Professional Documents
Culture Documents
com
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
pti! "T# $00 %&00"002
Con'iguration (uide
)) *2000 +e, LCT
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Preface
Con'igure the radio lin1s o' the pti! "T# $00 %&00"002.
T23 radio lin1 7including -2H radio lin1 and /2H radio lin18
Hy,rid services o' #ative 4& services and #ative 4thernet services carried ,y the
Hy,rid radio 7supporting the A3 'unction8
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Types o' 4thernet -ervices
4)Line services
4)LA# services
Configuration Proceure
Configuration Tas"s
5. Con'iguring T23 -ervices
6. Con'iguring 4thernet -ervices
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
/rocedure 'or Con'iguring a "adio Lin1
Configuring the
Radio link mode
Configuring the
IF/ODU info. of a
radio Link
3ethod &0
Create an #4 ,y
using the search
method.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #4
3ethod 20
Create an #4 ,y
using the
manual method.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
3odi'ying the #4 92>#ame
Modify the NE
ID. The ID of an
NE in the
netork mu!t "e
uni#ue.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an !/9C /rotection (roup
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4 Creating an !/9C /rotection
(roup
9' an 2* supports only one T>" spacing, set this parameter to the de'ault value 0. The de'ault transmission status o' an
2* is 5n3ute.
-et AT/C parameters according to the networ1 planning documents. #ote that ,e'ore the antenna alignment, 6TPC
7na8%e must ,e set to 1isa8%e.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
-etting the Hy,rid>A3
Attri,utes o' the !/9C Hy,rid "adio Lin1
$et AM Enable Status a%%ording to the netork &lanning do%ument!. Note that "efore the antenna alignment' make !ure
that AM Enable Status i! !et to Disabled.
(hen 6* 7na8%e Status is set to 7na8%e, set *ou%ation *oe of the 9uarantee 6* Capacity and *ou%ation
*oe of the $u%% 6* Capacity according to the networ1 planning documents.
E1 Capacity !&e%ifie! the num"er of E) !er*i%e! that %an "e tran!mitted in +y"rid mi%roa*e frame!. $et thi! &arameter
a%%ording to the de!ign. Note that the num"er of E) !er*i%e! at "oth end! of a radio link ho& mu!t "e the !ame,
otheri!e' the !er*i%e! are una*aila"le.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #=&
/rotection (roup
See ne't page
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating an #=&
/rotection (roup
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating a &=&
/rotection (roup
$ele%t the ).) SD/FD/SB &rote%tion
from the Working Mode dro&/don li!t.
U!e the
default
*alue.
$ele%t a orking IF "oard and a
&rote%tion IF "oard. In the %a!e of ).)
FD/$D &rote%tion grou&' the orking
"oard and &rote%tion "oard! mu!t "e
%onfigured in to &aired !lot!.
Con'iguring the
"? lin1 mode
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring the
"? radio lin1
Con'iguring the
9?>2* 9n'ormation
o' a "adio Lin1
Con'iguring
an #4
Configuring the
IF/ODU Information of a Radio Link
+hen T23 services need to ,e transmitted on a radio lin1, you need to con'igure cross)connections ,etween the
service timeslots on the corresponding service ,oards and the service timeslots on the corresponding 9? ,oards. The
timeslots 'or the T23 services on 9? ,oards are closely related to the type o' the radio services transmitted ,y the 9?
,oard and the radio capacity.
T1* Raio
+hen the 9? ,oard wor1s in /2H radio mode, i' the microwave capacity is nA4&, the 'irst to nth %C)&2 timeslots
on the 9? ,oard are availa,le and correspond to the 'irst to nth 4&s that are transmitted over radio. 9' a cross)
connection is con'igured ,etween an 4& port on a service ,oard and the second %C)&2 timeslot in %C6)& on the
9? ,oard, the 4& services that are accessed through the 4& port are sent to the second 4& timeslot that is
transmitted over radio. 9' the radio capacity is 45, only the 'irst %C)5 timeslot in %C6)& on the 9? ,oard is
availa,le and corresponds to the 45 channel that is transmitted over radio.
+hen the 9? ,oard wor1s in -T3)& mode, all the timeslots in %C6)& on the 9? ,oard are availa,le and
correspond to the timeslots in the %C)6 that is transmitted on radio.
0y8ri Raio
+hen the 9? ,oard wor1s in -T3)& mode, all the timeslots in %C6)& on the 9? ,oard are availa,le and
correspond to the timeslots in the %C)6 that is transmitted on radio. 9' an 9? ,oard wor1s in Hy,rid radio mode
and the 71 Capacity is set to n in 0y8ri/6* Configuration, the 'irst to nth %C)&2 timeslots on the 9? ,oard
are availa,le and correspond to the 'irst to nth 4& timeslots that are transmitted over radio. ?or eAample, i' the
4& capacity is CDA4&, only the 'irst to siAty)third %C)&2 timeslots in %C6)& and the 'irst to twel'th %C)&2 timeslots
in %C6)2 on the 9? ,oard are availa,le. 9' a cross)connection is con'igured ,etween an 4& port on a service
,oard and the second %C)&2 timeslot in %C6)& on the 9? ,oard, the 4& services that are accessed through the
4& port are sent to the second 4& timeslot that is transmitted over radio.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'iguring Linear 3-/ 7ptional8
9n the case o' &=& protection con'iguration or &=& linear 3-/, you need to con'igure T23 services on
the wor1ing channel only. 9n the case o' #=& protection con'iguration or &0# linear 3-/, you also need
to con'igure the eAtra services on the protection channel i' re<uired.
+hen con'iguring the -#C/ services, you need to con'igure the cross)connections
o' the -#C/ services.
The cross)connection o' -#C/ services is a cross)connection that a wor1ing source and a
protection source correspond to a service sin1.
This parameter indicates the level o' a service. 9' the service is
an 4& service or a data service that is ,ound with %C)&2 paths,
set this parameter to %C&2. 9' the service is a data service that is
,ound with %C)5 channels, set this parameter to %C5. 9' all the
services in a %C)6 pass through the #4, set this parameter to
%C6.
-et the source slot, source port, source %C6, and source
timeslot o' the wor1ing source and protection source. The
wor1ing service source and protection service source can ,e the
9? ,oard or the line ,oard. However, the 9? &=E protection ,oard
cannot ,e used as the source o' -#C/ services.
-et the sin1 slot, sin1 port, sin1 %C6, and sin1 timeslot o' the
-#C/ service sin1. 9' Sin" is set to the slot o' the tri,utary ,oard,
Sin" Port and Sin" VC; are unavaila,le.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Service Types of the OptiX RTN
900 V100R002
2. Configuring Raio !in"s
:. Configuring T1* Services
;. Configuring 7thernet Services
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con'igurations o' %arious -ervices
P2P/V!6N 7.!ine >in>.&ase 7.
!ine
#777 )02.1 8rige.
8ase 7.!6N
#777 )02.14 8rige.
8ase 7.!6N
#777 )02.1a 8rige.
8ase 7.!6N
& -etting the
parameters o'
4thernet ports
-etting the
parameters o'
4thernet ports
-etting the
parameters o'
4thernet ports
-etting the
parameters o'
4thernet ports
-etting the
parameters o'
4thernet ports
2 -etting the
parameters o'
the 9?F4TH
ports
-etting the
parameters o'
the 9?F4TH
ports
-etting the
parameters o'
the 9?F4TH
ports
-etting the
parameters o' the
9?F4TH ports
-etting the
parameters o' the
9?F4TH ports
5 Con'iguring
the LA(
Con'iguring
the LA(
Con'iguring the
LA(
Con'iguring the
LA(
Con'iguring the
LA(
6 Con'iguring
the 4)Line
Con'iguring
the :in: Lin1
Con'iguring the
4"/-
Con'iguring the
4"/-
Con'iguring the
4"/-
D Con'iguring
the :o-
Con'iguring
the 4)Line
Con'iguring the
4)LA#
Con'iguring the 4)
LA#
Con'iguring the 4)
LA#
6 %eri'ying
4thernet
service
con'igurations
Con'iguring
the :o-
Con'iguring the
:o-
Con'iguring the
:o-
Con'iguring the
:o-
C %eri'ying
4thernet
service
con'igurations
%eri'ying
4thernet service
con'igurations
%eri'ying 4thernet
service
con'igurations
%eri'ying 4thernet
service
con'igurations
Note(
indicates that the con'iguration item is optional. Con'igure the services according to the service
re<uirements.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services
%LA#),ased 4)Line
services0
:in:),ased 4)Line
services0
-etting the layer
2 attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting
general
attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting
general
attri,utes
/orts on an
4thernet ,oard
9?F4TH
ports
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the layer
2 attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting general
attri,utes
-etting the /arameters o' 4thernet /orts
The general attri,utes o' an 4thernet port de'ine the physical)layer in'ormation, such as the port mode,
encapsulation type, and maAimum 'rame length.
9n the case o' used ports, set 7na8%e Port to 7na8%e. 9n the case o' unused ports, set 7na8%e Port to 1isa8%e.
4ncapsulation Type
9n the case o' /2/ 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services, set 7ncapsu%ation Type to Nu%%.
9n the case o' %LA#),ased 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services, set 7ncapsu%ation Type to
)02.14.
9n the case o' :in:),ased 4)Line services and 9444 ;02.&ad ,ridge),ased 4)LA# services, i' a *#9 can access untagged
'rames, set 7ncapsu%ation Type to N5!!. 9' a *#9 can access tagged 'rames only, set 7ncapsu%ation Type to )02.14. 9n
the case o' an ##9 port, set 7ncapsu%ation Type to >in>.
9n the case o' an 4thernet port that is connected to the eAternal e<uipment, set =or"ing *oe to a value the same as that o'
the eAternal e<uipment. 7(enerally, =or"ing *oe o' the eAternal e<uipment is set to 6uto.Negotiation. 9n the case o' the
4thernet ports within the networ1, set =or"ing *oe to 6uto.Negotiation.
+hen G*3. 'rames are transmitted, set *a2 $ra3e !ength @8yteA according to the actual length o' the G*3. 'rames.
therwise, it is recommended that you set *a2 $ra3e !ength @8yteA to 1+:,.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
A'ter the tra''ic control is ena,led, i' the lin1 is congested, the 4thernet port sends the /A*-4 'rame to
noti'y the peer end o' stopping the transmission o' 4thernet pac1ets 'or a period, thus eliminating the
lin1 congestion.
"e<uired when the 'low control 'unction is ena,led on the eAternal e<uipment to which the 4thernet
port is connected. -et the parameters as 'ollows0
+hen the eAternal e<uipment uses the non)auto)negotiation 'low control 'unction, set Non.
6utonegotiation $%o' Contro% *oe to 7na8%e Sy33etric $%o' Contro%.
+hen the eAternal e<uipment uses the auto)negotiation 'low control 'unction, set 6uto.
Negotiation $%o' Contro% *oe to 7na8%e Sy33etric $%o' Contro%.
-etting the layer
2 attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting general
attri,utes
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
?or /2/ 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services0 Hou do not need to set the layer 2 attri,utes.
?or %LA#),ased 4)Line services and 9444 ;02.& ,ridge),ased 4)LA# services0 9' all the accessed services carry %LA#
tags 7tagged 'rames8, set Tag to Tag 6'are. 9' none o' the accessed services carries %LA# tags 7untagged 'rames8, set
Tag to 6ccess. 9' the access services contain ,oth tagged 'rames and untagged 'rames, set Tag to 0y8ri. -et 1efau%t
V!6N #1 and V!6N Priority according to the networ1 planning in'ormation.
?or :in:),ased 4)Line services and 9444 ;02.&ad ,ridge),ased 4)LA# services0 9n the case o' a *#9 port, i'
7ncapsu%ation Type is set to )02.14, Tag must ,e set to Tag 6'are 7de'ault value8. 9n the case o' an ##9 port that is
connected to the eAternal e<uipment, set >in> Type 1o3ain according to the T)/92 o' the -%LA# that is supported ,y
the eAternal e<uipment. 9n the case o' an ##9 port within the networ1, set >in> Type 1o3ain to the de'ault value.
-etting the layer
2 attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting general
attri,utes
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-etting the /arameters o' 4thernet /orts
The advanced attri,utes o' 4thernet ports are used to con'igure the 3AC>/HH loop,ac1 and <uery the tra''ic rate on
the ports.
"e<uired when you need to ena,le the port sel')loop test and automatic loop,ac1 shutdown 'unctions or to ena,le the
,roadcast pac1et suppression 'unction. -et !oop8ac" Chec", !oop8ac" Port Shuto'n, 7na8%ing &roacast Pac"et
Suppression, and &roacast Pac"et Suppression Thresho% according to the re<uirements.
-etting the layer
2 attri,utes
Con'iguring the
tra''ic control
-etting the
advanced
attri,utes
-etting general
attri,utes
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services
4ncapsulation Type
9n the case o' /2/ 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services, set
7ncapsu%ation Type to Nu%%.
9n the case o' %LA#),ased 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services,
set 7ncapsu%ation Type to )02.14
9n the case o' :in:),ased 4)Line services and 9444 ;02.&ad ,ridge),ased 4)LA#
services, i' a *#9 can access untagged 'rames, set 7ncapsu%ation Type to N5!!. 9' a *#9
can access tagged 'rames only, set 7ncapsu%ation Type to )02.14. 9n the case o' an ##9
port, set 7ncapsu%ation Type to >in>
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
The Layer 2 attri,utes o' the 9?)4TH port speci'y the relevant in'ormation a,out the lin1 layer, including the
tag attri,ute and :in: type domain.
-etting the /arameters o' 9?F4TH /orts
-etting the layer
2 attri,utes
-etting the
advanced
attri,utes
-etting general
attri,utes
?or /2/ 4)Line services and 9444 ;02.&d ,ridge),ased 4)LA# services0 Hou do not need to set the
layer 2 attri,utes.
?or %LA#),ased 4)Line services and 9444 ;02.& ,ridge),ased 4)LA# services0 9' all the accessed
services carry %LA# tags 7tagged 'rames8, set Tag to Tag 6'are. 9' none o' the accessed services
carries %LA# tags 7untagged 'rames8, set Tag to 6ccess. 9' the access services contain ,oth tagged
'rames and untagged 'rames, set Tag to 0y8ri. -et 1efau%t V!6N #1 and V!6N Priority according to
the networ1 planning in'ormation.
?or :in:),ased 4)Line services and 9444 ;02.&ad ,ridge),ased 4)LA# services0 9n the case o' a *#9
port, i' 7ncapsu%ation Type is set to )02.14, Tag must ,e set to Tag 6'are 7de'ault value8. 9n the case
o' an ##9 port that is connected to the eAternal e<uipment, set >in> Type 1o3ain according to the T)
/92 o' the -%LA# that is supported ,y the eAternal e<uipment. 9n the case o' an ##9 port within the
networ1, set >in> Type 1o3ain to the de'ault value.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
+hen the 9?F4TH port transmits an 4thernet service that permits ,it errors, such as a voice service
or a video service, you can set 7rror $ra3e 1iscar to 1isa8%e.
-etting the /arameters o' 9?F4TH /orts
-etting the layer
2 attri,utes
-etting the
advanced
attri,utes
-etting general
attri,utes
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services
Lin1 aggregation allows multiple lin1s that are attached to the same e<uipment to ,e aggregated to
'orm a lin1 aggregation group 7LA(8 so that the ,andwidths and availa,ility o' the lin1s increase.
The aggregated lin1s can ,e considered as a single logical lin1. "e<uired i' the LA( is con'igured to
protect the ?4>(4 ports or i' the Hy,rid radio uses the #=0>!/9C con'iguration mode.
In the %a!e of FE/1E &ort!' !et $oad S"aring to the !ame *alue
a! the o&&o!ite e#ui&ment. If the L01 i! %onfigured only to reali2e
&rote%tion' it i! %ommended that you !et $oad S"aring to &on(
S"aring for the e#ui&ment at "oth end!. If the L01 i! %onfigured to
in%rea!e the "andidth' it i! re%ommended that you !et $oad
S"aring to S"aring for the e#ui&ment at "oth end!. (hen the
+y"rid mi%roa*e u!e! the N.3/45IC %onfiguration mode' !et $oad
S"aring to S"aring for the e#ui&ment at "oth end!.
$et Main Board' Main Port' and Selected Sla*e Ports a%%ording
to the &lanning information. It i! re%ommended that you !et thi!
&arameter to the !ame *alue for the main and !la*e &ort! of the
L01! at "oth end!. The +y"rid/0M attri"ute! of the IF &ort! in the
L01! mu!t "e the !ame.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con!iguring t"e !69
Port Priority indicates the priorities o' the ports in a LA( as de'ined in the LAC/
protocol. The smaller the value, the higher the priority. +hen ports are added into a
LA(, the port o' the highest priority is pre'erred 'or service transmission.
-et Syste3 !oa Sharing 0ash 6%gorith3 to the same value as that o' the opposite
e<uipment. *nless otherwise speci'ied, this parameter ta1es the de'ault value. This
parameter is valid to only LA(s whose ILoad -haringJ is set to -haring. The load sharing
computation methods include03AC address speci'ic allocation 7,ased on the source 3AC
address, destination 3AC address, and !" ,etween source 3AC address and source
3AC address8, 9/ address speci'ic allocation 7,ased on the source 9/ address, destination
9/ address, and !" ,etween source 9/ address and destination 9/ address8.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services
Configuring the 6in6 link i! &rere#ui!ite for %onfiguring 6in6 &ri*ate line !er*i%e! and 738.)ad "ridge
!er*i%e!.
>in> !in" #1 speci'ies the 92 o' a :in: lin1. %alue range0 & to 62$6$6C2$D.
&oar speci'ies the ,oard that carries the :in: lin1. The 7ncapsu%ation Type
o' the port must ,e set to >in> during the con'iguration o' port parameters.
Port speci'ies the port that carries the :in: lin1. The 7ncapsu%ation Type o'
the port must ,e set to >in> during the con'iguration o' port parameters.
S.V%an #1 speci'ies the %LA# 92 7at the networ1 operator side8 'or the :in:
lin1. This parameter is set according to the planning in'ormation.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configurations of 7thernet Services
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Con!iguring t"e 7RPS
-elect Tag.Transparent
'rom the Tag Type drop)
down list.
Con'igured
ports
Clic1 Ne2t.
Configuring the )02.1 &rige.&ase
7.!6N Service @:A
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
The pti! "T# $00 has a de'ault 2- domain, 'or which *apping Re%ation #1 is set to 1 and
*apping Re%ation Na3e is set to 1efau%t *ap. .e'ore another 2- domain is created, all the ports
,elong to this de'ault 2- domain. The de'ault 2- domain cannot ,e modi'ied or deleted.
.y creating a 2i''-erv 72-8 domain, you can create the mapping relation o' a new 2- domain and con'igure the ports that
use this mapping relation.
/2/ transparently transmitted services support mapping the /H. service classes ,ased on the 2-C/ type only. The
de'ault 2-, however, maps the /H. service classes according to the CLA# priorities. Hence, you need to con'igure a new
2-.
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
.y changing the ports that use the 2- domain, you can add or delete a port that uses the 2-
domain and set the pac1et type over the port.
A port policy is re<uired when you need to apply 'or :o- policies other than 2- and port shaping 'or a
speci'ic port.
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configure the >oS
-et Po%icy #1 and Po%icy Na3e parameters o' the port policy. The
maAimum num,er o' port policies supported ,y the pti! "T# $00 is
56.
Con'igure the <ueue scheduling, policy weight, and <ueue shaping o' the port <ueue.
9roo3ing Po%ice 6fter Re%oaing0 -et the strict priority 7-/8 scheduling algorithm
according to the planning in'ormation. #ote that eAcept 'or the de'ault value, the value o' the
+"" scheduling algorithm and the value o' the -/ scheduling algorithm cannot ,e interleaved.
That is, eAcept 'or the de'ault value, 9roo3ing Po%ice 6fter Re%oaing can ,e changed 'rom
SP to =RR according to the <ueue priorities in a descending order 7C-C).48.
Po%icy =eight0 speci'ies the weight o' the policy in the +"" <ueue. The weight indicates
the percentage o' the ,andwidth resources o,tained ,y the +"" <ueue.
&an'ith !i3it0 indicates or speci'ies whether the tra''ic shaping 'unction is ena,led 'or
the /H. service class <ueues in the egress direction. C#R, P#R, C&S, P&S can ,e set only
when &an'ith !i3it is set to 7na8%e.
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
.y creating the tra''ic, you can con'igure ACL and CA" 'or a speci'ied tra''ic stream on a speci'ied
port.
This tas1 is re<uired when you need to per'orm the CA" or shaping operation 'or a speci'ic 'low over
the port.
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring
the >oS
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
A'ter creating a port policy, you need to set the port that uses the port policy. Through this tas1,
you can con'igure ACL and CA" 'or a speci'ic tra''ic stream on a speci'ied port.
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
.y con'iguring port shaping, you can con'igure tra''ic shaping 'or a port or an egress port <ueue.
This tas1 is re<uired i' you need to limit the egress port ,andwidth that an 4thernet service occupies.
Changing the
ports that use
the 2- domain
Creating a
port policy
Creating a
2- domain
Creating
the tra''ic
-etting the port that
uses the port policy
Con'iguring
port shaping
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuring the >oS
A maintenance domain 7328 de'ines the range and level o' the 4thernet A3. 32s o' di''erent
ranges and levels can provide users with di''erentiated A3 services.
This tas1 is re<uired in the case that the #4s where the two 4thernet inter'aces involved in the
service test are located. -et the main parameters as 'ollows0
The 32 names and levels o' di''erent #4s must ,e the same.
9n the test o' 4thernet services ,etween two edge nodes on the transport networ1, it is
recommended that you set *aintenance 1o3ain !eve% to ;. 9n the test o' 4thernet services
,etween two #4s within the transport networ1, set *aintenance 1o3ain !eve% to a value
less than 6. 9n the test o' 4thernet services ,etween two 4thernet ports on the same #4, set
*aintenance 1o3ain !eve% to a value less than that set in the test o' 4thernet services
,etween two #4s within the transport networ1.
An 32 can ,e divided into several independent maintenance associations 73As8. .y creating 3As,
you can associate speci'ic 4thernet services with 3As. This 'acilitates 4thernet A3 operations.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et Re%evant Service to the same service 'or the two #4s.
An 34/ is the starting and end positions o' all the A3 pac1ets. .y creating an 34/, you can
chec1 the 4thernet channel o' the 34/s that ,elong to a same 3A through the A3 operation.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et *aintenance 6ssociation Na3e to the value o' *aintenance 6ssociation Na3e that is
set in the preceding step.
-et &oar and Port to the 4thernet ports involved in the service test.
9n this eAample, 4thernet services ,etween two internal #4s on the transport networ1 are
tested. Hence, set 1irection to #ngress for the *7Ps.
The 3/ 92 is used to identi'y the 34/ during the L. test. Hence, set CC Status to 6ctive.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
To ensure that an 34/ can respond to the A3 operations initiated ,y the other 34/s
in the same 3A, you need to set the other 34/s to ,e the remote 34/s o' this 34/.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-et *aintenance 1o3ain Na3e to the value o' *aintenance 1o3ain Na3e that is set in the
preceding step.
-et *aintenance 6ssociation Na3e to the value o' *aintenance 6ssociation Na3e that is set
in the preceding step.
9' other 34/s may initiate A3 operations to an 34/ in the same 3A, set the other 34/s to ,e
the remote 34/s.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
2uring a loop,ac1 7L.8 test, you can chec1 the ,idirectional connectivity ,etween the source
34/ and any 34/ in the same 3A.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
-ource
maintenance point
in the L. test
2estination
maintenance point
in the L. test
Trans3itte Pac"et Count0 speci'ies the num,er o' pac1ets transmitted each time in the L. test. The
duration gets longer with the increase o' num,ers.
Trans3itte Pac"et !ength0 speci'ies the length o' a transmitted L.3 pac1et. 9' the pac1et length is
di''erent, the test result may ,e di''erent. 9n normal cases, it is recommended that you use the de'ault value.
Trans3itte Pac"et Priority0 speci'ies the priority o' transmitted pac1ets. 0 indicates the lowest priority,
and C indicates the highest priority. 9n normal cases, it is recommended that you set this parameter to the
highest priority.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Copyright 2006 Huawei Technologies Co., Ltd. All rights reserved.
Creating
an 3A
Creating an
34/ point
Creating
an 32
Creating
remote 34/s
in an 3A
Testing
4thernet
services
Verifying 7thernet Service Configurations
Clic1 Start Test. Then, the L. test result is displayed in the 1etection Resu%t pane.
2escri,es how to con'igure the radio lin1s o' pti! "T# $00
%&00"002