You are on page 1of 14

MANUAL

KOMPETENSI DASAR

• 3.4 Memahami Surat-Surat bisnis


sederhana.
TUJUAN PEMBELAJARAN
Peseta Didik Bisa Mengungkapkan
penggunaan peralatan diungkapkan
kembali dengan kata-kata sendiri
secara tepat.
HOW TO CHANGE THE OIL MOTORCYCLE
• 1. The first Set up your spot
2. Second put your bike on the side stand,center stand
or rear-stand if you.
3. Next allow the used /dirty oil to finish
draining while you take off the filter.
4.Then Instal a fresh drain plug crush
washer.
5. And then put the drain bolt back in.
6. After that prep the filter by filling it about
a quarter full of fresh oil.
7. Next, clear the filter area on the engine
or grime and wife a finger of fresh oil
around the area just to get good clean
contact.
8. If you haven’t already, move the dirty oil
away from the area so you don’t spill it.
9. Then clean it up, double check you’ve
returned all the caps and bolts, and you
are good to go.
10.Lastly, make double sure to check the
level again as well as the filter,drain bolt,
and fill cap tightness after your first ride.
• Congratulation!! Joob well
done..

You might also like