You are on page 1of 15

Introduction to AVR

Microcontrollers

Presented By:
Robomart

Microcontroller ?
A microcontroller is a single chip, selfcontained computer.

History.
1. 1971 Texas Instrument calculator-on-a-chip TMS 1000, which
was a 4-bit microcontroller with built-in ROM and RAM.
2. 1976 Intel 8048 was one of Intel's first microcontrollers.

3. 1980 Intel 8051 followed in and became one of the most


popular microcontroller families.
4. 1996 Atmel AVR was one of the first microcontroller families
to use on-chip flash memory for program storage.

FEATURES OF AVR MICROCONTROLLER DEVELOPMENT BOARD

16 Kbytes of In-System Self-programmable Flash program memory.


512 Bytes EEPROM.
1 Kbyte Internal SRAM.
Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
Byte-oriented Two-wire Serial Interface.
Programmable Serial USART.
Master/Slave SPI Serial Interface.
Programmable Watchdog Timer with Separate On-chip Oscillator.
On-chip Analog Comparator.
32 Programmable I/O Lines.
Operating voltage from 5.0V - 25 V.
Onboard dc power supply unit.
Onboard power switch.
Onboard dc socket.

Onboard ISP connector.


Onboard 4x4 matrix keypad.
Onboard L293D motor driver.
Onboard 4-bit keypad.
Onboard ULN2803 IC.
Onboard 24Cxx EEPROM IC base.
Onboard DX130X RTC.
Onboard RESET switch.
Onboard DB9 female connector.
Onboard MAX232 IC.
Onboard ATMEGA16 microcontroller.
Onboard 4-multiplexed 7 Segment display.
Onboard CMOS battery clamp.

APPLICATION OF AVR MICROCONTROLLER BOARD:

XBee controlled Embedded System.


Cell phone Controlled robot (DTMF Based).
Line following Robot.
Obstacle Avoiding Robot.
CAN Based accident avoidance robot.
Clap operated robot.
RF Based robotic car.
Wall follower robot.
Micro mouse Robot.
Digital MP3 player.

External Memory interfacing using I2C.


Light Searching Robot.
Edge Avoiding Robot.
1 X atmega 16 controller board.
1 X atmega 16 microcontroller.
1 X MAX232 IC.
1 X DX130X RTC.

Components.
A Microcontroller has seven main components:
1-Central processing unit (CPU)
2-ROM
3-RAM
4-Input and Output
5-Timer
6-Interrupt circuitry
7-Buses
8-Oscillatory circuits

Advantages.
1. Cheap.
2. Very small in size.
3. Programming ofMicrocontrollers is simple to learn (c language or
Assembly).
4. Ability to simulate project before implementation.

AVR Microcontroller
The AVR architecture was conceived by two students at the
Norwegian Institute of Technology Alf-Egil Bogen and Vegard
Wollan

Devices range from 1 to


256KB

Pin count range from 8 to


100
Full code compatibility
Pin/feature compatible

AVR Architecture

Single-Chip Solution

Code Size and Execution Time

Support

Fully updated product web


Highly skilled Field Application
Engineers
Support mail handled by AVR
experts
Reference designs
Application notes
AVRfreaks community website

CONTACT US
C4/100,B5, First floor C-Block,
Above IOB Bank, Sec-31,
Noida-201301(UP) India
0120-4317229
+91-8744000555
admin@robomart.com
www.robomart.com

You might also like