<Change information classification in footer> Objective
Configure OSPF area as shown in the diagram
Ping from one loopback to other Check redundancy by shutting down one of the link and validate trace goes by another path
3 Nokia Solutions and Networks 2014
<Change information classification in footer> Instructions
1. Load Static routing topology
2. Add C3700 router R3 and put module NM-4T in slot 2 3. Make link from R1-R3 & R2-R3 4. Configure Loopback0 on R3 5. Remove static routes from R1 & R2 6. Configure OSPF processes on all three router 7. Make neighbors between R1-R2, R1-R3, R2-R3 8. Configure OSPF areas on links as shown in the topology
4 Nokia Solutions and Networks 2014
Verification Steps
1. Verify sh ip ospf nei and make sure all neigbors are up
5 Nokia Solutions and Networks 2014
Verification Steps
1. Verify sh ip ospf nei and make sure all neigbors are up