Professional Documents
Culture Documents
*NODE
NID X Y Z TC RC
*PART
PID SID MID …
*SECTION_SHELL
SID EFORM SHRF NIP PROPT QR …
*MAT_ELASTIC
MID RO E PR DA DB K
*NODE
FORMAT: (I8,3E16.0,2E8.0)
NID X Y Z TC RC
NID:- Node id
X,Y,Z – Co-ordinates
TC – Translational constrains (0-7)
RC – Rotational Constrains (0-7)
*ELEMENT
Here elemental connectivity and part ids are given.
*ELEMENT_SOLID
-To define 3D solid element
*ELEMENT_SHELL
-To define 3-4 noded elements (3d-shell,membrane,etc)
*ELEMENT_BEAM
-To define 2 noded elements (3d-beams,truss,etc.)
*ELEMENT_DISCRETE
-To define spring or dampers
*ELEMENT_MASS
-To define a lumped mass on node
*ELEMENT_SEATBELT
-To define a seat belt element
*SECTION
Here element formulation, integration rule, nodal
thicknesses, c/s properties are defined.
*SECTION_SHELL
Use default formulation for most of the cases
Thickness, formulation
*SECTION_SOLID
Formulation
*SECTION_BEAM
Use formulation 1 or 2
Beam section values
*Material
Here material properties are defined
MAT_ELASTIC (MAT1)
Density, Modulus, Poisson’s ratio
For parts not expected to yield
MAT_PIECEWISE_LINEAR_PLASTICITY
(MAT24)
Density, Modulus, Poisson’s ratio
Stress-strain curve or yield stress and tangent modulus
For parts which may yield/fail
MAT_RIGID (MAT20)
Density, Modulus, Poisson’s ratio
Model rigid parts
*DEFINE
*DEFINE_BOX
-Used to define box like volume. (Box volume is then
referenced in *initial_velocity, *contact, *load cards)
*DEFINE_COORDINATE_**
-Used to define local co-ordinate systems. (Referenced in
*load, *boundary cards)
*DEFINE_CURVE
-Used to define curves. (Referenced in *mat, *load cards)
*DEFINE_VECTOR
-Used to define vectors
*DEFINE_SD_ORIENTATION
-Used to define orientation vectors for spring and dampers.
*LOAD
*LOAD_NODE_POINT
-Used to define nodal forces on individual node
*LOAD_NODE_SET
-Used to define nodal forces on set of nodes
*LOAD_SEGMENT
-Used to define pressure on segment
*LOAD_SEGMENT_SET
-Used to define pressure on set of segments
*LOAD_SHELL_**
-Used to define pressure on one or more shell elements
*LOAD_BODY
-Used to define body loads ( accn and angular velocities)
*LOAD_RIGID_BODY
-Used to apply nodal forces to rigid body
*BOUNDARY
*BOUNDARY_PRESCRIBED_MOTION_OPT1_OPT
-Used to apply imposed nodal motion (disp, velocity or accn)
OPT1 can be:- NODE, SET, RIGID, RIGID_LOCAL
OPT2 can be:- ID
*BOUNDARY_SPC_OPT1_OPT2
-Used to define local co-ordinate systems. (Referenced in *load,
*boundary cards)
OPT1 can be:- NODE, SET
OPT2 can be:- ID
*CONTROL
*CONTROL_ENERGY – Control for energy dissipation (default)
*CONTROL_HOURGLASS – Hourglass control
*CONTROL_OUTPUT – To set output parameters
*CONTROL_PARALLEL – Controls parallel processing
*CONTROL_SHELL – Controls for computing shell response
*CONTROL_TERMINATION – Controls termination time
*CONTROL_TIMESTEP – Setting up time step
*CONTROL_ACCURACY – Control parameters for improving
accuracy of the solution