Professional Documents
Culture Documents
Configuration Overview
No rear
access needed
(Fans -
speed Door can open left or right
controlled
and Door Alarm
alarmed)
Site Controller
Single board
Base Radio
sheet metal
Only 2 modules inside in a sandwich: PA and
chassis Transceiver with controller
Hybrid Combiner
Content:
MTS controller architecture
MTS software elements
MTS configuration
MTS local software upgrade
MTS MMI commands and examples
MTS LEDs
MTS Logs
LNA +
Dupl +
LNA LNA
VSWR
(CAN)
GPS
Ant or GPS
Hybrid
Site
link
Power
220V TX 3 x RX TX 3 x RX
WAN GPS uP
Fan
PSU (CAN SC BR BR
(CAN) via
PSU)
IAC CAN X uP uP
Batteries
-------------
|Service|
| SC1 |
| SC2 |
-------------
SC1
SC2
TETRA applications:
Boot1 brc.code.x Boot1
Test App + tsc.code.x Test App
SC BR
Configuration storage:
SC
Configuration file (tsc.cf.x) in SC file system
Operating system variables (board params) in SC flash
NVM in SC flash
BR
Configuration file (brcxx.cf.x) in SC file system
Operating system variables (board params) in BR flash
NVM in BR flash + EEProm
Operating system variables should automatically be kept in
sync with NVM variabls
Motorola Document Classification, File Name, Rev Number
Add additional legal text here if required by your local Legal Counsel.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2005
MTS configuration
TETRA application:
Can be done using TESS as on the EBTS
Only Ethernet connection is needed
Boot software and test application:
Must be done using manual procedures
Requires both RS232 and Ethernet connection
PC
TFTP server running with required binary files (e.g. 3COM
server)
Serial terminal / TELNET client installed (e.g. TESS)
Static IP address (10.0.253.100)
Connected to the SC using both serial and Ethernet
connction
Test App:
Install / upgrade of:
reset vector, boot0, boot1 and test app
Boot1:
Install / upgrade of:
boot0, boot1, test app and TETRA application
can mirror
View and edit the track ID to Enable / disable port mirroring (for
device relationship BLOB logs)
dpm port
Perform operations on the DPM, Enable / disable ports on the SC
e.g. get forward power pmdumps / pmdsave
psu View / save core dumps
Perform operations on the PSU,
e.g. get battery voltage
atc
Perform operations on the ATCC