Professional Documents
Culture Documents
Requirement
1)All the FM EG must install the updated LMT,
which must match with the NodeB version.
Because if the LMT version is not match with each
other may cause some commands can not
execute.
2) Take all the tools which will use on the site.
3) confirm the alarms with MNOC, and take the
related spare parts
4)confirm the CWO.
---
END
0
0
0
YES
0
0
1
YES
0
0
2
NO
0
0
3
NO
0
0
4
NO
0
0
5
NO
0
0
6
NO
0
0
7
NO
0
0
8
NO
0
0
9
NO
0
0
10
YES
0
0
11
NO
0
0
12
YES
0
0
13
NO
0
0
14
NO
0
0
15
NO
0
0
16
YES
(Number of results = 17)
---
END
EBBI
EBBI
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown
NMPT
Unknown
NUTI
Unknown
Unknown
Unknown
NMON
LST ETHPORT:;
GND157
+++ GND157
2011-04-03 14:43:25
O&M #87758
%%/*26580*/LST ETHPORT:;%%
RETCODE = 0 Succeed.
---
END
LST VLANCLASS:;
GND157
+++ GND157
2011-04-03 15:38:04
O&M #87820
%%/*948*/LST VLANCLASS:;%%
RETCODE = 0 Succeed.
VLAN Priority Mapping Configuration
----------------------------------Traffic Type = USERDATA
User Data Service Priority = 0
Insert VLAN Tag = ENABLE
VLAN ID = 61
VLAN Priority = 0
Traffic Type = OM
Insert VLAN Tag = ENABLE
OM Vlan Difference = DISABLE
VLAN ID = 61
VLAN Priority = 3
---
END
LST SCTPLNK:;
GND157
+++ GND157
2011-04-03 14:45:38
O&M #87762
%%/*28353*/LST SCTPLNK:;%%
RETCODE = 0 Succeed.
LST IPPATH:;
GND157
+++ GND157
2011-04-03 14:46:24
O&M #87763
%%/*28983*/LST IPPATH:;%%
RETCODE = 0 Succeed.
IP Path Configuration
--------------------IP Path ID = 1
Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Sub Board Type = BASE_BOARD
Port Type = ETH
Port No. = 0
Join Resource Group = Disable
NodeB IP Address = 10.233.83.98
RNC IP Address = 10.235.13.201 (RNC DEVICE IP)
Differentiated Services Code Point = 46
Path Check = DISABLE
Rx Bandwidth(KBPS) = 100000 ( PATH BANDWIDE)
TX Bandwidth(KBPS) = 100000 ( PATH BANDWIDE)
Tx CBS(bit) = 50000000
Tx EBS(bit) = 0
FPMUX Switch = DISABLE
IP Path ID = 2
Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Sub Board Type = BASE_BOARD
Port Type = ETH
Port No. = 0
Join Resource Group = Disable
NodeB IP Address = 10.233.83.98
RNC IP Address = 10.235.13.201
Differentiated Services Code Point = 38
Path Check = DISABLE
Rx Bandwidth(KBPS) = 100000
TX Bandwidth(KBPS) = 100000
Tx CBS(bit) = 50000000
Tx EBS(bit) = 0
FPMUX Switch = DISABLE
IP Path ID = 3
Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Sub Board Type = BASE_BOARD
Port Type = ETH
Port No. = 0
Join Resource Group = Disable
NodeB IP Address = 10.233.83.98
RNC IP Address = 10.235.13.201
Differentiated Services Code Point = 22
Path Check = DISABLE
Rx Bandwidth(KBPS) = 100000
TX Bandwidth(KBPS) = 100000
Tx CBS(bit) = 50000000
Tx EBS(bit) = 0
FPMUX Switch = DISABLE
IP Path ID = 4
Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Sub Board Type = BASE_BOARD
Port Type = ETH
Port No. = 0
Join Resource Group = Disable
NodeB IP Address = 10.233.83.98
RNC IP Address = 10.235.13.201
Differentiated Services Code Point = 14
Path Check = DISABLE
Rx Bandwidth(KBPS) = 100000
TX Bandwidth(KBPS) = 100000
Tx CBS(bit) = 50000000
Tx EBS(bit) = 0
FPMUX Switch = DISABLE
(Number of results = 4)
LST IPRT:;
GND157
+++ GND157
2011-04-03 14:49:33
O&M #87768
%%/*31203*/LST IPRT:;%%
RETCODE = 0 Succeed.
IP Route Table
-------------Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Subboard Type = BASE_BOARD
Destination IP Address = 10.235.13.0
Destination IP Mask = 255.255.255.0
Route Type = NEXTHOP(Field of Next Hop IP is valid)
Next Hop IP = 10.233.83.102( PEAGG IP)
Preference = 60
---
END
TO RNC
PING: SRN=0, SN=12, IP="10.235.13.201", SRCIP="10.233.83.98",
CONTPING=DISABLE;
GND157
Reply from 10.235.13.201: bytes=32 Sequence=1 ttl=249 time=20 ms
Reply from 10.235.13.201: bytes=32 Sequence=2 ttl=249 time=1 ms
Reply from 10.235.13.201: bytes=32 Sequence=3 ttl=249 time=1 ms
Reply from 10.235.13.201: bytes=32 Sequence=4 ttl=249 time=1 ms
--- 10.235.13.201 ping statistics --4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/5/20 ms
--- END
Total: 11 packet(s) received.
RNC SIDE
List NodeB
---------NodeB Name = "GND157"
NodeB ID = 1918
Subrack No. = 0
Subrack name = WRSS
Slot No. = 4
Subsystem No. = 5
IUB Trans Bearer Type = IP transmission
IP Trans Apart Ind = Not support
IUB Trans Delay = 10
Satellite Trans Ind = False
NodeB Protocol Version = R7
Resource Management Mode = Share
NodeB Host Type = SingleHost
Peer RNC ID = <NULL>
Peer NodeB ID = <NULL>
Sharing Type Of NodeB = Dedicated
Cn Operator Index = 0
Administrative state = UNBLOCKED
(Number of results = 1)
List NodeB
---------Cell ID = 7384
Cell Name = GND157A
Cell ID = 7385
Cell Name = GND157B
Cell ID = 7386
Cell Name = GND157C
Cell ID = 20191
Cell Name = GND157E
Cell ID = 20192
Cell Name = GND157F
Cell ID = 20193
Cell Name = GND157G
Cell ID = 34827
Cell Name = GND157I
Cell ID = 34828
Cell Name = GND157J
Cell ID = 34829
Cell Name = GND157K
(Number of results = 9)
List NodeB
---------NodeB Name = "GND157"
Bearing Link Type = SCTP Link Type
SAAL link No. = <NULL>
SCTP link No. = 436
Main Link Type = <NULL>
Subrack No. = 0
Subrack name = WRSS
Slot No. = 4
Subsystem No. = 5
Iub Interface Port Type = NCP
(Number of results = 1)
List NodeB
---------Subrack No. = 0
Subrack name = WRSS
Slot No. = 4
SCTP link No. = 436
Signalling link mode = SERVER MOD
Application type = NBAP
Differentiated Service Codepoint = 46
Local SCTP port No. = <NULL>
First local IP address = 10.235.13.201
Second local IP address = <NULL>
First destination IP address = 10.233.83.98
Second destination IP address = <NULL>
Destination SCTP port No. = 3980
Logic Port Flag = NO
Logic Port Slot No. = <NULL>
Logic Port No. = <NULL>
RTO min value = 1000
RTO max value = 3000
RTO initial value = 1000
RTO alpha value = 12
RTO beta value = 25
Heartbeat interval = 5000
Association max retrans = 10
Path max retrans = 5
Calculate checksum when send message = NO
Calculate checksum when receive message = NO
Checksum arithmetic = CRC32
MTU value = 800
VLANID Flag of First Local IP address = DISABLE
VLAN ID of First Local IP address = <NULL>
VLANID Flag of Second Local IP address = DISABLE
VLAN ID of Second Local IP address = <NULL>
Cross IP address available flag = UNAVAILABLE
Switch primary IP address flag = YES
Switch back HB number = 10
Bundling Flag = NO
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List NodeB
---------NodeB Name = "GND157"
Port No. = 0
Bearing Link Type = SCTP Link Type
SAAL link No. = <NULL>
SCTP link No. = 437
Main Link Type = <NULL>
Subrack No. = 0
Subrack name = WRSS
Slot No. = 4
Subsystem No. = 5
Iub Interface Port Type = CCP
(Number of results = 1)
---------Subrack No. = 0
Subrack name = WRSS
Slot No. = 4
SCTP link No. = 437
Signalling link mode = SERVER MOD
Application type = NBAP
Differentiated Service Codepoint = 46
Local SCTP port No. = <NULL>
First local IP address = 10.235.13.201
Second local IP address = <NULL>
First destination IP address = 10.233.83.98
Second destination IP address = <NULL>
Destination SCTP port No. = 3981
Logic Port Flag = NO
Logic Port Slot No. = <NULL>
Logic Port No. = <NULL>
RTO min value = 1000
RTO max value = 3000
RTO initial value = 1000
RTO alpha value = 12
RTO beta value = 25
Heartbeat interval = 5000
Association max retrans = 10
Path max retrans = 5
Calculate checksum when send message = NO
Calculate checksum when receive message = NO
Checksum arithmetic = CRC32
MTU value = 800
VLANID Flag of First Local IP address = DISABLE
VLAN ID of First Local IP address = <NULL>
VLANID Flag of Second Local IP address = DISABLE
VLAN ID of Second Local IP address = <NULL>
Cross IP address available flag = UNAVAILABLE
Switch primary IP address flag = YES
Switch back HB number = 10
Bundling Flag = NO
(Number of results = 1)
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List NodeB
---------Adjacent Node ID = 1918
Adjacent Node Name = GND157
Adjacent Node Type = Iub Interface
NodeB ID = 1918
SGSN FLAG = <NULL>
Transport Type = IP
DPX Index = <NULL>
Is Root Node = <NULL>
Upper Ani = <NULL>
Subrack No. = <NULL>
Slot No. = <NULL>
SAAL link No. = <NULL>
Qaal2 Protocol Version = <NULL>
(Number of results = 1)
List NodeB
---------Adjacent Node ID = 1918
IP path ID = 1
Interface Type = Iub Interface
Transport Type = IP
IP path type = EF
Local IP address = 10.235.13.201
Peer IP address = 10.233.83.98
Peer subnet mask = 255.255.255.255
Forward Bandwidth = 100000
Backward Bandwidth = 100000
Carry Flag = NULL
IP Logic Port Slot No. = <NULL>
IP Logic Port No. = <NULL>
Rscgrp No. = <NULL>
TRM load threshold index = 2
VLANID Flag = Disable
VLAN ID. = <NULL>
IP path check flag = Disabled
Check IP address = <NULL>
Ping Check Period = <NULL>
Ping Check Timeout Counts = <NULL>
ICMP packet Length = <NULL>
(Number of results = 1)
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List NodeB
---------Adjacent Node ID = 1918
IP path ID = 2
Interface Type = Iub Interface
Transport Type = IP
IP path type = AF43
Local IP address = 10.235.13.201
Peer IP address = 10.233.83.98
Peer subnet mask = 255.255.255.255
Forward Bandwidth = 100000
Backward Bandwidth = 100000
Carry Flag = NULL
IP Logic Port Slot No. = <NULL>
IP Logic Port No. = <NULL>
Rscgrp No. = <NULL>
TRM load threshold index = 2
VLANID Flag = Disable
VLAN ID. = <NULL>
IP path check flag = Disabled
Check IP address = <NULL>
Ping Check Period = <NULL>
Ping Check Timeout Counts = <NULL>
ICMP packet Length = <NULL>
(Number of results = 1)
To be continued...
--- END
+++ Dahran_3RD07
2011-04-03 14:51:52
O&M #467103
%%/*610981*/LST UNODEB: LSTTYPE=BYNODEBNAME, NodeBName="GND157";%%
RETCODE = 0 Execution succeeded.
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List NodeB
---------Adjacent Node ID = 1918
IP path ID = 3
Interface Type = Iub Interface
Transport Type = IP
IP path type = AF23
Local IP address = 10.235.13.201
Peer IP address = 10.233.83.98
Peer subnet mask = 255.255.255.255
Forward Bandwidth = 100000
Backward Bandwidth = 100000
Carry Flag = NULL
IP Logic Port Slot No. = <NULL>
IP Logic Port No. = <NULL>
Rscgrp No. = <NULL>
TRM load threshold index = 2
VLANID Flag = Disable
VLAN ID. = <NULL>
IP path check flag = Disabled
Check IP address = <NULL>
Ping Check Period = <NULL>
Ping Check Timeout Counts = <NULL>
ICMP packet Length = <NULL>
(Number of results = 1)
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List NodeB
---------Adjacent Node ID = 1918
IP path ID = 4
Interface Type = Iub Interface
Transport Type = IP
IP path type = AF13
Local IP address = 10.235.13.201
Peer IP address = 10.233.83.98
Peer subnet mask = 255.255.255.255
Forward Bandwidth = 100000
Backward Bandwidth = 100000
Carry Flag = NULL
IP Logic Port Slot No. = <NULL>
IP Logic Port No. = <NULL>
Rscgrp No. = <NULL>
TRM load threshold index = 2
VLANID Flag = Disable
VLAN ID. = <NULL>
IP path check flag = Disabled
Check IP address = <NULL>
Ping Check Period = <NULL>
Ping Check Timeout Counts = <NULL>
ICMP packet Length = <NULL>
(Number of results = 1)
List NodeB
---------IP address = 10.235.13.201
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Device IP Address Type = Logical IP Address
Subnet mask = <NULL>
MTU[Byte] = <NULL>
(Number of results = 1)
List IP Path
-----------Adjacent Node ID = 1918
IP path ID = 1
Interface Type = Iub Interface
Transport Type = IP
IP path type = EF
Local IP address = 10.235.13.201
Peer IP address = 10.233.83.98
Peer subnet mask = 255.255.255.255
Forward Bandwidth = 100000
Backward Bandwidth = 100000
Carry Flag = NULL
IP Logic Port Slot No. = <NULL>
IP Logic Port No. = <NULL>
Rscgrp No. = <NULL>
TRM load threshold index = 2
VLANID Flag = Disable
VLAN ID. = <NULL>
IP path check flag = Disabled
Check IP address = <NULL>
Ping Check Period = <NULL>
Ping Check Timeout Counts = <NULL>
ICMP packet Length = <NULL>
---
END
List IP Route
------------Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.231.83.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193( NE40E IP ADDRESS)
Priority = HIGH
Purpose description = IP NODEB OMRT
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.13.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = IP NODEB RT
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.79.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = NodeB IPRT
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.80.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = IUB -IPRT
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.83.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = IP-NODEB
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.84.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = NodeB IPRT
Subrack No. = 0
Subrack name = WRSS
Slot No. = 18
Destination IP address = 10.233.120.0
Destination address mask = 255.255.255.0
Forward route address = 10.235.13.193
Priority = HIGH
Purpose description = IUB-IPRT
(Number of results = 7)
To NE40E
PING IP: SRN=0, SN=18, SIPADDR="10.235.13.201",
DESTIP="10.235.13.193", CONTPING=NO;
3RD07
Reply from 10.235.13.193: bytes=56 Sequence=1 ttl=255 time=4 ms
Reply from 10.235.13.193: bytes=56 Sequence=2 ttl=255 time=4 ms
Reply from 10.235.13.193: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 10.235.13.193: bytes=56 Sequence=4 ttl=255 time=6 ms
--- 10.235.13.193 ping statistics --4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 4/4/6 ms
10 reports in total
(Number of results = 1)
--- END
Total: 11 packet(s) received.
to PEAGG
PING IP: SRN=0, SN=18, SIPADDR="10.235.13.201",
DESTIP="10.233.83.102", CONTPING=NO;
3RD07
Reply from 10.233.83.102: bytes=56 Sequence=1 ttl=251 time=5 ms
Reply from 10.233.83.102: bytes=56 Sequence=2 ttl=251 time=3 ms
Reply from 10.233.83.102: bytes=56 Sequence=3 ttl=251 time=3 ms
Reply from 10.233.83.102: bytes=56 Sequence=4 ttl=251 time=4 ms
--- 10.233.83.102 ping statistics --4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 3/3/5 ms
10 reports in total
(Number of results = 1)
--- END
Total: 11 packet(s) received.
TO NodeB
PING IP: SRN=0, SN=18, SIPADDR="10.235.13.201",
DESTIP="10.233.83.98", CONTPING=NO;
3RD07
Reply from 10.233.83.98: bytes=56 Sequence=1 ttl=251 time=7 ms
Reply from 10.233.83.98: bytes=56 Sequence=2 ttl=251 time=5 ms
Reply from 10.233.83.98: bytes=56 Sequence=3 ttl=251 time=9 ms
Reply from 10.233.83.98: bytes=56 Sequence=4 ttl=251 time=4 ms
--- 10.233.83.98 ping statistics --4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 4/6/9 ms
10 reports in total
(Number of results = 1)
--- END
Total: 11 packet(s) received.
NodeB ID = 1918
NodeB name = GND157
Flag of NodeB controllable = YES
NodeB state = Available
SAAL link No. = <NULL>
SCTP link No. = 436
NCP operation state = Available
(Number of results = 1)
---
END
Cell ID = 7385
Cell name = GND157B
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 7386
Cell name = GND157C
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 20191
Cell name = GND157E
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 20192
Cell name = GND157F
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 20193
Cell name = GND157G
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 34827
Cell name = GND157I
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 34828
Cell name = GND157J
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
Cell ID = 34829
Cell name = GND157K
Operation state = Available
Administrative state = Unblocked
State explanation = Cell is setup and enabled
(Number of results = 9)
1
34827
157
2
34828
157
3
34829
157
4
7384
157
5
7385
157
6
7386
157
7
20191
157
8
20192
157
9
20193
157
(Number of results = 9)
0
1
2
0
1
2
0
1
2
1
1
1
0
0
0
1
1
1
4000
4000
4000
4000
4000
4000
4000
4000
4000
DL BB Resour
15
15
15
150
150
150
15
15
15
Local Cell ID = 5
Cell ID = 7385
T Cell(256chips) = 1
UL Frequency Channel Number = 9888
DL Frequency Channel Number = 10838
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 38
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 1
Cell ID = 34827
T Cell(256chips) = 3
UL Frequency Channel Number = 9808
DL Frequency Channel Number = 10758
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 30
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 2
Cell ID = 34828
T Cell(256chips) = 4
UL Frequency Channel Number = 9808
DL Frequency Channel Number = 10758
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 38
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 6
Cell ID = 7386
T Cell(256chips) = 2
UL Frequency Channel Number = 9888
DL Frequency Channel Number = 10838
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 46
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 8
Cell ID = 20192
T Cell(256chips) = 4
UL Frequency Channel Number = 9783
DL Frequency Channel Number = 10733
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 38
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 3
Cell ID = 34829
T Cell(256chips) = 5
UL Frequency Channel Number = 9808
DL Frequency Channel Number = 10758
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 46
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 7
Cell ID = 20191
T Cell(256chips) = 3
UL Frequency Channel Number = 9783
DL Frequency Channel Number = 10733
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 30
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 9
Cell ID = 20193
T Cell(256chips) = 5
UL Frequency Channel Number = 9783
DL Frequency Channel Number = 10733
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 46
Cell Transmit Diversity Indication = Inactive
Local Cell ID = 4
Cell ID = 7384
T Cell(256chips) = 0
UL Frequency Channel Number = 9888
DL Frequency Channel Number = 10838
Max Transmission Power(0.1dBm) = 460
Primary Scrambling Code = 30
Cell Transmit Diversity Indication = Inactive
(Number of results = 9)
RETCODE = 0
Succeed.
E1T1 Status
Cabinet No.
Master
Cabinet No.
Master
Subrack No.
Subrack No.
Slot No.
12
Slot No.
12
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
Port No.
Port No.
Link Status
Normal
Link Status
Normal
Cabinet No.
Master
Cabinet No.
Master
Subrack No.
Subrack No.
Slot No.
12
Slot No.
12
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
Port No.
Port No.
Link Status
Normal
Link Status
Normal
Cabinet No.
Master
Cabinet No.
Master
Subrack No.
Subrack No.
Slot No.
12
Slot No.
12
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
Port No.
Port No.
Link Status
Normal
Link Status
Normal
DSP IMAGRP:;
GND105
+++ GND105
2011-04-04 16:36:04
O&M #47641
%%/*58850*/DSP IMAGRP:;%%
RETCODE = 0 Succeed.
---
END
DSP IMALNK:;
IMALink Status
Cabinet No.
Master
Cabinet No.
Master
Cabinet No.
Master
Subrack No.
Subrack No.
Subrack No.
Slot No.
12
Slot No.
12
Slot No.
12
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
=
=
0
0
2
0
=
=
4
0
NE Tx State
Active
NE Tx State
Active
NE Tx State
Active
NE Rx State
Active
NE Rx State
Active
NE Rx State
Active
FE Tx State
Active
FE Tx State
Active
FE Tx State
Active
FE Rx State
Active
FE Rx State
Active
FE Rx State
Active
NE Rx Failure
No failure
NE Rx Failure
No failure
NE Rx Failure
No failure
FE Rx Failure
No failure
FE Rx Failure
No failure
FE Rx Failure
No failure
Cabinet No.
Master
Cabinet No.
Master
Cabinet No.
Master
Subrack No.
Subrack No.
Subrack No.
Slot No.
12
Slot No.
12
Slot No.
12
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
Subboard Type
BASE_BOARD
=
=
1
0
3
0
=
=
5
0
NE Tx State
Active
NE Tx State
Active
NE Tx State
Active
NE Rx State
Active
NE Rx State
Active
NE Rx State
Active
FE Tx State
Active
FE Tx State
Active
FE Tx State
Active
FE Rx State
Active
FE Rx State
Active
FE Rx State
Active
NE Rx Failure
No failure
NE Rx Failure
No failure
NE Rx Failure
No failure
LST LNKSRC:;
GND105
+++ GND105
2011-04-04 16:35:24
O&M #47639
%%/*58412*/LST LNKSRC:;%%
RETCODE = 0 Succeed.
---
END
---
---
END
END
---
Waiting for 5 minutes if the issue is also not solved, RST NODEB:;
END
2) IP CLOCK ISSUE
LST IPCLKLNK:;
GND157
+++ GND157
2011-04-04 17:57:01
O&M #89472
%%/*38148*/LST IPCLKLNK:;%%
RETCODE = 0 Succeed.
---
END
---
---
END
END
--- END
Waiting for 5 minutes if the issue is also not solved, RST NODEB:;
IP CLOCK IP ADDRESS
Site Name
Site
Element Code No
Service IP1
Service IP2
Dhahran
308-00-000
308/3RD07&3RD08
10.235.13.84
10.235.13.85
Lasilki
302-00-000
302/3RD05
10.235.12.84
10.235.12.85
Khobar
304-00-000
406/3RD06
10.235.18.84
10.235.18.85
Hail
611-00-000
441/3RH01
10.235.17.84
10.235.17.85
Salman
405-00-000
431/3RS02
10.235.8.84
10.235.8.85
Qassim
602-00-000
421/3RU04&3RU05
10.235.10.84
10.235.10.85
RET ALARM
1)
SOFTWARE REASON
2)
HARD WARE REASON
a. CABLE ISSUE between SMBT and RCU
b. SMBT ISSUE
C. RCU ISSUE
3)
COMMANDS WHICH WILL BE USED
a. DSP ANTTILT
b. LST ALD
c. RMV ALD
d. ADD ALD
e. SET ALDPWRSW
f. SET ANTTILT
g. CLB ANT
1)If you received the TT about the ALD&RET, Please first try to use software
configuration to solve.
+++ G30400
2010-10-19 15:50:18
O&M #185099
%%LST ALD: OPMODE=NAME;%%
RETCODE = 0 Succeed.
---
END
+++ G30400
2010-10-19 15:44:50
O&M #185070
%%DSP ANTTILT: OPMODE=NAME;%%
RETCODE = 0 Succeed.
(Number of results = 3)
If it has the RET Antenna Not Calibrated alarm, please use this
command to solve it.
CLB ANT: OPMODE=NAME, NAME="0_0N0A0RET_3G";
If the alarm is solved, please execute the command again:
SET ANTTILT: OPMODE=NAME, NAME="0_0N0A0RET_3G",
TILT=85;
RTWP ALARM
1)The Received Total Wideband Power (RTWP) is the
received wideband power in an uplink channel band
measured at the UMTS Terrestrial Radio Network Access
(UTRAN) access point. You can calibrate the gain of
uplink RF channels through RTWP measurement. The
NodeB RTWP test has impact on the services.
2)The reference standards for the RTWP measurement are
as follows:
a.If the NodeB is disconnected from the antenna system or
carries a unmatched load, the reported RTWP is about
-108 dBm. If the NodeB is connected to the antenna
system with the TMA started or carries a matched load,
the reported RTWP is about -105 dBm.
b.If the services are normal and the UL load reaches 75%,
the RTWP is 6 dB higher than the RTWP measured
when the NodeB carries no service.
1-1: frequency
1-2: the RTWP of the main RX channel
1-3: the RTWP of the diversity RX channel
the RTWP of the diversity RX
channel
This alarm is reported when the difference
between the RTWP of the main RX
channel and the RTWP of the diversity
RX channel exceeds 6dB. (1-2 13)/10
commands
REQ CMCTRL
FOC CMCTRL
LST BOOTPSWITCH:;
GND157
+++ GND157
2011-04-04 16:47:39
O&M #89394
%%/*53668*/LST BOOTPSWITCH:;%%
RETCODE = 0 Succeed.
--- END
SET BOOTPSWITCH: BPT=120;
GND157
+++ GND157
2011-04-04 16:48:01
O&M #89395
%%/*53979*/SET BOOTPSWITCH: BPT=60;%%
RETCODE = 0 Succeed.
---
END
LST ALMAF:;
GND157
+++ GND157
2011-04-04 16:48:54
O&M #89400
%%/*54585*/LST ALMAF:;%%
RETCODE = 0 Succeed.
---
LST OMCH:;
GND157
+++ GND157
2011-04-04 16:49:31
O&M #89402
%%/*55015*/LST OMCH:;%%
RETCODE = 0 Succeed.
OM Channel Configuration
-----------------------Flag = MASTER
Local IP Address = 152.97.65.25
Local IP Mask = 255.255.255.248
Peer IP Address = 10.233.83.102
Peer IP Mask = 255.255.255.248
Cabinet No. = Master
Subrack No. = 0
Slot No. = 12
Subboard Type = BASE_BOARD
Bear Type = IPV4
Binding Route = NO
(Number of results = 1)
---
END
END