Professional Documents
Culture Documents
BASIC
LEARNING ACTIVITY 1
Job Instruction in operating lathe CNC
a. Learning Objectives
After following the lesson, student expected to be
able to:
1. know the form and format of job instruction used
2. Understand the content of job instruction correctly
3. do job instruction according to procedure and
standard job specified
4. Do job instruction according to standard and
procedure job specified
f) Running program
Cutter movement during running program must get attention
continuously
Stop running program by pushing button INP+FWD if there is
worry thing
SUMMARY
c. Summary 1
1.Job instruction is command of compiled job alternately to
guide execution of job
2.Job sequence to operate lathe of CNC consist of sequential
command as follow:
a. Entering program
b. Checking the correctness of program
c. checking the correctness of cutter trajector
d. Installing work object
e. Placing cutter on early path
f. Run the program
Task 1
1. Take one of the program sheet. Try to enter manually into
machine memory
2. Do running test program. If there is any mistyping or the other?
3. If there is one. Repairing the mistake and do running test
program again
4. Otherwise, if there is no mistake, do cutter trajectory tes. Use
ploter or pantograph to detect cutter motion. Is there any
motion direction / cutter trajectory which not ought to
FORMATIVE TEST
1. Job instructions are to:
a. give job order
b. guide job
c. turn around job
d. All the answers are correct
2. Job instruction must
a. brief and detail
b. well-understood
c. aplicable
d. All correct
FORMATIVE TEST
4. Well-applied job instruction can:
a. prevent operation error
b. prevent product failure
c. prevent negligence of operator )
d. All answers are correct
5. Every instruction should be equipped with:
a. product standard quality
b. machine operating condition
c. job condition
d. all answers are correct
6. Job instruction useful for
a. prevent process error
b. prevent trouble
c. prevent dangerous thing
d. prevent error