Professional Documents
Culture Documents
Contents
Introduction
Objectives
Methodology
Facilities & Equipment
Utilization of Research Work
References
Application
Electrical conductors.
Transport.
Packaging.
Building and architecture.
High pressure gas cylinders.
Machined component.
Road barriers and signs.
Sports equipment
Miscellaneous application.
Anodizing
CONTD.
Anodizing of aluminum can be accomplished in a
Properties Enhanced
Increase corrosion resistance.
Improve decorative appearance.
Increase abrasion resistance.
Improve adhesive bonding.
Improve lubricity.
Objective
The objective of this research is to study the effect of
Methodology
Selection of a suitable specimen(Al-Mg alloy) preferably
AA5052.
Specimen will be etched in a solution contain NaOH.
For anodizing a thermostatic cell will be used as counter
electrode.
Anodizing will be carried out in sulphuric acid bath.
CONTD.
Temperature of the bath will be varied between 25 o and 60o
C.
Voltage will be kept constant at 15V.
DC power supply will be used.
After anodizing the specimen will be rinsed with deionized
water and dried in cool air stream.
Thickness of the oxide film will be measured by eddy
current.
EDX and SEM will be used to examine the resultant
specimen.
Facilities and
Equipment
Electrolyte Bath
Electrolyte
Al-Mg foil
SEM
EDX
Utilization of Research
The research will be helpful to academics and industries
Reference
[1] S.Theohar, Ch. Kontogeorgou, Effect of temperature on the
[4] G.R. Wakefield, R.M. Sharp, Appl. Surf. Sci. 51 (1991) 95.
[5] A.C. Crossland, G.E. Thompson, P. Skeldon, G.C. Wood,