• Ti, TiN, Ta, and TaN deposition
• Ionize metal atoms through inductive
coupling of RF power in the RF coil
• Positive metal ions impact with the
negatively charged wafer surface vertically
• Improving bottom step coverage
• Reduce contact resistance
---Dersun--- 36
Inductive Coupled Sputtering
−V
Target
RF
Via Hole
---Dersun--- 37
Cluster Tool, Aluminum CVD/PVD
Pre-clean Ti/TiN PVD
---Dersun--- 38
Endura® PVD System
PVD
Target
PVD
Chamber
CVD
Chamber
---Dersun--- 39
Sputtering vs. Evaporator
Sputtering Evaporator
---Dersun--- 41
Properties of CVD Metallization
• Good step coverage and gap fill capability
– Can fill tiny contact holes to make connections
between metal layers.
– Widely used to deposit metal
• Poorer quality and higher resistivity than
PVD metal thin films.
– Used for plugs and local interconnections
– Not applied for global interconnections
---Dersun--- 42
Metal CVD Process Steps
• Wafer into the chamber
• Slip valve closes
• Set up pressure and temperature, with secondary process
gas(es)
• All process gases flow in, start deposition
• Termination of the main process gas. Secondary process
gas(es) remain on
• Termination of all process gases
• Purge chamber with nitrogen
• Slip valve opens and robot pull wafer out
---Dersun--- 43
CVD Metallization Methods
• Thermal CVD heat provides free energy
needed for the chemical reaction
• PECVD plasma enhanced CVD process
• Typically used for W, WSix, Ti, and TiN
• RF system is used for plasma dry clean of
the process chamber
---Dersun--- 44
PECVD Chamber
RF Power
Process Gases
Process
Chamber Wafer
Heated plate
To pump
---Dersun--- 45
PVD vs. CVD
• CVD: Chemical reaction on the surface
• PVD: No chemical reaction on the surface
---Dersun--- 47
Metallization Methods
---Dersun--- 48
Contents
• Definition
• Applications
• Typical material used in VLSI
• Metallization methods
• Metallic thin film measurement
• Future Trends
---Dersun--- 49
Metal Thin Film Measurements
• Thickness.
• Stress
• Reflectivity
• Sheet resistance
---Dersun--- 50
Summary
• Mainly application: interconnection
• CVD (W, TiN, Ti) and PVD (Al-Cu, Ti, TiN)
• Al-Cu alloy is still dominant
• Need UHV for Al-Cu PVD
• W used as plug
• Ti used as welding layer
• TiN: barrier, adhesion and ARC layers
• The future: Cu and Ta/TaN
---Dersun--- 51