Professional Documents
Culture Documents
06/22/2017 – Ruslan A J
TRAINING ACTIVITIES
REPORT
Date & Time: 07/18/2017. 09:30 – 11:15
Trainer : Mochamad Rachmat
Topic : SME Level 1
Place : Training Center
Definition of SME
SME is abbreviation from Standard Manufacturing
Environment that is Establishing the factory and its
operating system to match expectations, in all
shoe factories producing for adidas groups.
Purpose of SME
Ensuring consistency in the use of technology and
production practices that produce the same
product quality and efficiency in safe and healthy
workplace.
NSP is Non Stop Production. That is the state where production lines
work at the expected speed without any interuption or termination
Normally means:
1. The production line can produce more output in the shortest
time
2. Maintain the continous output to reach the target according to
production time planned
3. Maintain the product quality in accordance with the expected
level by consumer
Some factor what causes the production stop
1. Speed loss such as low employee skill level
2. Quality loss such as too often repeat/repair work
3. Basic waste like unnecessary movement and over production
4. Operational loss such as less of material, insufficient personel and
broken machine
CEOE is Cell Effectiveness and Overall efficiency that is measurement
of availability, performance, and quality rate of a group of equipment
or processes.
CEOE = Availability x Performance x Quality rate
Operation time
Availability = Clean time available
• Revise the words in CTV Case Sharing • Complete product readiness CF Lite Racer
Handbook
Date & Time: 07/17/2017. 13:30 – 14:30
Guide : Kucep
Topic : Meeting CS3 Energy Cloud
Place : Technical Meeting Room